Which exhaust to choose for the Audi Q3 F3 / Q3 Sportback?
The second-generation Q3, code F3, receives in its 150 hp version a TFSI four-cylinder carefully tuned for quiet. For the Q3 and the Sportback alike, Rog makes a valved cat-back in 304 stainless steel or titanium, with the choice of a straight pipe or a resonator. This guide details the car before proposing the configurations that suit it.
Your valved exhaust for Audi Q3 / Q3 Sportback F3 TFSI is configured from your VIN, and the Audi Q3 / RS Q3 F3 Valved Exhaust page brings together every system we make for this generation.

Your Rog exhaust for Audi Q3 / Q3 Sportback F3
Configure my exhaustThe short answer.
- For
- Audi Q3 and Q3 Sportback F3, 150 hp TFSI four-cylinder, one product page
- Engine
- Turbo TFSI four-cylinder, 1.5 litres depending on the version
- Exhaust
- Valved cat-back, from the outlet of the downpipe to the tips
- Sound
- Straight pipe for the raw grain, or a rounder resonator
- Material
- 304 stainless steel, or brushed, gold or purple titanium
- Downpipe
- 200-cell or 100-cell downpipe, or catalyst-free, as an option
- Valves
- Fitted to the exhaust, operated by a Rog remote
- Lead time and warranty
- 20 working days of manufacturing, free delivery, 3-year warranty
Your vehicle.
All our exhausts for this generation, version by version, are brought together on one page: Audi Q3 / RS Q3 F3 Valved Exhaust.
The Q3 F3 is Audi's small SUV come of age: longer, roomier and better equipped than the first-generation Q3, it is aimed at families as much as at city drivers who want a high seating position. Its 150 hp version, the most common, is built on a turbo four-cylinder designed for economy. Here is what you need to know about this car before choosing an exhaust for it.
- Model
- Second-generation Audi Q3, code F3, 150 hp TFSI version
- Body styles
- Q3 and Q3 Sportback, on the same Rog product page
- Model years
- Since the end of 2018; the Sportback follows about a year later
- Engine
- Turbo TFSI four-cylinder of 1,498 cm³ for this version
- Power and torque
- 150 hp and 250 Nm, this torque held from 1,500 to 3,500 rpm
- Drivetrain
- Front-wheel drive
- Gearboxes
- Six-speed manual, or seven-speed dual-clutch S tronic
- Dimensions
- 4.48 m long for the Q3, about 1.46 tonnes unladen
A bigger second generation
Presented in the summer of 2018 and delivered from the end of the year, the second-generation Q3 receives a transverse platform shared with other models of the group. It gains in length, rear-seat space and digital equipment, with a renewed interior.
The Sportback appears a little later, at the end of 2019 or the start of 2020 depending on the market. It swaps the straight roof for a sloping roofline and a more raked tailgate. Under the floor, the layout changes little, which explains why a single Rog product page covers both body styles. The VIN, sent when you order, specifies the exact version of your car before we start manufacturing.
The 150 hp TFSI four-cylinder
In this version, the Q3 uses a 1,498 cm³ four-cylinder boosted by a turbocharger, which delivers 150 hp between 5,000 and 6,000 rpm and 250 Nm from 1,500 rpm. The torque stays flat up to 3,500 rpm, hence a flexibility appreciated in town as on B-roads.
Performance stays reasonable rather than thrilling: about 9.6 seconds from zero to 100 km/h with the manual gearbox, for a mass close to 1.46 tonnes. The engine is designed to use little fuel, and it succeeds. The Rog product page does not try to make it a different engine; it gives it back a voice.
The Q3 F3 range includes other engines. If your car is not a 150 hp, the VIN lets us check what exists before any manufacturing.
Power
Torque
Stage 2: published figures with the downpipe and an ECU remap carried out by a tuner.
Manual or S tronic, front-wheel drive
The 150 hp Q3 is ordered with a six-speed manual gearbox or with the seven-speed S tronic, a dual-clutch gearbox with quick shifts. The engine drives the front wheels.
These choices have no influence on the layout of the exhaust. The cat-back is made to the VIN, so your car's configuration is taken into account without you having to specify anything.
The TFSI's voice as Audi delivers it
A turbo four-cylinder has a rather technical, slightly muted timbre that brightens as the revs climb. Nothing more normal for an engine tuned first for efficiency.
In a standard Q3, it stays almost anonymous. The silencers of the original exhaust smother it, and the cabin insulation does the rest: on board you mostly perceive wind and tyres, very little engine. This small TFSI deserves better, though, because it responds well to a freer layout.
What the Rog exhaust changes
With the valves open, the TFSI finds a fuller tone, a bass that settles in from the first revs and, on lifting off, small, crisp crackles without excess. The Q3 keeps its SUV look, but at last it makes itself heard.
With the valves closed, the Q3 returns to its peaceful family-car face: school runs, ring road, motorway, without tiresome drone. The two roles thus share the same car.
On our scale of 0 to 10, the factory exhaust sits at around 3; the Rog cat-back alone reaches 7, valves open.
The valves: fitted by Rog and operated remotely
The exhaust is delivered with fitted valves, connected to a small control unit in the boot, and a remote controls them. Open, they stay open; closed, they stay closed. The volume is yours at every moment.
Rog makes the exhaust to the VIN, and your garage fits it without welding or cutting, with clamps and gaskets.
Straight pipe or resonator
The character of the sound is set at the same price. The straight pipe keeps the raw edge of the TFSI, unfiltered, with crisp attacks. The resonator offers a rounder, slightly softer voice, which suits drivers who regularly cover long main roads.
In both cases, the exhaust keeps its sporty temperament: only the roundness of the note varies, not its assurance.
Q3, Sportback and the group's compact SUVs
The Q3 F3 shares its platform with other compact models of the Volkswagen group, which gives it a sound chassis base and a wide variety of engines. Its role at Audi is clear: to offer an entry-level SUV without giving up either interior quality or comfort equipment.
In this context, the 150 hp version looks like the reasonable choice, and it is often the one you meet outside schools. Many owners find it a little too calm, and it is for them that the Rog exhaust is designed: it gives the car a sonic presence without changing its family vocation.
Bear in mind, too, that the Q3 Sportback, with its lower roof, concentrates the sound more towards the rear. Sportback owners therefore often opt for the resonator, whereas those of the conventional Q3, with its squarer boot, hesitate more between the two characters.
What a remap adds, or not
A 150 hp TFSI responds well to a remap, but the Rog product page promises no figure: the result always depends on the car's condition and the tuner chosen. Above all, remember that the cat-back works alone, with no electronic modification, and that any remap is decided later.
The downpipe, if you choose it, prepares this work by freeing up the flow. It is only really justified when accompanied by an adjustment of the control unit, and nothing obliges you to take that step to enjoy the new sound.
Stainless steel or titanium
304 stainless steel gives a full, round sound. It ages well and withstands salted winters, hence its popularity with owners who use their Q3 all year round. Titanium lightens the exhaust by about 40% for the same design and brings a brighter note.
Three shades are offered: brushed, gold or purple. Brushed suits a neutral body colour, gold lifts a dark paint, purple makes a more assertive statement.
The downpipe, as an option
The product page optionally offers the Q3's downpipe, the pipe that extends the turbo and contains the catalytic converter. The 200-cell keeps emissions control; the 100-cell depends on the vehicle and the rules of the country; the catalyst-free version gives the freest sound.
Fitted alone, it mainly adds voice. To draw power from it, you need a remap entrusted to a tuner. The "No downpipe" position leaves the standard downpipe in place.
The model years covered
Our product page is aimed at the Q3 F3 TFSI of 150 hp, a four-cylinder sold from 2018. If your car carries another engine or an uncertain year, send us the VIN before ordering: we check compatibility and confirm manufacturing, or not, with no commitment. The RS Q3 F3, which has a different engine, has its own product page.
Configure your exhaust.
How the exhaust is put together
On the Q3, the Rog exhaust starts at the joint of the downpipe, under the floor, then runs along the cabin to the silencers, the valves and the rear outlets. The TFSI's downpipe, just behind the turbo, with its catalytic converter, is offered as an option on the product page.
Each choice explained in detail, from sound to material: How to configure your exhaust.
Your exhaust for the Q3
On the product page, you choose stainless steel or titanium, the titanium shade, the straight pipe or the resonator, and if you wish the downpipe in 200-cell, 100-cell or catalyst-free form. The valves are fitted with their Rog remote.
The price of each configuration is shown on the product page, in your currency.
Your choices carry over to the product page: only the finishes, your VIN and the cart remain.
Three recommended configurations.
-
Q3 for every day
- Stainless steel
- No downpipe
- Resonator
- Rog remote
For a Q3 that handles the school run and the office: standard downpipe, the TFSI's note rounded off by the resonator and valves closed again in traffic.
View this configuration -
Sportback for the road
- Brushed titanium
- 200-cell downpipe
- Resonator
- Rog remote
For a Q3 Sportback heading off for the weekend: lightened titanium, a 200-cell downpipe that keeps emissions control and a softer voice on main roads.
View this configuration -
Q3 with a raw temperament
- Gold titanium
- 100-cell downpipe
- Straight pipe
- Rog remote
For a Q3 you want to hear: straight pipe for the TFSI's edge, a more open 100-cell downpipe and gold titanium.
View this configuration
From order to fitting.
VIN, manufacture, delivery, fitting and warranty, step by step
Questions.
Which Q3 F3 does this product page cover?
The second-generation Q3 in its 150 hp TFSI version, sold since 2018. For another engine, send the VIN and we check what exists.
Does the Sportback have the same exhaust as the conventional Q3?
Yes. Both body styles share the engine and the layout under the floor: a single Rog product page covers them, and the VIN confirms the version before manufacturing.
My Q3 is an RS Q3: does this exhaust fit?
No. The RS Q3 F3 uses a different engine and has its own product page and its own guide. This page targets the 150 hp Q3 TFSI.
Does the S tronic gearbox change anything for the exhaust?
No. Manual or S tronic gearbox, the layout stays the same; the VIN, sent when you order, fixes the manufacturing.
Straight pipe or resonator on a Q3 TFSI?
The straight pipe keeps the raw edge of the four-cylinder, whereas the resonator rounds off the note for long motorway journeys. The price does not change.
Do you need to remap the Q3 to benefit from the cat-back?
No. The cat-back changes the sound and the weight without touching the control unit. The remap only serves to convert the downpipe into horsepower, and is entrusted to a tuner.

Audi Q3 / Q3 Sportback F3 TFSI Klapeli Egzoz Sistemi (2018+)
Başlangıç fiyatı 2 290 € · 3-year warranty
Configure my exhaustA question about your Q3 or your Sportback?
Put it to the Rog Advisor or write to us: we reply in writing, within 24 hours.
Further reading.
Sonraki okumalar
- Mercedes-AMG E55 W211 / S211 için hangi egzoz seçilmeli? Mercedes-Benz E 55 AMG W211 veya S211 station wagon: kompresörlü V8'e sahip bu E-Serisi için VIN numaranıza göre...
- Mercedes-AMG CLS53 C257 exhaust: which one to choose? A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...
- Which exhaust to choose for the Toyota GR Supra A90 3.0 L6? The GR Supra A90 revived a legendary line by pairing a short rear-wheel-drive chassis with the B58 3.0-litre...