Guides BMW 5 Series E60 / E61

Which exhaust to choose for the BMW M5 E60 V10?

By 10 dk okuma

Which exhaust to choose for the BMW M5 E60 V10?

For a BMW M5 E60 with the V10 engine, the right valved exhaust is a cat-back that frees up the S85's climb through the revs while letting the sedan pull away in silence when you decide. The Rog exhaust, built to your VIN in 304 stainless steel or titanium, connects behind the factory catalytic converters and arrives with its valves and its remote, since the M5 E60 has none as standard. This guide tells the story of the V10, what smothers its factory voice, and three ways to configure the exhaust for your M5.

Your valved exhaust for BMW M5 E60 S85 V10 is configured from your VIN, and the BMW 5 Series E60 / E61 Valved Exhaust page brings together every system we make for this generation. Driving a BMW 525i / 530i E60 (2005-2009)? See: BMW 525i E60 valved exhaust.

Brushed titanium valved exhaust for BMW M5 E60 5.0L S85 (2005-2010), pure sound without resonator, Rog gloss black tips - RogMotorsportBMW M5 E60 S85 V10 5.0L Klapeli Egzoz Sistemi (2005-2010)Başlangıç fiyatı 2 360 € · free delivery · 20 working days View
Rog valved exhaust system for BMW M5 E60

Your Rog exhaust: BMW M5 E60

Configure my exhaust

The short answer.

Vehicle
M5 sedan E60 with S85 V10, from 2005 to 2010
Engine
S85, 5.0-litre naturally aspirated V10
Exhaust
Valved cat-back, from the factory catalytic converters to the four tips
Sound
Straight pipe or resonator, at no extra cost
Material
304 stainless steel or titanium, three possible shades
Valves
Rog valves fitted, with remote
Tips
Rog included, or carbon with the M logo as an option
Lead time and warranty
20 working days of manufacture, free delivery, 3-year warranty

Your vehicle.

All our exhausts for this generation, version by version, are brought together on one page: BMW 5 Series E60 / E61 Valved Exhaust.

Between an M5 E39 with a V8 and an M5 F10 with a twin-turbo V8, the E60 generation holds a place apart: it is the only M5 generation to entrust its engine to ten cylinders, without a single turbo. This engine dictates everything, including the way its exhaust is designed. Here is what you need to know before choosing your exhaust.

Body style
E60, four-door sedan
Years
2005 to 2010
Engine
S85: 5.0-litre naturally aspirated V10, one throttle body per cylinder
Factory output
507 hp at 7,750 rpm, 520 Nm; maximum engine speed 8,250 rpm
Gearbox
Seven-speed sequential SMG, eleven shift programmes
POWER button
Two engine maps, 400 hp or 507 hp
Tailpipes
Four, two on each side
Factory valves
None: the factory exhaust has none

The only ten-cylinder M5

BMW showed the E60-generation M5 as a concept at the Geneva show in 2004, before putting it on sale as a sedan from 2005. It succeeded the M5 E39 and its V8, and in 2011 it gave way to the M5 F10, which moved to a twin-turbo V8. In between, the E60 remains a unique case: no other M5 has had ten cylinders.

The six-cylinder 5 Series E60 models, 525i and 530i, have their own product page and their own guide. An estate version, the M5 Touring E61, was also produced, in small numbers. It does not appear on the product page, which describes the sedan: if you own an E61, send us its VIN, and we will look into compatibility before offering you anything.

The S85, a tamed racing engine

The S85 is a 5.0-litre V10, without forced induction, born in the years when BMW supplied its engines to a Formula 1 team. Each of its ten cylinders has its own throttle body, which gives it an instant response to the accelerator. Its peak power, 507 hp, arrives at 7,750 rpm, with 520 Nm of torque, then it keeps revving to 8,250 rpm, a rare engine speed for a sedan.

The same V10 powers the M6 E63 and E64, which has its own guide. On the M5, the Rog exhaust touches neither the engine nor the ECU: the S85 keeps its 507 hp. The higher values shown below assume a remap and parts that this product page does not sell; they are given as a benchmark.

Power

Factory507 hp
Stage 2564 hp

Torque

Factory520 Nm
Stage 2578 Nm

Stage 2: published figures with engine tuning and an ECU remap done by a tuner, beyond the exhaust alone.

SMG, POWER button and MDrive

The M5 E60 changes gear through a seven-speed sequential SMG gearbox, with steering-wheel paddles and eleven shift programmes, including an assisted standing start. The driver also sets the engine map: the POWER button switches the V10 from a 400 hp setting to the 507 hp one, and back. The MDrive button on the steering wheel recalls the driver's preferred settings, saved in advance, with one touch.

None of these settings acts on the exhaust, since the factory exhaust has no valve. With the Rog exhaust, the volume is managed separately, by remote: you can drive in 400 hp with the valves open, or in 507 hp with the valves closed, depending on the place and the time. Your M5 thus gains a third setting, independent of the other two: the map, the gearbox programme, and now the volume of the exhaust.

The V10's double voice

The S85 has two clearly distinct registers. At low revs, it growls, with a deep roundness reminiscent of a big V8. Then, as the needle climbs towards the top of the rev counter, the sound tightens and becomes high-pitched, almost that of a racing car: this is the moment M5 E60 owners wait for.

On the product page, two characters are chosen at no price difference. The straight pipe passes on this shift from one register to the other without a filter. The resonator gives it a rounder and slightly softer voice, useful on an M5 that also serves as a touring sedan.

A heavy, quiet factory exhaust

Behind the manifolds with catalytic converters, the M5 E60's factory exhaust runs through a central assembly, then through two large rear silencers, left and right. According to the BMW parts catalogue, each of these silencers weighs 15.6 kg. Their role is to erase the V10 in town and on the motorway, and they do it well: it is mainly the high register of the high revs that loses out.

Replacing this rear section with a valved exhaust takes weight off the rear of the car and gives the S85 back its second voice. With the valves closed, the gases stay in the silencer chambers, and the M5 recovers the sound level of a sedan.

At a steady speed on the motorway, valves closed, all the gases pass through the silencers of the Rog exhaust: the M5 keeps the calm expected of a large sedan, and you open again at the exit, when the road becomes interesting again.

No factory valve: the Rog remote

Unlike many more recent sports cars, the M5 E60 has no factory exhaust valve: the BMW parts catalogue provides none on the exhaust. There is therefore nothing to carry over from the car, no control, no wiring, no setting to keep: on this M5, the factory exhaust has no valve to keep.

The Rog exhaust arrives with its own valves, already fitted, and a two-button remote. Open, the valves stay open; closed, they stay closed, whatever the gearbox programme or the position of the POWER button. You decide the volume, setting off on a mountain-pass road as when crossing a village.

Four tips, two on each side

The M5 E60 is recognised from behind by its four tips, grouped in pairs either side of the bumper. The Rog exhaust keeps this arrangement, and the product page lets you choose the finish: Rog tips in chrome, gloss black or blued titanium, included; carbon tips with the M logo in forged carbon, black carbon or carbon and titanium, as an option; or the exhaust without tips.

The material changes the weight and the timbre. 304 stainless steel gives the V10 a full sound and withstands winter; titanium, lighter, makes the climb through the revs more crystalline and is chosen brushed, gold or purple, at the same price.

For the same design, a titanium exhaust weighs about 40% less than the same exhaust in stainless steel. On a sedan of this size, the gain is felt mostly at the rear, where the factory silencers concentrated their mass.

A cat-back, nothing else

The M5 E60 product page covers the rear part of the exhaust, from the catalytic converters to the four tips. The manifolds, the catalytic converters and the engine remain the factory ones: the exhaust acts on sound and weight, not on power.

Rog builds the exhaust to the VIN of your M5, which confirms the version before manufacture. Your garage then fits it, with no welding or cutting: a precaution that matters on a car that many owners keep with care.

Configure your exhaust.

How the exhaust is put together

On the M5 E60, the Rog cat-back connects behind the factory catalytic converters and leads the gases to the four tips, with its pipes, silencers and valves. For this V10, the product page stops there: manifolds, catalytic converters and engine stay as BMW fitted them.

Each choice explained in detail, from sound to material: How to configure your exhaust.

Your exhaust for the M5 E60

On the product page, you choose 304 stainless steel or brushed, gold or purple titanium, then the straight pipe or the resonator, at the same price. The exhaust arrives with the Rog valves and their remote, and you dress the four outlets with Rog tips or carbon tips with the M logo.

The price of each configuration is shown on the product page, in your currency.

Your exhaust2 360 €
Continue with this configuration

Your choices carry over to the product page: only the finishes, your VIN and the cart remain.

Three recommended configurations.

  • Touring sedan

    • Stainless steel
    • Resonator
    • Rog remote
    • Rog chrome tips

    For an M5 E60 that eats up the miles: the V10 makes itself heard when you open, with a rounded voice, and knows how to stay quiet on the motorway.

    View this configuration
  • The V10 at full voice

    • Brushed titanium
    • Straight pipe
    • Rog remote
    • Carbon tips with the M logo

    To enjoy the S85's high register up to 8,250 rpm: the straight pipe, and the titanium that lightens the rear.

    View this configuration
  • Collector's M5

    • Gold titanium
    • Resonator
    • Rog remote
    • Rog gloss black tips

    For an E60 kept with care and brought out on fine days: a gold titanium exhaust that is seen, and fitting with no welding or cutting.

    View this configuration

From order to fitting.

VIN, manufacture, delivery, fitting and warranty, step by step

Questions.

Can my M5 Touring E61 receive this exhaust?

The product page describes the E60 sedan. For an M5 Touring E61, send us the VIN: we check what is possible before starting any manufacture.

Does the M5 E60 have factory valves to keep?

No. The factory exhaust of the M5 E60 has no exhaust valve. The Rog exhaust therefore arrives with its valves fitted and a two-button remote.

Do the POWER button or the SMG gearbox control the Rog valves?

No. The POWER button changes the V10's map, from 400 to 507 hp, and the SMG manages the gears; the Rog valves, for their part, obey only the remote, in the position you have chosen.

How does it sound compared with the factory M5 E60 exhaust?

On our scale of 0 to 10, the factory exhaust sits at 3, and the Rog exhaust reaches 7 with the valves open. With the valves closed, the M5 returns to a sound close to stock, useful in town or for an early morning start.

Straight pipe or resonator for the S85 V10?

The straight pipe lets you hear the shift from low to high register in the revs without a filter; the resonator gives the V10 a rounder and slightly softer voice. Both are the same price.

Stainless steel or titanium for an M5 E60 you keep for a long time?

304 stainless steel gives the V10 a full timbre and withstands salt and winter; titanium is lighter and makes the V10 more crystalline at high revs. Both last over time; the titanium is chosen brushed, gold or purple.

BMW M5 E60 S85 V10 5.0L Klapeli Egzoz Sistemi (2005-2010)

Başlangıç fiyatı 2 360 € · 3-year warranty

Configure my exhaust

A question about your M5 V10?

Put it to the Rog Advisor or write to us: we reply in writing, within 24 hours.

Further reading.