Guides Mercedes CLE C236 / A236

Which exhaust to choose for the Mercedes-Benz CLE300 C236 / A236?

By 10 dk okuma

Which exhaust to choose for the Mercedes-Benz CLE300 C236 / A236?

For a Mercedes CLE 300, coupé C236 or cabriolet A236, the right exhaust finally gives the M254 four-cylinder some relief, without taking away the car's easy grand-touring manner. The Rog exhaust is a 304 stainless steel or titanium cat-back with valves operated by remote, made to your VIN and identical for both body styles. This guide presents the CLE 300 and its engine, then the configurations we recommend.

Your valved exhaust for Mercedes-Benz CLE300 C236 / A236 is configured from your VIN, and the Mercedes CLE C236 / A236 Valved Exhaust page brings together every system we make for this generation. Driving a Mercedes-AMG CLE 53 C236? See: Mercedes-AMG CLE 53 C236 valved exhaust.

Brushed titanium valved exhaust for Mercedes-Benz CLE300 C236 / A236 2.0 turbo M254 (2023+), pure sound without resonator - RogMotorsportMercedes-Benz CLE300 C236 / A236 2.0 turbo Klapeli Egzoz Sistemi (2023+)Başlangıç fiyatı 2 890 € · free delivery · 20 working days View
Rog valved exhaust system for Mercedes-Benz CLE300 C236 / A236

Your Rog exhaust for the Mercedes-Benz CLE300 C236 / A236

Configure my exhaust

The short answer.

Vehicles
Mercedes CLE 300 coupé C236 and cabriolet A236: one exhaust for both
Engine
M254: 2.0 litres, four cylinders, turbo, 48-volt starter-generator
Exhaust
Valved cat-back, from the downpipe connection to the outlets
Sound
Straight pipe for the M254's grain, or resonator
Material
304 stainless steel, or brushed, gold or purple titanium
Downpipe
200-cell or 100-cell downpipe, or catalyst-free, as an option
Valves
Fitted, with the Rog remote
Lead time and warranty
20 working days of manufacturing, free delivery, 3-year warranty

Your vehicle.

All our exhausts for this generation, version by version, are brought together on one page: Mercedes CLE C236 / A236 Valved Exhaust.

The CLE is the coupé and cabriolet that Mercedes has offered since 2023 in place of the two families of the C-Class and the E-Class. The CLE 300 is its four-cylinder version, the most common on our roads. Here is what you need to know before choosing an exhaust for it.

Model
Mercedes CLE 300, coupé C236 and cabriolet A236
Years
Coupé on sale from 2023, cabriolet following; the VIN confirms the model year
Engine
M254: 2.0-litre inline four-cylinder, turbocharged
Factory output
258 hp and 400 Nm
Mild hybrid
48-volt starter-generator, which supplements the engine when pulling away
Gearbox
Nine-speed automatic
Neighbouring version
CLE 53, six cylinders, with its own product page and its own guide
Body styles
Two-door coupé and cabriolet with a fabric roof

One coupé taking the place of two

For years, Mercedes sold a C-Class coupé and an E-Class coupé, each with its own cabriolet. The CLE brings these two roles together in a single model, introduced in 2023, with the technical base of the latest C-Class and a more generous size, close to that of the old E-Class coupé.

The result is a grand tourer with very clean lines: long frameless doors, a taut roofline, slim lights. The A236 cabriolet keeps this silhouette under a fabric roof that folds away in a few seconds.

The M254, a new-generation four-cylinder

Under the bonnet of the CLE 300, the M254 is a 2.0-litre turbocharged direct-injection engine, an evolution of the four-cylinder that Mercedes uses across its whole recent range. It is paired with a 48-volt starter-generator, which replaces the conventional starter motor and adds a slight boost in power and torque when pulling away.

The Rog product page lists 258 hp and 400 Nm for this version. For an engine of this size, the torque is generous and arrives early, which explains the car's supple character: you travel fast without ever having to push the gears, and the nine-speed gearbox smooths out the jolts.

A transmission designed for comfort

The CLE 300's nine-speed automatic favours smoothness. In normal driving it upshifts quickly to keep the revs low, then downshifts without delay when you ask for pick-up. It is an ideal partner for a turbo engine, but it is also one more reason why the M254 is heard so little: it rarely revs high.

This mechanical restraint goes with a very well insulated cabin, where wind and road noise are carefully filtered out. The car is therefore quiet by design, and the factory exhaust does not try to contradict that approach.

The sound of a turbo four-cylinder

A turbocharged inline four-cylinder has a rather dry timbre, with a metallic grain under acceleration and higher harmonics than a six-cylinder. On the CLE 300, this grain is largely muffled by the standard silencers and by the body's sound insulation.

On board, you mostly perceive a steady rush of air, and from outside a murmur. For a car that wins people over with its looks, the gap between the design and the voice is noticeable: it is precisely this gap that the Rog exhaust fills, while respecting the calm of everyday driving when you want it.

What the factory line lets through

Noise regulations for new cars oblige manufacturers to limit exterior noise, and the CLE 300 respects this restraint diligently. The drive modes change the response of the throttle and the gearbox, but the engine's voice stays well-behaved in each of them.

The Rog product page presents the CLE 300 as a car whose engine almost never makes itself known. It is not deaf for all that: it simply has plenty of margin before reaching what a turbo four-cylinder can offer when it is allowed to speak.

What the Rog exhaust changes

With the valves open, the CLE 300 gains a fuller timbre, a frank presence from the moment it starts and crackles on lift-off. The voice remains that of a four-cylinder, but it finds a body that it does not have as standard.

With the valves closed, the car returns to a level close to the factory one, suited to early starts, residential streets and long stages. The same coupé thus changes character with mood and time of day.

The Rog remote

On this product page, the exhaust is delivered with its valves fitted and a Rog remote, whose small control unit sits in the boot. Open, the valves stay open; closed, they stay closed, whatever drive mode is selected.

The volume therefore no longer depends on how you drive. You can choose Comfort mode with the valves open to enjoy the engine without hustling the car, or Sport mode with the valves closed for a discreet exit.

Coupé C236 or cabriolet A236

The coupé and the cabriolet receive the same exhaust: same engine, same routing under the floor, same fixing method. The cabriolet, a little heavier because of its body reinforcements, gains a particular pleasure here: with the roof down, nothing filters the engine's voice any more.

Your VIN lets us confirm the exact version and model year before manufacture, which avoids any unpleasant surprise on a generation that is still recent.

Stainless steel, titanium and sound character

304 stainless steel gives a round sound and withstands winters and salt. Titanium weighs about 40% less for the same design and makes the note clearer in the revs; it comes brushed, gold or purple, depending on the look you want to give the outlets.

The character is chosen at no extra cost: the straight pipe lets the M254 express itself unfiltered, while the resonator gives it a rounder and slightly softer voice, which suits a cabriolet driven with the roof down.

The optional downpipe

The product page also offers, as an option, the M254's downpipe, the part that follows the turbo and carries the catalytic converter. With 200 cells, the emissions control is kept; the 100-cell version depends on the car and the rules of the country; the catalyst-free version gives the freest sound.

Without an ECU remap, this part acts on the sound and a little on the weight, not on the power. Rog makes the exhaust to your VIN, and your garage fits it without welding or cutting, following the clamp-and-gasket installation.

The neighbours in the range

The six-cylinder CLE 53 has its own exhaust, because its engine and routing are different. The other engines in the CLE range do not appear on this product page: if you are unsure about your version, the VIN sent with the order settles the question.

Our product page explicitly names the CLE 300: it does not extend compatibility to other versions without a check.

Configure your exhaust.

How the exhaust is put together

On the CLE 300, the Rog exhaust starts at the downpipe connection, under the floor, and reaches the outlets through the pipes, silencers and valves. The M254's downpipe, placed right behind the turbo with its catalytic converter, can be ordered as an option on the product page.

Each choice explained in detail, from sound to material: How to configure your exhaust.

Your exhaust for the CLE 300

On the product page, you choose 304 stainless steel or brushed, gold or purple titanium, then the straight pipe or the resonator, and if you wish the downpipe, from 200 cells to catalyst-free. The valves arrive fitted, with the Rog remote.

The price of each configuration is shown on the product page, in your currency.

Your exhaust2 890 €
Continue with this configuration

Your choices carry over to the product page: only the finishes, your VIN and the cart remain.

Three recommended configurations.

  • Everyday coupé

    • Stainless steel
    • No downpipe
    • Resonator
    • Rog remote

    For a CLE 300 used every morning: the downpipe stays standard, the resonator rounds off the M254 and the valves close with a flick in town.

    View this configuration
  • Summer convertible

    • Titanium
    • No downpipe
    • Straight pipe
    • Rog remote

    For an A236 cabriolet driven with the roof down: titanium brightens the note, the straight pipe lets you hear the engine in the open air.

    View this configuration
  • A more expressive coupé

    • Titanium
    • 200-cell downpipe
    • Straight pipe
    • Rog remote

    For a C236 coupé that wants more presence while keeping its catalytic converters: 200-cell downpipe, titanium and straight pipe.

    View this configuration

From order to fitting.

VIN, manufacture, delivery, fitting and warranty, step by step

Questions.

Do the coupé and the cabriolet get the same exhaust?

Yes. The CLE 300 C236 and the A236 share the engine and the layout of the Rog exhaust. Your VIN confirms the version and model year before manufacture.

Can my CLE 200 or my CLE 450 take this exhaust?

This line is designed for the CLE 300. For another version, send us the VIN with your order: compatibility is checked before manufacture begins.

Does the CLE 53 have the same exhaust?

No. Its six-cylinder requires a different routing, and it has its own product page, with its own dedicated guide.

What sound can I expect compared with the standard CLE 300?

On our scale of 0 to 10, the factory exhaust sits at around 3. With the valves open, the Rog exhaust alone rises to 7; the optional downpipe goes further. With the valves closed, the coupé stays close to its original calm.

Do the drive modes affect the Rog valves?

No. With the Rog remote, the valves keep the chosen position, open or closed, whatever mode is selected.

Straight pipe or resonator on the M254?

The straight pipe brings out the four-cylinder's grain and its crackles. The resonator, at the same price, gives a rounder and slightly softer voice, often preferred on a cabriolet.

Mercedes-Benz CLE300 C236 / A236 2.0 turbo Klapeli Egzoz Sistemi (2023+)

Başlangıç fiyatı 2 890 € · 3-year warranty

Configure my exhaust

A question about your CLE 300 coupé or cabriolet?

Put it to the Rog Advisor or write to us: we reply in writing, within 24 hours.

Further reading.