The Rog Journal

Milltek BMW M3 G80 vs a custom exhaust system: the comparison

By 5 dk okuma

Milltek BMW M3 G80 vs a custom exhaust system: the comparison

The complete model guide: M3 G80 exhaust.

The short answer. For the BMW M3 G80, Milltek offers a stainless steel GPF-back (everything after the factory particulate filter), in a resonated or non-resonated version: the character of the sound is set once, when you buy it.

Aracınız.

Choose your model: we show you its exhaust, its options and the lead time.

We check compatibility with your VIN before manufacturing.

Contents 7
  1. Milltek M3 G80 prices in France.
  2. Resonated or non-resonated: drone in everyday use.
  3. Equal Length and Z-pipe: timbre, not just volume.
  4. Milltek vs Rog on the M3 G80: the comparison.
  5. Configuring your exhaust system for the M3 G80.
  6. Frequently asked questions.
  7. Sources.

Every version and option is gathered on our BMW M4 G82 / M3 G80 exhaust system page.

A Rog exhaust system approaches the problem differently. It is made to order for your M3 from its VIN, and you set its sound twice: at configuration, by choosing the timbre of the S58 (Standard, Equal Length or Equal Length + Z-pipe), then on every drive, with the valves open or closed.

Milltek M3 G80 prices in France.

The price of a Milltek depends on the dealer, the version and the tips. At Rog, the M3 / M4 G80 / G81 / G82 / G83 system is available from €2,890, remote included, with free delivery.

Lead time: “by email” on the page. Installation and delivery come on top, depending on the workshop you choose.

Resonated or non-resonated: drone in everyday use.

This is the real everyday question with Milltek. A centre silencer (resonator) absorbs some of the frequencies that make the cabin vibrate at a steady speed. Removing it frees up the sound, but increases the risk of drone on the motorway, at certain cruising revs.

A valved exhaust system answers this dilemma differently: with the valves closed, the gases pass through the silencer and the car stays close to its original sound; with the valves open, the sound is set free. You choose according to the moment (see the drone phenomenon).

Equal Length and Z-pipe: timbre, not just volume.

Resonated or non-resonated, the Milltek choice is about intensity. The character of the S58, however, is decided further upstream. Each turbo takes the gases from three cylinders and two pipes run towards the rear; from the factory, they are not the same length, the pulses meet out of step and the sound turns raspy. With Rog, you choose what happens at that point:

Design Principle Your M3's voice
Standard factory routing, no resonator the raspy texture of the twin-turbo, full-bodied and direct
Equal Length two pipes of the same length a higher, smoother note: the true timbre of a straight-six
Equal Length + Z-pipe equal lengths and flows crossed in a Z a higher-pitched, rounder, exotic sound, GT-R style

On the M3 G80, we recommend Equal Length: it is the design that changes the car's identity the most. The material then refines it: 304 stainless steel for a deep tone, titanium for a higher, more metallic timbre. For the Z-pipe in detail, see BMW Z-pipe: what this pipe changes.

Milltek vs Rog on the M3 G80: the comparison.

Milltek (M3 G80/G81 GPF-back) Rog (custom M3 / M4 G80 / G81 / G82 / G83 exhaust system)
Manufacturing catalogue part number made to order from your VIN
Sound set at purchase: resonated or non-resonated adjustable on the move: valves closed or open
Design one design Standard, Equal Length or Equal Length + Z-pipe
Material 304L stainless steel 304 stainless steel or titanium
Finishes polished, black, titanium, blue titanium or carbon tips brushed titanium, gold or purple
Front section not included optional 200-cell or 100-cell downpipe, or decat
Body styles G80 and G81 on the page consulted G80, G81, G82 and G83, base and Competition
Warranty Milltek terms (reseller document) 3 years, parts and workmanship
Delivery depends on the reseller free, 20 working days

What really matters:

  1. With Milltek you choose the sound once; with Rog, on every drive. That is the fundamental difference between a fixed GPF-back and a valved exhaust system.
  2. The timbre of the S58. With Milltek, the version sets the intensity; with Rog, the Equal Length design also changes the engine's character.
  3. The exhaust system is built around your choices: material, front section and valve control are chosen for your car.

Configuring your exhaust system for the M3 G80.

The Rog exhaust system is made after you order, for your M3, and installs without welding or cutting in about two hours. On the product page, you choose:

  • the design: Standard, Equal Length or Equal Length + Z-pipe;
  • the material: 304 stainless steel, or titanium, around 40% lighter for the same design, in a brushed, gold or purple finish;
  • the front section: on this turbocharged engine, the downpipe, kept original or taken in a 200-cell version for the road; the extra horsepower comes with an ECU remap;
  • the valves: factory control through the drive modes, or the Rog remote.

Undecided? Tell us the intensity you want on a scale of 1 to 10 and we will guide you. Prices and options are listed on the BMW M3 / M4 G80 / G81 / G82 / G83 exhaust product page; the designs are compared on the BMW Equal Length and Z-pipe page; advice in the M3 and M4 G8x guide. Also weighing up other brands? See Grail M3 G80 and Armytrix on the M4 G82.

See also: Akrapovič BMW M3 / M4 · Milltek.

Frequently asked questions.

Does the Milltek M3 G80 exhaust fit the M3 Touring G81?
Yes, according to the page consulted, which lists the G80 and the G81. The Rog exhaust system also covers the M4 G82 and the M4 Convertible G83 with the same part number.

What does Equal Length bring compared with a non-resonated Milltek?
The non-resonated version gives the original sound more presence. Equal Length changes the sound itself: the two pipes of equal length synchronise the S58's pulses, and the note becomes higher and smoother.

Can you switch from a discreet sound to a free-flowing one with a Milltek?
Not on the move: the character depends on the version you bought. That is exactly what a valved exhaust system allows.

Sources.

All accessed on 30/09/2026.

  1. Rog, BMW M3 / M4 G80 / G81 / G82 / G83 product page (price, designs and options): https://rogmotorsport.com/en/products/exhaust-bmw-m3-g80-m4-g82-3-0t
  2. Rog, BMW Equal Length and Z-pipe page (the three designs): https://rogmotorsport.com/en/pages/equal-length-z-pipe-exhaust-bmw-m