Guides

BMW 435i / 440i F32 / F33 / F36 exhaust: which one to choose?

By 10 min read

BMW 435i / 440i F32 / F33 / F36 exhaust: which one to choose?

The right 435i F32 exhaust, like the right 440i exhaust, in coupé, F33 convertible or F36 Gran Coupé form, lets the straight-six out of its confinement under the bonnet, from the N55 to the B58, while keeping the car's grand-touring ease. The Rog exhaust is a 304 stainless steel or titanium valved cat-back, made to your VIN. This guide presents the two engines, then the recommended configurations.

Your valved exhaust for BMW 435i F32 / F33 / F36 is configured from your VIN, and the BMW 4 Series F32 / F33 / F36 Valved Exhaust page brings together every system we make for this generation. Driving a BMW 430i F32? See: BMW 430i F32 valved exhaust.

Rog valved exhaust system for BMW 435i F32 / F33 / F36 or 440i F32 / F33 / F36

Your Rog exhaust for BMW 435i F32 / F33 / F36 or 440i F32 / F33 / F36

Configure my exhaust
For
BMW 435i (N55) and 440i (B58), in coupé, convertible and Gran Coupé: one Rog product page for each
Engines
N55 then B58: inline six-cylinder, 3.0 l, a single turbo
Exhaust
Valved cat-back, from the downpipe to the outlets
Sound
Straight pipe for the raw six-cylinder, or resonator
Material
304 stainless steel, or brushed, gold or purple titanium
Downpipe
200-cell or 100-cell downpipe, or catalyst-free, as an option
Tips
Chrome, gloss black, blued titanium, carbon with the M logo, or no tips
Lead time and warranty
20 working days of manufacturing, free delivery, 3-year warranty

Your vehicle.

All our exhausts for this generation, version by version, are brought together on one page: BMW 4 Series F32 / F33 / F36 Valved Exhaust.

The first-generation 4 Series succeeded the 3 Series coupés in 2013 and came in three body styles. At the top of the petrol range, two models follow one another: the 435i F32, then the 440i. Here is what you need to know about them before choosing an exhaust.

Models
BMW 435i, then 440i, on the first-generation 4 Series
Body styles
Three: coupé (F32), convertible (F33), four-door (F36)
Years
Our 435i product page: 2014 to 2016; our 440i product page: 2016 to 2020
435i
N55, 3.0 l turbo inline six-cylinder: 306 hp, 400 Nm
440i
B58, 3.0 l turbo inline six-cylinder: 326 hp, 450 Nm
Drivetrain
Rear-wheel drive, or xDrive all-wheel drive depending on version
Gearboxes
Six-speed manual or eight-speed automatic depending on version
Rog product pages
One per engine, with the same exhaust for the three body styles

BMW 435i F32 / F33 / F36 3.0T, 306 hp as standard

Power

Factory306 hp
Stage 2368 hp

Torque

Factory400 Nm
Stage 2557 Nm

BMW 440i F32 / F33 / F36 3.0T, 326 hp as standard

Power

Factory326 hp
Stage 2440 hp

Torque

Factory450 Nm
Stage 2620 Nm

Stage 2: published figures with the downpipe and an ECU remap carried out by a tuner.

A 4 Series in three body styles

BMW gave its coupés a distinct identity in 2013: the 3 Series stayed the saloon, and the 4 Series took over the role of coupé and convertible. The coupé (code F32) is the most restrained of the three, the convertible (F33) houses a retractable hard top, and the Gran Coupé (F36) adds rear doors and a tailgate for the silhouette of a four-door coupé.

The three body styles share the same platform and the same mechanics. That is why the Rog exhaust is identical for each of them, and why the VIN is enough to confirm the precise version before manufacture.

The 435i F32's N55

Under the bonnet of the 435i works the N55, an inline six-cylinder with direct injection, whose supercharging is handled by a single twin-scroll turbo. This arrangement separates the gases into two distinct streams up to the turbine and improves response at low revs. On the figures, the engine delivers 306 hp for 400 Nm.

The N55 is an engine appreciated for its suppleness: it pulls hard from mid-range revs, with no flat spot, and can be taken to the red zone with fine regularity. Its only reproach: a very reserved factory voice.

The 440i's B58

With the 440i, BMW moves to the B58. The displacement and the principle remain those of the N55, but the engine is newer, stiffer and more efficient. The product page values are 326 hp and 450 Nm: the broader torque is felt from low revs.

The B58 is also an engine that responds very well to tuning, and that now powers many of the brand's models. On the 4 Series, it confirms the 440i's vocation: a quick, comfortable coupé that you drive as much for pleasure as for travelling.

The character of the inline six-cylinder

An inline six-cylinder is naturally balanced: the forces are spread without vibration, and the sound it produces is continuous and silky. The N55 and the B58 sing with a round voice, with a slightly more biting grain at full load on the B58.

This timbre is one of the reasons enthusiasts appreciate this architecture. It has neither the roughness of a four-cylinder nor the brilliance of a V8: it is a steady note, which rises with the revs and lends itself well to a well-tuned exhaust.

What the factory line lets through

The 4 Series factory exhaust is designed for discretion. On board you perceive a moderate mechanical rush, and from outside a murmur barely more present than a well-behaved saloon. The coupé promises more than it lets you hear.

This gap is the reason for the Rog exhaust's existence. It keeps the engine's suppleness and does not touch the ECU: it changes only what the silencers hold back.

Against the 420i, the 430i and the M4

Below, the four-cylinder 420i and 430i have their own exhausts and their own guide. Above, the M4 belongs to another engine family and another product page. The 435i and the 440i therefore occupy the middle place: enough power to be quick, and a six-cylinder that many drivers consider the finest engine in the range.

In this position, they attract an audience that wants a complete coupé, usable every day, whose voice matches the elegance of its line.

What the Rog exhaust changes

With the valves open, the 4 Series takes on a full voice, with a round bass at idle, a silky climb through the revs and crackles on lift-off. The six-cylinder makes itself heard from end to end.

With the valves closed, the car regains the reserve of a grand tourer, suited to town, motorways and early mornings. The same coupé thus offers two characters, depending on the position of the valves.

The F33 convertible

The F33 convertible makes the choice of sound even more personal. With the roof folded, the six-cylinder's voice reaches the driver's ears directly, unfiltered by the cabin. Open valves suit country roads; closed, they let you cross a village without being noticed.

On the F36 Gran Coupé, the taut roofline and the large tailgate create a cabin volume that slightly amplifies the low harmonics: the resonator often finds its audience there.

Valves: Rog remote or factory mounts

With the Rog remote, the valves are fitted to the exhaust and operated by a small control unit in the boot: open, they stay open; closed, they stay closed, whatever the drive mode.

With Factory mode, the exhaust arrives with the mounts for the factory components, which your garage refits, and the factory control keeps the lead. The VIN lets us check which one suits your car.

Stainless steel, titanium, straight pipe or resonator

304 stainless steel gives the six-cylinder a full, round sound and withstands winters. Titanium, about 40% lighter for the same design, brings a clearer note at high revs; it comes in brushed, gold and purple.

The character is chosen at the same price: the straight pipe lets the N55 or the B58 speak unfiltered, while the resonator gives it a rounder and slightly softer voice, often preferred on the convertible and the Gran Coupé.

The tips

The product page offers Rog tips in chrome, gloss black or blued titanium, carbon tips with the M logo in three finishes, or the no-tips option to keep the original outlets. This choice changes the car's rear look, not its sound.

The carbon tips go well with sport-trim 4 Series, while the chrome tips suit the more classic versions.

The optional downpipe

Each product page optionally offers the six-cylinder's downpipe, the part that follows the turbo and carries the catalytic converter. With 200 cells, the emissions control is kept; the 100-cell version depends on the car and the rules of the country; the catalyst-free version gives the freest sound.

Without a remap, this part acts on the sound and a little on the weight, not on the power. Rog makes the line to your VIN, and your garage fits it without welding or cutting.

Configure your exhaust.

How the exhaust is put together

On the 435i as on the 440i, the Rog exhaust starts at the downpipe connection, under the floor, and reaches the outlets through the pipes, silencers and valves. The six-cylinder's downpipe, placed right after the turbo with its catalytic converter, is offered as an option on each product page.

Each choice explained in detail, from sound to material: How to configure your exhaust.

Your exhaust for the 435i or the 440i

On the product page for your engine, you choose 304 stainless steel or titanium, then the straight pipe or the resonator, the tips, and if you wish the downpipe. The valves are operated by the Rog remote or by the factory control.

The price of each configuration is shown on the product page, in your currency.

Three recommended configurations.

  • Everyday 435i

    • 435i N55
    • Stainless steel
    • No downpipe
    • Resonator
    • Rog remote

    For a 435i F32 used daily: standard downpipe, the N55's voice rounded by the resonator and valves that you close in town.

    View this configuration
  • Touring 440i

    • 440i B58
    • Brushed titanium
    • No downpipe
    • Straight pipe
    • Rog remote

    For a 440i that eats up the miles: lighter titanium, straight pipe for the B58's grain and valves closed on the motorway.

    View this configuration
  • More expressive F33 convertible

    • 435i N55
    • Gold titanium
    • 200-cell downpipe
    • Straight pipe
    • Rog remote

    For a convertible driven with the roof down: 200-cell downpipe that keeps the emissions control, gold titanium and a six-cylinder at full voice.

    View this configuration

From order to fitting.

VIN, manufacture, delivery, fitting and warranty, step by step

Questions.

435i or 440i: should I choose the same product page?

No. Each engine has its own product page: the N55 for the 435i, the B58 for the 440i. The VIN, sent with your order, confirms which one matches your car.

Do the coupé, the convertible and the Gran Coupé get the same exhaust?

Yes, on each engine: F32, F33 and F36 share the Rog exhaust's routing. Only the engine changes, and so the product page.

My 435i F32 dates from 2013: is it covered?

Our product page states 2014 to 2016. For a model year at the edge of this range, the VIN sent with the order settles it before manufacture begins.

Can my 430i or my 420i take this exhaust?

No: the four-cylinder engines have their own product page and their own guide. These exhausts target the inline six-cylinders.

What sound compared with the standard 4 Series?

On our scale of 0 to 10, the factory exhaust sits at around 3. With the valves open, the Rog exhaust alone rises to 7; the optional downpipe goes further. With the valves closed, the car stays close to its original calm.

Straight pipe or resonator for an inline six-cylinder?

The straight pipe brings forward the engine's timbre and its crackles. The resonator, at the same price, gives a rounder and slightly softer voice, often preferred on the convertible and the Gran Coupé.

A question about your 435i or your 440i?

Put it to the Rog Advisor or write to us: we reply in writing, within 24 hours.

Further reading.