Guides BMW Z4 G29

BMW Z4 G29 (20i / 30i): the complete exhaust system guide

The Rog team 11 min read

BMW Z4 G29 (20i / 30i): the complete exhaust system guide

The Z4 sDrive20i and 30i share the sharp chassis of the M40i, with the B48 four-cylinder engine. An agile, lightweight roadster, but with an almost non-existent factory voice: with the roof down, you hear the wind more than the engine. This is exactly the kind of car our exhaust system transforms the most. Here you will find everything that matters before configuring the exhaust for your BMW Z4 G29: catalytic converter, material, valves, tips and vehicle inspection.

Your valved exhaust for BMW Z4 G29 B48 is configured from your VIN, and the BMW Z4 G29 Valved Exhaust page brings together every system we make for this generation.

Brushed titanium valved exhaust for BMW Z4 G29 B48 2.0T (2019-2022), pure sound without resonator, Rog gloss black tips - RogMotorsportValved Exhaust System for BMW Z4 G29 B48 2.0T (2019-2022)From £2,125 · free delivery · 20 working days View
Rog valved exhaust system for BMW Z4 G29

Your Rog exhaust for BMW Z4 G29

Price shown on the product page, in your currency

Configure my exhaust

The short answer.

Vehicles
BMW Z4 G29 2.0T (2019-2022)
Engine
B48 · 197 to 258 hp · 320 to 400 Nm, depending on the version
Exhaust
Valved cat-back, built for your VIN
Material
304 stainless steel or titanium
Front section
Optional: catted downpipe with 200 or 100 cells, or decat
Valves
Rog remote, or factory control if your vehicle has it
Lead time
20 working days from order confirmation to delivery
Warranty
3 years, parts and workmanship

Closely related versions have their own guide: BMW Z4 M40i G29 3.0T, BMW Z4 E89 2.0T, BMW Z4 E89 2.5L / 3.0L.

The turbocharged 4-cylinder: more character than you might think

The turbocharged four-cylinder in your Z4 G29 (20i / 30i) is a modern, robust engine, but BMW calibrated it for efficiency and silence, not for emotion. The result: an anonymous, flat factory sound. What few drivers know is that a turbocharged 4-cylinder responds very well to a well-engineered exhaust: by removing the unnecessary silencers and optimising the routing, you get a full, sporty and rewarding tone, with crisp crackles on the overrun.

The Rog exhaust delivers exactly that, and the controllable valves do the rest: character when you want it, total discretion when you need it.

What makes up the exhaust on your BMW Z4 G29

An exhaust system is best understood in two parts. Here is what each one does, and what Rog replaces.

How the exhaust system is laid out From left to right: the engine, the front section, then the Rog cat-back with its valved silencer and tips.Front sectionRog cat-back: the complete exhaustB48
Valves closed: the silencer does its work and the sound stays discreet.Valves open: the direct path opens up and the engine finds its full voice.Schematic only; the actual routing depends on the vehicle.

The cat-back is the complete exhaust system

It is everything you can see under your BMW Z4 G29, from the outlet of the front section to the tips: pipes, silencer, valves. This is the part where most of our research and development goes: it is what shapes the sound, and it is enough on its own to transform the car.

The front section, where the catalytic converter sits

On your BMW Z4 G29, it is the downpipe, the pipe leading from the turbo. It contains the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing it is optional: it frees up the flow, and it is the ECU remap that turns that into horsepower.

Your BMW Z4 G29 in figures

An exhaust system is judged first by ear and on the scales. The extra horsepower comes from an ECU remap.

Power

Factory197 to 258 hp
Stage 2340 hp

Torque

Factory320 to 400 Nm
Stage 2510 Nm

Published factory and Stage 2 figures. Factory figures vary by version; Stage 2 figures published for the 258 hp version.

The Rog exhaust works with or without an ECU remap. To get the full potential out of your BMW Z4 G29, we advise taking it to an approved tuning centre afterwards.

To be completely transparent: on a turbocharged 4-cylinder, the exhaust alone mainly improves breathing and sound. The significant power gains come with Stage 2, the exhaust plus an ECU remap at an approved tuning centre, and the engine handles them with ease. It is the combination we recommend to anyone who also wants to transform performance.

Configuring your exhaust, step by step

4 choices, in the same order as the product page configurator.

  1. Step 1 of 4: Material: stainless steel or titanium

    Titanium costs more than stainless steel; the price of each version is shown on the product page, in your currency.

    304 stainless steel

    Weight
    Baseline
    Sound
    Full and rounded

    The safe bet: strong, corrosion-proof, with a full, rounded sound. The best value for money.

    Titanium

    Weight
    Around 40% lighter
    Sound
    Metallic, crystal-clear

    It makes the exhaust around 40% lighter for the same design. Its note is more metallic and clearer higher up the rev range, and its finish ranges from brushed to blued.

    No worries on durability: 304 stainless steel shrugs off winter road salt and titanium does not rust. Stainless steel or titanium: what really changes.

  2. Step 2 of 4: Front section: downpipe and catalytic converter

    Optional: the downpipe on your BMW Z4 G29, with its catalytic converter. Each option is placed on our sound scale of 0 to 10, valves open, with the factory exhaust at 3.

    Cat-back only

    Included

    7/10

    Factory emissions control

    The factory front section stays in place. It is already a complete transformation, and the choice of many of our customers.

    200-cell sports catalytic converter

    8/10

    Road use and inspection

    More flow, emissions control retained: the right option for road use.

    100-cell sports catalytic converter

    9/10

    Inspection: depends on local rules

    More open than the 200-cell: the sound hardens at high revs and emissions control is reduced.

    Decat

    10/10

    Track use

    Flow with no filter at all: the rawest sound and the sharpest response.

    Sound intensity, on a scale of 0 to 10

    1. 10/10Decat downpipe + Rog cat-back
    2. 9/10100-cell sports catalytic converter + Rog cat-back
    3. 8/10200-cell sports catalytic converter + Rog cat-back
    4. 7/10Rog cat-back only, factory catalytic converter retained
    5. 3/10Factory exhaust, for comparison

    Valves open. With the valves closed, every configuration becomes discreet again.

    What about the engine warning light? With a sports cat, it can come on with some engines: the sensor placed after the catalytic converter measures a different level of emissions control from the original. It is not a mechanical failure, but a warning light should never be masked or cleared without dealing with its cause: the right answer is a catalytic converter suited to the engine, with a map by a tuner who takes it into account. The decat version, for track use only, almost always triggers it. If this happens to you, write to us and we will point you in the right direction. Passing vehicle inspection with a sports exhaust.

  3. Step 3 of 4: Valves: Rog remote or factory control

    Two ways to control the valves on your BMW Z4 G29.

    Rog remote

    Rog remote for opening and closing the valves

    A discreet control unit in the boot and a two-button remote: you open and close whenever you like, independently of the drive modes. For fitting, we support you by email.

    Factory control

    • Only for vehicles fitted with factory valves
    • Controlled by the drive modes

    For vehicles fitted with factory valves: the exhaust connects to their control and the drive modes stay in charge, with no extra control unit.

    At 130 km/h, many sports exhausts drone. Here, with the valves closed, the exhaust flows through the silencer and stays composed when cruising; open, it makes itself heard when you choose. More about exhaust drone.

  4. Step 4 of 4: Tips: the visual signature

    Match the tips to the style of your BMW Z4 G29, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.

    • Chrome
    • Gloss black
    • Blued titanium
    • M Performance Carbon Black
    • M Performance Carbon Titanium
    • M Performance Carbon Forged
    Exhaust tips for BMW Z4 G29
Your exhaust£2,125
Continue with this configuration

Your choices carry over to the product page: only the finishes, your VIN and the cart remain.

The Rog sound signature on the 4-cylinder

Our optimised routing gives the 4-cylinder a full, sporty tone, far richer than the thin factory sound, with crisp crackles on the overrun with the valves open. The goal is not volume at any cost but a rewarding, controlled sound that becomes completely discreet again with the valves closed.

On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty.

Valves open and valves closed: the gas path through the Rog silencer
Valves open, valves closed: the path the gases take through the silencer.

From order to fitting

  1. Configuration

    You configure the exhaust and enter the VIN from box E of your registration document or from the base of the windscreen.

  2. Check

    Your VIN is checked before any manufacturing begins.

  3. Manufacturing

    The exhaust is produced to order, for your vehicle.

  4. Delivery

    Free, insured parcel, tracking number from dispatch.

  5. Fitting

    Around two hours in the workshop, with no welding or cutting.

20 working days from order confirmation to delivery

Warranty
3 years, parts and workmanship, from the date of purchase
Payment
Card, PayPal or bank transfer
Installation
At the garage of your choice

Is your BMW Z4 G29 still under the manufacturer's warranty? In Europe, the manufacturer cannot refuse cover simply because a part from another brand has been fitted: it is up to the manufacturer to prove that the fault comes from that part. Our article on the manufacturer's warranty.

Our recommendations for your BMW Z4 G29

  • Daily driving

    • Stainless
    • Cat-back only
    • Rog remote

    Your BMW Z4 G29 stays easy to live with, the factory emissions control is retained, and you open the valves whenever you decide.

    View this configuration
  • Fast road

    • Titanium
    • 200-cell downpipe
    • ECU remap

    The best of both worlds: character and breathing, with emissions control retained.

    View this configuration
  • Track

    • Titanium
    • Decat downpipe
    • Stage 2

    The most extreme configuration, for track use only.

    View this configuration

Every BMW Z4 G29 has its own story and its own use: if none of these profiles sounds like you, let's talk.

BMW Z4 G29: your questions

How much power does an exhaust add on the BMW Z4 G29?

As standard, the BMW Z4 G29 produces 197 to 258 hp and 320 to 400 Nm, depending on the version. The exhaust alone acts first on sound, breathing and weight; the extra horsepower comes from an ECU remap. With a Stage 2 build, the published figures for the 258 hp version reach 340 hp and 510 Nm.

Stainless steel or titanium: which material for the BMW Z4 G29?

The Rog exhaust comes in stainless steel and titanium, at the price shown on the product page in your currency. Stainless steel is the safe bet, with a full sound; titanium makes the exhaust around 40% lighter and gives a more metallic note higher up the rev range.

Do you need to replace the catalytic converter on the BMW Z4 G29?

It is not compulsory. The cat-back alone is enough to change the character of the BMW Z4 G29. Replacing the downpipe is how you go further, together with an ECU remap: 200 cells for the road, 100 cells or decat for more radical use.

Will a Rog exhaust pass vehicle inspection on the BMW Z4 G29?

The cat-back only and the 200-cell converter both retain emissions control: present the BMW Z4 G29 with the valves closed. With the 100-cell, acceptance at the emissions test depends on the car and local rules; the decat is intended for track use.

How is the Rog exhaust fitted on the BMW Z4 G29?

With clamps and gaskets, no welding or cutting: around two hours in the workshop for a well-equipped mechanic. The exhaust is built to the VIN of your BMW Z4 G29.

What price and lead time for a Rog exhaust on the BMW Z4 G29?

The price depends on the configuration and is shown on the product page, in your currency. Allow 20 working days from order confirmation to delivery. Delivery is free and the exhaust comes with a 3-year warranty.

Valved Exhaust System for BMW Z4 G29 B48 2.0T (2019-2022)

From £2,125 · 3-year warranty

Configure my exhaust

Unsure about your configuration? Write to us.

Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you drive and on your BMW Z4 G29. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to push a sale: we help you choose, even if that means a cheaper option because it suits the way you drive. Write to us: we reply in writing, in English.

Rog is a French brand, and the way we work comes down to one idea: an exhaust system should be sold with advice, not just a product page. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.

Further reading