












Valved Exhaust System for BMW 640i N55 F06 / F12 / F13 3.0T (2012-2017)
Configuration
BMW 640i F06 Valved Exhaust, F12 / F13 3.0T N55 (2012-2017)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity ratings are not yet available for this model.
Which valved exhaust for a BMW 640i F06, F12 or F13?
640i F06 valved exhaust. A made-to-order 640i F06 exhaust system: every 640i F06 exhaust is built from your VIN, with the sound you choose, in stainless steel or titanium. The Rog system for the BMW 640i N55 is a valved cat-back exhaust for the F06 Gran Coupé, F12 convertible and F13 coupé, built to your VIN in 304 stainless steel or titanium for the 320 hp, 450 Nm turbo six-cylinder. Valves open, the 6 Series gains an assertive presence from idle; closed, it remains a hushed grand tourer.
Sound, options and fitting in detail: our BMW 640i F06 / F12 / F13 guide.
The 640i comes as the four-door Gran Coupé F06, the Convertible F12 and the Coupé F13, three 6 Series silhouettes built around the N55, a 3.0-litre single-turbo straight six, smooth and robust, delivering 320 hp and 450 Nm. Today it is a GT whose value for money is hard to beat. All three body styles take the same system, documented for cars from 2012 to 2017; outside that period your VIN settles it, and the M6 has its own page.
Tuned for hushed cruising, the factory system says nothing about this engine's deep, mechanical tone. With the Rog cat-back and its valves open, the 6 Series gains an assertive presence from idle, a raspy, full-bodied climb and crisp crackles on the overrun; with the valves closed, it returns to the discretion of a grand tourer. That is the dual personality a GT should always have.
Under the body nothing is welded: the system, bent to your VIN, connects with clamps and gaskets in around two hours, and the factory valve control stays active, or the Rog remote replaces it.
The “Downpipe” option sells the N55 downpipe, with its catalytic converter; without a remap it only changes the voice and saves a little weight. A 640i covering European motorways keeps its emissions control with the 200-cell variant; the 100-cell is accepted or not depending on the vehicle and the rules of your country, and the decat version gives the freest sound. Among 6 Series owners, 304 stainless steel and titanium, about 40% lighter and tinted, share the honours.
The sound, configuration by configuration
On a scale of 0 to 10, a stock BMW 640i F06 / F12 / F13 sits around 3. With the Rog system alone and the valves open, it goes to around 7: already night and day, and the configuration to start with. Beyond 7, the Downpipe option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10.
Made from your VIN, fitted by your garage
Every system is made from your VIN and checked before production: it fits your BMW 640i F06 / F12 / F13 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.
BMW 640i N55 F06 / F12 / F13 3.0T exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicles and chassis codes | BMW 640i Gran Coupé F06, Convertible F12 and Coupé F13 |
| Engine | N55, 3.0-litre turbocharged inline-six, 320 hp and 450 Nm |
| Power in kW | 235 kW |
| Years | 2012-2017 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Downpipe (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours on a lift |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the BMW 640i N55 F06 / F12 / F13 3.0T exhaust.
Does the 640i Coupé F13 or Convertible F12 take the same system as the Gran Coupé F06?
Yes: all three 640i body styles share this system, with the same N55 and the same material and downpipe options. We check the VIN of your Coupé or Convertible before manufacture, as for every order.
Does the N55 in a 640i handle a Stage 2 well?
The Stage 2 figures published are 390 hp and 590 Nm, with a downpipe and a remap at a tuner; the cat-back alone runs on the factory engine management.
BMW 640i N55 F06 / F12 / F13 3.0T with a Rog exhaust: what should you know about vehicle inspection?
In its most common configuration, cat-back alone or a 200-cell downpipe, the GT keeps its catalytic converter, and with its valves closed it is as discreet as in the showroom: that is how it should be presented. A 100-cell downpipe will be accepted or not depending on the vehicle and the rules of your country.
Does a GT like the 640i need a sports exhaust?
It gains a second personality: valves closed, cruising comfort stays intact; valves open, the straight six finally makes itself heard on the weekend drive, roof down for the F12 Convertible.
Will a 640i F06, F12 or F13 drone on the motorway?
No: with the valves closed, the gases run through the cruising silencer and the cabin keeps the calm of a grand tourer, even after several hours on the road.
BMW 640i N55 F06 / F12 / F13 3.0T: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
BMW 640i F06 / F12 / F13: factory valves or Rog valves?
If your BMW 640i F06 / F12 / F13 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.
Rog expert guide
BMW 640i F06 / F12 / F13 exhaust: which one to choose?
Coupé F13, convertible F12 or Gran Coupé F06: a 640i calls for a valved exhaust, able to reveal its N55 six-cylinder without sacrificing grand-touring comfort. The Rog exhaust plays this double role; we make it from the VIN of your...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in the UK.
The MOT and your exhaust
At the MOT, exhaust noise is judged by ear, with no sound meter: valves closed, your car sounds very close to stock. A cat-back leaves your factory cat and sensors untouched, a 200-cell sports cat keeps emissions control, and the MOT tester decides.
On the road
Valves closed around town, your car sounds very close to stock, and you open them whenever you like. Where councils use noise cameras, they target behaviour such as revving and racing.
Your documents
Each system is built from the VIN on your V5C, and an exhaust isn't one of the changes you record on it. We send the technical documentation free on request, for the MOT or for your insurer.
Your insurance
Insurers usually want to know about modifications, so let yours know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Valved exhaust comparison for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleFrom order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleValved exhaust comparison for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleValved exhaust comparison for the Mercedes A45 W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in the UK? What the MOT checks.
The sound you choose, and a discreet car when it matters: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
