












Valved Exhaust System for BMW X6 35i N55 F16 3.0T (2015-2019)
Configuration
BMW X6 35i F16 Valved Exhaust 3.0T N55 (2015-2019)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The BMW X6 35i N55 F16 exhaust in detail.
BMW X6 35i F16 Valved Exhaust N55: a coupé silhouette on a large SUV base, the X6 F16 embraces a style that does not go unnoticed. BMW X6 35i F16 exhaust system made to order: every BMW X6 35i F16 valved exhaust is built from your VIN. As a 35i, it uses the N55, a 3.0-litre turbocharged inline-six with 306 hp and 400 Nm, whose natural balance brings great smoothness and abundant torque when accelerating. Examples from 2015 to 2019 are covered, while the X6 M F86 and the X6 40i G06 have separate pages.
The X6 was designed to stand out, but its factory exhaust is as discreet as that of a conventional SUV, relegating the inline-six’s fluid voice behind road noise. The contrast is striking. Open the valves on our cat-back: a full, hoarse six-cylinder, present from start-up and frankly sporty under acceleration, in keeping with the silhouette; close them, and the serenity of a large SUV returns for long journeys.
For fitting, about two hours, clamps, gaskets and no welding; the system is bent to your X6’s VIN, and its valves follow the factory control or the Rog remote.
The “Downpipe” option sells the N55’s downpipe, which we explicitly document for the F16; on its own, it only changes the voice and slightly the weight. For this six-cylinder coupé SUV, the 200-cell catalyst preserves exhaust gas treatment; with 100 cells, it is accepted or not depending on the car and the rules in your country, and the decat version gives the freest sound. 304 stainless steel stays understated, while titanium, around 40% lighter, underlines the coupé’s style with a brushed, gold or purple finish.
The sound, configuration by configuration
On a scale of 0 to 10, a stock BMW X6 35i F16 sits around 3. With the Rog system alone and the valves open, it goes to around 7: already night and day, and the configuration to start with. Beyond 7, the Downpipe option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10.
Made from your VIN, fitted by your garage
Every system is made from your VIN and checked before production: it fits your BMW X6 35i F16 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.
BMW X6 35i N55 F16 3.0T exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | BMW X6 xDrive35i F16 |
| Engine | N55, 3.0-litre turbocharged inline-six, 306 hp and 400 Nm |
| Years | 2015-2019 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Downpipe (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the BMW X6 35i N55 F16 3.0T exhaust.
M40i or 35i badge: is my X6 35i F16 really covered?
Yes: BMW confirms that petrol 3.0-litre X6 F16s are 35is with the N55 engine, and we have corrected the M40i badge in our data; your VIN is still checked before manufacturing.
How much does a remapped X6 35i F16 gain?
We quote Stage 2 figures of 368 hp and 557 Nm, with downpipe and a map by a tuner; as long as you stick with the cat-back, the N55 keeps its 306 hp.
BMW X6 35i N55 F16 3.0T with a Rog exhaust: what should you know about vehicle inspection?
Presented with the valves shut, with the factory catalytic converter or the 200-cell downpipe, it sounds and cleans its gases like a standard model; with the 100-cell, acceptance depends on the vehicle and your country’s rules.
My X6 35i dates from 2014: does this apply to it?
Our system now starts in 2015, whereas our previous reference cited 2014; send us the VIN and we decide before building.
Does the X6’s style deserve a more present voice?
That is the whole point: with the valves open, the inline-six matches the coupé silhouette, and with the valves closed, the SUV becomes as discreet as on delivery day.
BMW X6 35i N55 F16 3.0T: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
BMW X6 35i N55 F16 3.0T: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
BMW X6 35i F16: factory valves or Rog valves?
If your BMW X6 35i F16 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.
Rog expert guide
BMW X6 35i N55 F16 exhaust: which one to choose?
With its coupé silhouette on a large SUV base, the X6 F16 has a style that does not go unnoticed. As a 35i, it relies on the 306 hp N55 turbocharged inline-six, yet its factory exhaust smooths away all of...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in the UK.
The MOT and your exhaust
At the MOT, exhaust noise is judged by ear, with no sound meter: valves closed, your car sounds very close to stock. A cat-back leaves your factory cat and sensors untouched, a 200-cell sports cat keeps emissions control, and the MOT tester decides.
On the road
Valves closed around town, your car sounds very close to stock, and you open them whenever you like. Where councils use noise cameras, they target behaviour such as revving and racing.
Your documents
Each system is built from the VIN on your V5C, and an exhaust isn't one of the changes you record on it. We send the technical documentation free on request, for the MOT or for your insurer.
Your insurance
Insurers usually want to know about modifications, so let yours know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Valved exhaust comparison for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleFrom order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleValved exhaust comparison for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleValved exhaust comparison for the Mercedes A45 W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in the UK? What the MOT checks.
The sound you choose, and a discreet car when it matters: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
