Brushed titanium valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998), pure sound without resonator, Rog gloss black tips - RogMotorsport
Close-up of the titanium valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998): TIG welds and finish - RogMotorsport
Detail of the titanium tubing on the valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998) - RogMotorsport
Rog valve control box for Porsche 911 Carrera 3.6 type 993 (1994-1998): control unit, remote control and case supplied with the exhaust system - RogMotorsport
Rog exhaust valve remote control for Porsche 911 Carrera 3.6 type 993 (1994-1998) - RogMotorsport
RogMotorsport parcel: exhaust system for Porsche 911 Carrera 3.6 type 993 (1994-1998) delivered protected in its reinforced box - RogMotorsport
Rog valved silencer for Porsche 911 Carrera 3.6 type 993 (1994-1998): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
Rog exhaust tip in polished stainless chrome for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport
Rog exhaust tip in blued titanium for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport
Rog exhaust tip in gloss black for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport

Valved Exhaust System for Porsche 911 Carrera 993 3.6 (1994-1998)

    Free delivery
    Brushed titanium valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998), pure sound without resonator, Rog gloss black tips - RogMotorsport
    Close-up of the titanium valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998): TIG welds and finish - RogMotorsport
    Detail of the titanium tubing on the valved exhaust for Porsche 911 Carrera 3.6 type 993 (1994-1998) - RogMotorsport
    Rog valve control box for Porsche 911 Carrera 3.6 type 993 (1994-1998): control unit, remote control and case supplied with the exhaust system - RogMotorsport
    Rog exhaust valve remote control for Porsche 911 Carrera 3.6 type 993 (1994-1998) - RogMotorsport
    RogMotorsport parcel: exhaust system for Porsche 911 Carrera 3.6 type 993 (1994-1998) delivered protected in its reinforced box - RogMotorsport
    Rog valved silencer for Porsche 911 Carrera 3.6 type 993 (1994-1998): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
    Rog exhaust tip in polished stainless chrome for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in blued titanium for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in gloss black for Porsche 911 Carrera 3.6 type 993 (1994-1998), R engraved near the outlet - RogMotorsport

    Configuration

    Porsche 911 Carrera 993 Valved Exhaust 3.6 (1994-1998)

    Read the guide for this model

    A question about this exhaust?

    Porsche911 Carrera 993

    The Porsche 911 Carrera 993 exhaust in detail.

    Valved exhaust for Porsche 911 Carrera 993 3.6: this Porsche 911 Carrera 993 exhaust system is made to order from your VIN. The whoosh of the fan, the metallic grain of the opposed cylinders, then a hoarse rumble that hardens at high revs: the 993, the last air-cooled 911, has a voice nothing can imitate. Its factory exhaust, designed for 1990s comfort, keeps most of it to itself. With the valves open, the Rog valved cat-back gives the flat-six a more present idle and a climb through the revs full of texture; with the valves closed, the car stays discreet for long journeys and town.

    The system is for the 993-type 911 Carrera with the 3.6-litre engine, 272 hp and 330 Nm in its original specification, before the Varioram variable intake enriched it, for the 1994 to 1998 model years. The Carrera S is not yet documented in our records: for that car, and for any 993 with a particular history, we use your VIN to check compatibility before manufacturing.

    We offer the system alone, without manifolds: it fits after the factory manifolds, which you keep. No welding or cutting, which matters on a collector’s car: band clamps, gaskets, about two hours on a lift. The valves are controlled by the Rog remote, with its box in the boot, or by a factory control if your car has one.

    The choice of material follows the use: 304 stainless steel, with its full, round sound, resists salt and damp, while titanium weighs around 40% less for the same design and sounds more metallic at high revs, in brushed, gold or purple. The tips, for their part, come in chrome, gloss black or blued titanium, from the most understated to the boldest.

    The sound, configuration by configuration

    On a scale of 0 to 10, a stock Porsche 911 Carrera 993 sits around 3. With the Rog system and the valves open, it goes to around 7: already night and day.

    Made from your VIN, fitted by your garage

    Every system is made from your VIN and checked before production: it fits your Porsche 911 Carrera 993 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.

    Porsche 911 Carrera 3.6 type 993 exhaust specifications.

    System typeValved cat-back (valve exhaust), built to your VIN
    Vehicle and generationPorsche 911 Carrera 3.6, type 993, coupé, convertible and Targa (1996-1998)
    Engine3.6-litre air-cooled flat-six, 272 hp and 330 Nm (initial specification)
    Years1994-1998
    Materials and finishes304 stainless steel or titanium; titanium in brushed, gold or purple
    ValvesFactory valve control if the car has it, otherwise the Rog remote
    TipsChrome, gloss black or blued titanium
    FittingClamps and gaskets, no welding, about 2 hours
    Manufacturing and deliveryMade to order, 20 working days, free delivery
    Warranty3 years, parts and workmanship

    Questions about the Porsche 911 Carrera 3.6 type 993 exhaust.

    My 993 is a Carrera S: is this system meant for it?

    This system is designed for the 993-type Carrera 3.6; the Carrera S is not yet documented in our records. We do not rule it out, though: your car’s VIN lets us decide before starting any manufacturing.

    Does an equipped 993 benefit from an ECU remap?

    The system works with the 993’s factory electronics, with no adjustment at all. Without an ECU remap, it changes the voice and lightens the rear; no Stage 2 figure is published for this air-cooled flat-six.

    What does the Rog system change on a 993 at vehicle inspection?

    Very little if you close the valves: the flat-six regains its factory discretion, the position to adopt for the test. As the system is a cat-back, the factory manifolds stay fitted, and we offer neither 100-cell nor decat versions.

    Can a 993 ever go back to its original exhaust system?

    Yes: fitting involves no cutting or welding, just clamps and gaskets. Keep your 993’s original system, it can be refitted if you wish, a reassuring point on a collector’s car.

    Coupé, convertible or Targa: does the 911 Carrera 3.6 993 take the same system?

    Yes. On the 911 Carrera 3.6 993, coupé, convertible and Targa share the flat-six and the same Rog system, fitted with clamps and gaskets. Your VIN is only used to confirm the version and model year before manufacturing.

    Porsche 911 Carrera 3.6 type 993: Does a valved exhaust system drone?

    No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.

    Porsche 911 Carrera 993: factory valves or Rog valves?

    If your Porsche 911 Carrera 993 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.

    Rog expert guide

    Porsche 911 Carrera 993 exhaust: which one to choose?

    The 911 Carrera type 993 holds a special place in Porsche history: it is the last 911 with an air-cooled engine. Its 3.6-litre flat-six has a unique voice, blending the whoosh of the cooling fan with the metallic grain of...

    Read the guide for my model

    In detail

    Rog Advisor

    A question about this exhaust?

    Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.

    Your configuration is attached to the question.

    The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.

    Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us

    Your country

    Rog in the UK.

    The MOT and your exhaust

    At the MOT, exhaust noise is judged by ear, with no sound meter: valves closed, your car sounds very close to stock. A cat-back leaves your factory cat and sensors untouched, a 200-cell sports cat keeps emissions control, and the MOT tester decides.

    On the road

    Valves closed around town, your car sounds very close to stock, and you open them whenever you like. Where councils use noise cameras, they target behaviour such as revving and racing.

    Your documents

    Each system is built from the VIN on your V5C, and an exhaust isn't one of the changes you record on it. We send the technical documentation free on request, for the MOT or for your insurer.

    Your insurance

    Insurers usually want to know about modifications, so let yours know: our free technical documentation makes it easy.

    Reviews imported from our previous system and translated from French; verified purchases carry the badge.

    Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.

    The detail.
    From every angle.

    Turn the car over. Explore the system.
    Enter the Rog Workshop.

    Explore the 3D Workshop Demonstration based on BMW M2 F87.
    3D model & credits
    Rog demonstration car based on the BMW M2 F87

    Drag to change your viewpoint.

    THE Rog CRAFT

    Our process.

    From the first bend to the last check. The same care at every step.

    1. Design

      Designed for your vehicle.

      Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.

    2. Manufacture

      Crafted with precision.

      Tube bending, part fitting and TIG welding: every joint receives the same care.

    3. Finishing

      Material, elevated.

      The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.

    4. Assembly

      Every part in its place.

      Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.

    5. Inspection

      Check. Then approve.

      Geometry, welds, connections and gas flow: the key points are inspected before shipping.

    6. Shipping

      Ready to join you.

      Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.

    Attention to detail.At every step.

    Free delivery

    Customer builds

    Your videos & photos

    The Rog lines fitted on our customers' vehicles, in real conditions.

    Builds
    500+
    Brands
    28
    Satisfaction
    4,9

    The journal

    News & advice

    11 Nov 2026 2 min read

    From order to fitting of your Rog exhaust

    Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...

    Read the article
    11 Nov 2026 7 min read

    How to configure your Rog exhaust

    A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Audi RS3 8Y

    Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Mercedes A45 W177

    Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...

    Read the article
    6 Nov 2026 5 min read

    Valved exhaust comparison for the BMW M2 G87

    Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    2 Nov 2026 12 min read

    Exhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)

    Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...

    Read the article
    1 Nov 2026 9 min read

    Changing your exhaust: what inspections and approvals cost in 9 countries

    What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...

    Read the article
    29 Oct 2026 5 min read

    Is a cat-back exhaust legal in the UK? What the MOT checks.

    The sound you choose, and a discreet car when it matters: what you get with a Rog valved exhaust in...

    Read the article

    No article matches this search.

    All articles