Brushed titanium valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), pure sound without resonator, Rog gloss black tips - RogMotorsport
Close-up of the titanium valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): TIG welds and finish - RogMotorsport
Detail of the titanium tubing on the valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) - RogMotorsport
Rog valve control box for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): control unit, remote control and case supplied with the exhaust system - RogMotorsport
Rog exhaust valve remote control for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) - RogMotorsport
RogMotorsport parcel: exhaust system for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) delivered protected in its reinforced box - RogMotorsport
Rog valved silencer for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
Rog exhaust tip in polished stainless chrome for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport
Rog exhaust tip in blued titanium for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport
Rog exhaust tip in gloss black for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport

Valved Exhaust System for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012)

    Free delivery
    Brushed titanium valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), pure sound without resonator, Rog gloss black tips - RogMotorsport
    Close-up of the titanium valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): TIG welds and finish - RogMotorsport
    Detail of the titanium tubing on the valved exhaust for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) - RogMotorsport
    Rog valve control box for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): control unit, remote control and case supplied with the exhaust system - RogMotorsport
    Rog exhaust valve remote control for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) - RogMotorsport
    RogMotorsport parcel: exhaust system for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012) delivered protected in its reinforced box - RogMotorsport
    Rog valved silencer for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
    Rog exhaust tip in polished stainless chrome for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in blued titanium for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in gloss black for Porsche Boxster / Cayman 987.2 2.9 / 3.4 (2009-2012), R engraved near the outlet - RogMotorsport

    Configuration

    Porsche Boxster 987.2 Valved Exhaust, Cayman 2.9 / 3.4 (2009-2012)

    Read the guide for this model

    A question about this exhaust?

    PorscheBoxster / Cayman 987

    The Porsche Boxster and Cayman 987.2 exhaust in detail.

    Valved exhaust for Porsche Boxster 987.2 / Cayman 2.9 / 3.4: this Porsche Boxster 987.2 exhaust system is made to order from your VIN. Boxster or Cayman, the 2009 to 2012 987.2 generation gets 2.9 and 3.4-litre naturally aspirated flat-sixes, with 255 to 320 hp and 290 to 370 Nm depending on the version. A single Rog system covers both body styles. The 987.1 and the 981 have their own system; your VIN lets us confirm compatibility before manufacturing.

    It is all in the climb through the revs, and the dated factory exhaust is made to erase it. Mid-engine, short exhaust: every change can be heard immediately. With the valves open, the Rog cat-back restores the flat-six’s metallic, hoarse tone, present from idle, with harmonics that rise with the revs; with the valves closed, the original discretion stays intact.

    We offer the catalysed manifolds under the “Manifold” option. On these non-turbo engines, their contribution stays modest, 3 to 8%, and only exists with an ECU remap; the page publishes Stage 2 figures from 284 hp for the 255 hp version up to 357 hp and 415 Nm for the 320 hp version. With 200 cells, the car treats its emissions just as stock.

    About two hours in the workshop, clamps and gaskets, no welding. The valves follow the factory control if there is one, otherwise the Rog remote, from inside the cabin or outside. Compared with 304 stainless steel and its rounder sound, titanium weighs around 40% less for the same design and comes in brushed, gold or purple. The tips are available in chrome, gloss black or blued titanium.

    The sound, configuration by configuration

    On our scale of 0 to 10, the Rog system alone, valves open, sits around 7: the configuration to start with. Beyond 7, the Manifold option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10.

    Made from your VIN, fitted by your garage

    Every system is made from your VIN and checked before production: it fits your Porsche Boxster / Cayman 987.2 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.

    Porsche Boxster / Cayman type 987.2 exhaust specifications.

    System typeValved cat-back (valve exhaust), built to your VIN; fitted with clamps and gaskets, no welding, about 2 hours
    Vehicles and generationPorsche Boxster and Cayman, type 987.2
    Engine2.9 or 3.4-litre naturally aspirated flat-six, 255 to 320 hp and 290 to 370 Nm depending on the version
    Years2009-2012
    Materials and finishes304 stainless steel or titanium; titanium in brushed, gold or purple
    ValvesFactory valve control if the car has it, otherwise the Rog remote
    Manifold (option)Manifolds with 200-cell or 100-cell catalytic converters, or decat
    TipsChrome, gloss black or blued titanium
    Manufacturing and deliveryMade to order, 20 working days, free delivery
    Warranty3 years, parts and workmanship

    Questions about the Porsche Boxster / Cayman type 987.2 exhaust.

    Boxster or Cayman 987.2: is it really the same system?

    Yes, this system is designed for both the Boxster and the Cayman 987.2, from 2009 to 2012, in 2.9 and 3.4 litres. The VIN lets us check your car before manufacturing.

    What can a 987.2 remapped with sports manifolds aim for?

    Depending on the version, we quote Stage 2 figures from 284 hp and 326 Nm for the 255 hp version to 357 hp and 415 Nm for the 320 hp one. Without manifolds, no map is needed, for the Boxster as for the Cayman.

    Boxster or Cayman 987.2 at vehicle inspection: what should be fitted?

    Valves closed and factory or 200-cell manifolds: that is the combination that keeps emissions control and a sound close to stock. In 100-cell form, acceptance depends on the vehicle and your country’s rules.

    Is titanium justified on a Cayman or Boxster 987.2?

    It weighs around 40% less than stainless steel for the same design, a saving you feel behind you on a mid-engined car, with a more crystalline note at high revs. 304 stainless steel, with a rounder sound, stands up to winter just as well.

    Porsche Boxster / Cayman type 987.2: Does a valved exhaust system drone?

    No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.

    Porsche Boxster / Cayman 987.2: factory valves or Rog valves?

    If your Porsche Boxster / Cayman 987.2 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.

    Rog expert guide

    Porsche Boxster / Cayman 987.2 exhaust: which one to choose?

    The 987 is the gateway to Porsche's mid-engined flat-six, and an excellent buy on its way to becoming a youngtimer. Its dated factory exhaust holds a lot back: replacing it transforms the car more than any other modification. For your...

    Read the guide for my model

    In detail

    Rog Advisor

    A question about this exhaust?

    Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.

    Your configuration is attached to the question.

    The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.

    Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us

    Your country

    Rog in the UK.

    The MOT and your exhaust

    At the MOT, exhaust noise is judged by ear, with no sound meter: valves closed, your car sounds very close to stock. A cat-back leaves your factory cat and sensors untouched, a 200-cell sports cat keeps emissions control, and the MOT tester decides.

    On the road

    Valves closed around town, your car sounds very close to stock, and you open them whenever you like. Where councils use noise cameras, they target behaviour such as revving and racing.

    Your documents

    Each system is built from the VIN on your V5C, and an exhaust isn't one of the changes you record on it. We send the technical documentation free on request, for the MOT or for your insurer.

    Your insurance

    Insurers usually want to know about modifications, so let yours know: our free technical documentation makes it easy.

    Reviews imported from our previous system and translated from French; verified purchases carry the badge.

    Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.

    The detail.
    From every angle.

    Turn the car over. Explore the system.
    Enter the Rog Workshop.

    Explore the 3D Workshop Demonstration based on BMW M2 F87.
    3D model & credits
    Rog demonstration car based on the BMW M2 F87

    Drag to change your viewpoint.

    THE Rog CRAFT

    Our process.

    From the first bend to the last check. The same care at every step.

    1. Design

      Designed for your vehicle.

      Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.

    2. Manufacture

      Crafted with precision.

      Tube bending, part fitting and TIG welding: every joint receives the same care.

    3. Finishing

      Material, elevated.

      The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.

    4. Assembly

      Every part in its place.

      Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.

    5. Inspection

      Check. Then approve.

      Geometry, welds, connections and gas flow: the key points are inspected before shipping.

    6. Shipping

      Ready to join you.

      Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.

    Attention to detail.At every step.

    Free delivery

    Customer builds

    Your videos & photos

    The Rog lines fitted on our customers' vehicles, in real conditions.

    Builds
    500+
    Brands
    28
    Satisfaction
    4,9

    The journal

    News & advice

    11 Nov 2026 2 min read

    From order to fitting of your Rog exhaust

    Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...

    Read the article
    11 Nov 2026 7 min read

    How to configure your Rog exhaust

    A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Audi RS3 8Y

    Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Mercedes A45 W177

    Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...

    Read the article
    6 Nov 2026 5 min read

    Valved exhaust comparison for the BMW M2 G87

    Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    2 Nov 2026 12 min read

    Exhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)

    Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...

    Read the article
    1 Nov 2026 9 min read

    Changing your exhaust: what inspections and approvals cost in 9 countries

    What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...

    Read the article
    29 Oct 2026 5 min read

    Is a cat-back exhaust legal in the UK? What the MOT checks.

    The sound you choose, and a discreet car when it matters: what you get with a Rog valved exhaust in...

    Read the article

    No article matches this search.

    All articles