Ferrari 360 Modena: bringing out the naturally aspirated V8, the complete guide
The 360 Modena is officially a classic: the first all-aluminium Ferrari, a naturally aspirated V8 revving to 8,500 rpm, and auction prices that keep climbing. A quality exhaust is the modification that transforms it, while respecting its status. Here you will find everything that matters before configuring the exhaust for your Ferrari 360 V8: catalytic converter, material, valves, tips and the French MOT.
Written by ROG Motorsport · Updated
Your ROG exhaust for the Ferrari 360 V8
From €3,990 in stainless steel, €4,990 in titanium
Configure my exhaust- Vehicles
- Ferrari 360 3.6 V8 (2003-2005)
- Engine
- 400 hp · 373 Nm
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted front pipes with 200 or 100 cells, or decat
- Valves
- ROG remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
The Ferrari naturally aspirated V8: the flat-plane crank, the legendary voice
The naturally aspirated V8 in your 360 Modena is one of the most revered engines in history: flat-plane crank, a dizzying climb to 8,500 rpm, a cry the whole world associates with Maranello. These engines will never be produced again, and their values shout it too. The factory exhaust, however well made, holds back part of the spectrum that the standards of the time already imposed.
On a naturally aspirated Ferrari V8, the exhaust is the instrument. The ROG exhaust saves weight, frees the high harmonics and turns every climb through the revs into an event. The valves keep your early-morning departures discreet.
How the exhaust on your Ferrari 360 V8 is put together
An exhaust system is best understood in two parts. Here is what each one does, and what ROG replaces.
The cat-back is the complete exhaust system
It is everything you can see under your Ferrari 360 V8, from the outlet of the front section to the tips: pipes, silencer, valves. This is the part where most of our research and development goes: it is what shapes the sound, and it is enough on its own to transform the car.
The front section, where the catalytic converter sits
On your Ferrari 360 V8, these are the front pipes, just after the manifolds. They contain the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing it is optional: it frees up the flow, and it is the ECU remap that turns that into horsepower.
Your Ferrari 360 V8 in figures
An exhaust system is judged first by ear and on the scales. The extra horsepower comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures.
The ROG exhaust works with or without an ECU remap. To get the full potential out of your Ferrari 360 V8, we recommend taking it to an approved tuning centre afterwards.
Let's be honest, it is our trademark: on a naturally aspirated Ferrari V8, there are no massive gains to be had from the exhaust. What changes: breathing, response, and an entirely new dimension of sound. You do not modify a naturally aspirated Ferrari for lap times: you do it for what you experience behind the wheel.
Configuring your exhaust, step by step
3 choices, in the same order as the product page configurator.
-
Step 1 of 3: Material: stainless steel or titanium
For your Ferrari 360 V8, the exhaust costs €3,990 in stainless steel and €4,990 in titanium.
304 stainless steel
3 990 €
- Weight
- Baseline
- Sound
- Full and rounded
The safe bet: strong, corrosion-proof, with a full, rounded sound. The best value for money.
Titanium
4 990 €
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
It makes the exhaust around 40% lighter for the same design. Its note is more metallic and clearer higher up the rev range, and its finish ranges from brushed to blued.
No worries on durability: 304 stainless steel shrugs off winter road salt and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 3: Front section: front pipes and catalytic converter
Optional: the front pipes on your Ferrari 360 V8, with their catalytic converter. Each option is placed on our sound scale of 0 to 10, valves open, with the factory exhaust at 3.
Cat-back only
Included
7/10Factory emissions control
The factory front section stays in place. It is already a complete transformation, and the choice of many of our customers.
200-cell sports catalytic converter
+1 570 €
8/10Road use and French MOT
More flow, emissions control retained: the right option for road use.
100-cell sports catalytic converter
+1 570 €
9/10French MOT pass not guaranteed
More open than the 200-cell: the sound hardens at high revs and emissions control is reduced.
Decat
+1 100 €
10/10Track use only
Flow with no filter at all: the rawest sound and the sharpest response.
Sound intensity, on a scale of 0 to 10
- 10/10Decat front pipes + ROG cat-back
- 9/10100-cell sports catalytic converter + ROG cat-back
- 8/10200-cell sports catalytic converter + ROG cat-back
- 7/10ROG cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports catalytic converter it can come on, because the rear oxygen sensor reads less cleaning. Nothing mechanical is wrong: an ECU remap or a session with a diagnostic tool sorts it out. Without a catalytic converter, you will need an ECU remap. If it happens to you, call us and we will point you in the right direction. Passing the French MOT with a sports exhaust.
-
Step 3 of 3: Valves: ROG remote or factory control
Two ways to control the valves on your Ferrari 360 V8.
ROG remote
A discreet control unit in the boot and a two-button remote: you open and close whenever you like, independently of the drive modes. For fitting, we support you by phone or by email.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
For vehicles fitted with factory valves: the exhaust connects to their control and the drive modes stay in charge, with no extra control unit.
At 130 km/h, many sports exhausts drone. Here, with the valves closed, the exhaust flows through the silencer and stays composed when cruising; open, it makes itself heard when you choose. More about exhaust drone.
The ROG sound signature on the naturally aspirated V8
The flat-plane crank gives this V8 its unique scream, shrill and furious towards the redline. Our exhaust reduces back pressure and frees that scream completely: every gear becomes an event, every tunnel a temptation. With the valves closed, the car stays liveable every day.
From order to fitting
-
Configuration
You configure the exhaust and enter the VIN from box E of your registration certificate.
-
Check
Your VIN is checked before any manufacturing begins.
-
Manufacturing
The exhaust is produced to order, for your vehicle.
-
Delivery
Free in Europe, insured parcel, tracking number from dispatch.
-
Fitting
Around two hours in the workshop, with no welding or cutting.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of delivery
- Payment
- In instalments with Klarna
- Installation
- At the garage of your choice
Is your Ferrari 360 V8 still under the manufacturer's warranty? In Europe, the manufacturer cannot refuse it simply because a part from another brand has been fitted: it is up to them to prove the fault comes from it. Our article on the manufacturer's warranty.
Our recommendations for your Ferrari 360 V8
-
Daily driving
3 990 €
- Stainless
- Cat-back only
- ROG remote
Your Ferrari 360 V8 stays easy to live with, the factory emissions control is retained, and you open the valves when you decide.
View this configuration -
Fast road
6 560 €
- Titanium
- 200-cell front pipes
- ECU remap
The best of both worlds: character and breathing, with emissions control retained.
View this configuration -
Track
6 090 €
- Titanium
- Decat front pipes
- Stage 2
The most extreme configuration, for track use only.
View this configuration
Every Ferrari 360 V8 has its own history and use: if none of these profiles fits you, let's talk.
Ferrari 360 V8: your questions
How much power does an exhaust add on the Ferrari 360 V8?
As standard, the Ferrari 360 V8 produces 400 hp and 373 Nm. The exhaust alone acts first on sound, breathing and weight; the extra horsepower comes from an ECU remap. With a Stage 2 build, the published figures reach 445 hp and 420 Nm.
Stainless steel or titanium: which material for the Ferrari 360 V8?
For the Ferrari 360 V8, the ROG exhaust costs €3,990 in stainless steel and €4,990 in titanium. Stainless steel is the safe bet, with a full sound; titanium makes the exhaust around 40% lighter and gives a more metallic note higher up the rev range.
Do you need to replace the catalytic converter on the Ferrari 360 V8?
It is not compulsory. The cat-back alone is enough to change the character of the Ferrari 360 V8. Replacing the front pipes is how you go further, together with an ECU remap: 200 cells for the road, 100 cells or decat for more radical use.
Does the Ferrari 360 V8 pass the French MOT with a ROG exhaust?
The cat-back only and the 200-cell converter keep emissions control: present the Ferrari 360 V8 with the valves closed. With the 100-cell converter, a pass is no longer guaranteed; the decat fails the emissions test.
How is the ROG exhaust fitted on the Ferrari 360 V8?
With clamps and gaskets, no welding or cutting: around two hours in the workshop for a well-equipped mechanic. The exhaust is built to the VIN of your Ferrari 360 V8.
What price and lead time for a ROG exhaust on the Ferrari 360 V8?
From €3,990 to €6,560 depending on the configuration. Allow 20 working days from order confirmation to delivery. Delivery is free and the exhaust comes with a 3-year warranty.
Unsure about your configuration? Give us a call.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you use your Ferrari 360 V8. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to sell to you over the phone: we help you choose, even if that means a cheaper option because it suits the way you drive.
ROG is a French brand, and the way we work comes down to one idea: an exhaust system should be sold with advice, not just a product page. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG SLC43 R172 V6 biturbo: an open-air V6, the exhaust system guide The SLC43 is a compact roadster with a retractable hard top, which AMG equipped with a 3.0-litre twin-turbo...
- Mercedes-AMG E55 W211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...