Ferrari F12 Berlinetta: the V12's full voice, the complete guide
The F12 Berlinetta defined its era: 740 hp of naturally aspirated V12 in a beautifully designed GT, now at a used price that makes it one of the best emotion-per-euro buys in the world. The V12 is just waiting to be set free. This guide sets out, for your Ferrari F12berlinetta V12, what each choice changes: material, front section, sound, valves and fitting.
Your valved exhaust for Ferrari F12berlinetta V12 is configured from your VIN, and the Ferrari Valved Exhaust page brings together all our Ferrari systems.
Valved Exhaust System for Ferrari F12berlinetta V12 6.3 (2013-2016)From 2 890 € · free delivery · 20 working days
View
Your Rog exhaust for Ferrari F12berlinetta V12
Price shown on the product page, in your currency
Configure my exhaustThe short answer.
- Vehicles
- Ferrari F12berlinetta 6.3 V12 (2013-2016)
- Engine
- 740 hp · 690 Nm
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted front pipes with 200 or 100 cells, or decat
- Valves
- Rog remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
The Ferrari V12: the greatest naturally aspirated engine in the world
The naturally aspirated V12 in your F12 Berlinetta is the noblest thing the car world has to offer: the direct heir to Maranello's racing V12s, revving to stratospheric heights, with mechanical refinement that has no equal. Every example is a piece of history on the road. The factory exhaust is beautifully made, but it favours discretion: the V12 has an upper register it never delivers.
The Rog exhaust unlocks that register: the highest harmonics are freed, the presence becomes total, and the valves give you back grand touring discretion on demand. On a Ferrari V12, it is the ultimate refinement.
What makes up the exhaust on your Ferrari F12berlinetta V12
An exhaust system is best understood in two parts. Here is what each one does, and what Rog replaces.
The cat-back is the complete exhaust system
It is everything you can see under your Ferrari F12berlinetta V12, from the outlet of the front section to the tips: pipes, silencer, valves. This is where our research and development is focused, and it is what shapes the sound. On its own, it changes the character of the car.
The front section, where the catalytic converter sits
On your Ferrari F12berlinetta V12, it is the front pipes, just after the manifolds. They contain the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing this part is optional: it frees up the flow, and an ECU remap is what turns that into power.
Your Ferrari F12berlinetta V12 in figures
On a modern car, an exhaust system first changes the voice, the breathing and the weight at the rear. Power, on the other hand, comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures.
Our exhaust systems work perfectly with or without an ECU remap. On your Ferrari F12berlinetta V12, however, we recommend having it done at an approved tuning centre: it is what lets the engine reach its full potential.
Let's be honest: on a naturally aspirated V12, the measurable gains from an exhaust remain modest, and anyone who promises you otherwise is lying. What changes is the breathing, the response and, above all, a dimension of sound the factory car never delivers. On a Ferrari V12, that is exactly what you are after.
Configuring your exhaust, step by step
3 choices, in the same order as the product page configurator.
-
Step 1 of 3: Material: stainless steel or titanium
Titanium costs more than stainless steel; the price of each version is shown on the product page, in your currency.
304 stainless steel
- Weight
- Baseline
- Sound
- Full and rounded
The benchmark for high-end exhausts: tough, corrosion-proof, with a full, rounded sound. The choice of most of our customers.
Titanium
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
Around 40% lighter than stainless steel for the same design, with a more metallic sound that turns crystal-clear at high revs. Its finish ranges from brushed to blued tints.
Over time, both hold up: 304 stainless steel stands up to winter salt and damp, and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 3: Front section: front pipes and catalytic converter
Optional: the front pipes on your Ferrari F12berlinetta V12, with their catalytic converter. Sound intensity is rated on our scale of 0 to 10, valves open; the factory exhaust scores 3.
Cat-back only
Included
7/10Factory emissions control
The factory catalytic converter stays in place. The starting point and, for many of our customers, more than enough.
200-cell sports catalytic converter
8/10Road use and inspection
Emissions control is still very much there, and flow improves noticeably. The choice for everyday driving.
100-cell sports catalytic converter
9/10Inspection: depends on local rules
Half as many cells: flow comes close to a decat and the sound gains real aggression at high revs.
Decat
10/10Track use
No emissions control: maximum flow, raw sound, the sharpest revving.
Sound intensity, on a scale of 0 to 10
- 10/10Decat front pipes + Rog cat-back
- 9/10100-cell sports catalytic converter + Rog cat-back
- 8/10200-cell sports catalytic converter + Rog cat-back
- 7/10Rog cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports cat, it can come on with some engines: the sensor placed after the catalytic converter measures a different level of emissions control from the original. It is not a mechanical failure, but a warning light should never be masked or cleared without dealing with its cause: the right answer is a catalytic converter suited to the engine, with a map by a tuner who takes it into account. The decat version, for track use only, almost always triggers it. If this happens to you, write to us and we will point you in the right direction. Passing vehicle inspection with a sports exhaust.
-
Step 3 of 3: Valves: Rog remote or factory control
Two ways to control the valves on your Ferrari F12berlinetta V12.
Rog remote
A small control unit fits in the boot. Two buttons, open and closed: the valves respond at any moment, whatever the drive mode. Simple to fit, and we stay on hand throughout the installation.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
If your vehicle is fitted with factory valves, the exhaust keeps their existing control. The drive modes decide, just as they did from the factory, with no added electronics.
On the motorway, with the valves closed, the gases pass through the silencer, designed for cruising: no drone at a steady speed. You open up when you feel like it, not when the motorway decides for you. More about exhaust drone.
Your choices carry over to the product page: only the finishes, your VIN and the cart remain.
The Rog sound signature on the V12
The Ferrari V12 climbs like a musical instrument: deep and refined low down, screaming and crystalline towards the top. Our exhaust frees the very highest harmonics, the ones the factory exhaust never delivers, and turns the climb through the revs into a total experience. With the valves closed, grand touring takes over again.
From order to fitting
-
Configuration
You choose your exhaust and enter your VIN, found in box E of your registration document or at the base of the windscreen.
-
Check
We check compatibility with your VIN before manufacturing begins.
-
Manufacturing
Your exhaust is made to order, for your car.
-
Delivery
Free, insured to your door, tracked from dispatch.
-
Fitting
No welding or cutting: clamps and gaskets, around two hours on a lift.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of purchase
- Payment
- Card, PayPal or bank transfer
- Installation
- At the garage of your choice
What about the manufacturer's warranty on your Ferrari F12berlinetta V12? In Europe, a manufacturer cannot refuse warranty cover simply because a part from another brand has been fitted: it has to prove that the fault comes from that part. Our article on the manufacturer's warranty.
Our recommendations for your Ferrari F12berlinetta V12
-
Daily driving
- Stainless
- Cat-back only
- Rog remote
Your Ferrari F12berlinetta V12 stays easy to live with, the factory emissions control is retained, and you open the valves whenever you decide.
View this configuration -
Fast road
- Titanium
- 200-cell front pipes
- ECU remap
More sound, more breathing, and a car you can still present at vehicle inspection.
View this configuration -
Track
- Titanium
- Decat front pipes
- Stage 2
The most extreme configuration, for track use only.
View this configuration
And if you are still unsure, that is perfectly normal: it is exactly why we answer every message.
Ferrari F12berlinetta V12: your questions
How much power does an exhaust add on the Ferrari F12berlinetta V12?
As standard, the Ferrari F12berlinetta V12 produces 740 hp and 690 Nm. An exhaust system on its own mainly changes the sound, the breathing and the weight; power is gained with an ECU remap. With a Stage 2 build, the published figures reach 814 hp and 767 Nm.
Stainless steel or titanium: which material for the Ferrari F12berlinetta V12?
The Rog exhaust comes in stainless steel and titanium, at the price shown on the product page in your currency. 304 stainless steel is tough, rounded in tone and the most popular choice; titanium is around 40% lighter for the same design, with a more metallic sound at high revs.
Do you need to replace the catalytic converter on the Ferrari F12berlinetta V12?
No. On the Ferrari F12berlinetta V12, the cat-back alone carries the valves and already transforms the sound. Replacing the front pipes is an option for going further: with a 200-cell sports catalytic converter for the road, 100-cell or decat for more radical use, with an ECU remap to turn it into power.
Will a Rog exhaust pass vehicle inspection on the Ferrari F12berlinetta V12?
With the cat-back only or the 200-cell sports catalytic converter, emissions control is retained: present the car with the valves closed. The 100-cell brings more sound and flow, and whether it is accepted at the emissions test depends on the car and local rules; the decat version is intended for track use.
How is the Rog exhaust fitted on the Ferrari F12berlinetta V12?
No welding or cutting, using clamps and gaskets. Allow two hours on average for a well-equipped mechanic. The exhaust is built for your VIN, which guarantees compatibility before it ships.
What price and lead time for a Rog exhaust on the Ferrari F12berlinetta V12?
The price depends on the configuration and is shown on the product page, in your currency. Allow 20 working days from order confirmation to delivery. Free delivery and a 3-year warranty.
Valved Exhaust System for Ferrari F12berlinetta V12 6.3 (2013-2016)
From 2 890 € · 3-year warranty
Configure my exhaustUnsure about your configuration? Write to us.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you drive and on your Ferrari F12berlinetta V12. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to push a sale: we help you choose, even if that means a cheaper option because it suits the way you drive. Write to us: we reply in writing, in English.
RogMotorsport is a French brand built on one conviction: with an exhaust system, the support matters as much as the product. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG E55 W211 / S211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...
- Toyota GR Supra A90 L6: the B58 takes centre stage, the exhaust system guide The GR Supra A90 revived a legendary line by pairing a short rear-wheel-drive chassis with the B58 3.0-litre...