Audi S3 8V: the complete exhaust system guide
The S3 8V has become the sensible used hot hatch par excellence: a reliable 300 hp and an exhaustively documented tuning base. The factory exhaust is the first link to replace: it is the one that holds back the character of the 2.0 TFSI the most. This guide sets out, for your Audi S3 8V, what each choice changes: material, front section, sound, valves and fitting.
Valved Exhaust System for Audi S3 8V 2.0 TFSI (2015-2020)From 2 490 € · free delivery · 20 working days
View
Your Rog exhaust for the Audi S3 8V
Price shown on the product page, in your currency
Configure my exhaustThe short answer.
- Vehicles
- Audi S3 8V 2.0 TFSI (2015-2020)
- Engine
- EA888 · 300 hp · 380 Nm
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted downpipe with 200 or 100 cells, or decat
- Valves
- Rog remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
Closely related versions have their own guide: Audi A3 8V 2.0 TFSI, Audi RS3 8V 2.5 TFSI, Audi S3 8Y 2.0 TFSI saloon, Audi A3 8Y 2.0 TFSI.
The TFSI 4-cylinder: more character than you might think
The 4-cylinder turbo in your S3 8V is a modern, solid engine, calibrated by Audi for efficiency and silence, not for emotion. The result: an anonymous factory sound. What few drivers know is that a TFSI responds very well to a well-engineered exhaust: by removing the unnecessary silencers and optimising the routing, you get a full, sporty and rewarding tone, with crisp crackles on the overrun.
The Rog exhaust delivers exactly that, and the controllable valves do the rest: character when you want it, total discretion when you need it.
What makes up the exhaust on your Audi S3 8V
An exhaust system is best understood in two parts. Here is what each one does, and what Rog replaces.
The cat-back is the complete exhaust system
It is everything you can see under the chassis of your Audi S3 8V, from the outlet of the front section to the tips: pipes, silencer, valves. This is where our research and development is focused, and it is what shapes the sound. On its own, it changes the character of the car.
The front section, where the catalytic converter sits
On your Audi S3 8V, that is the downpipe, the pipe leading from the turbo. It contains the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing this part is optional: it frees up the flow, and an ECU remap is what turns that into power.
The figures for your Audi S3 8V
On a modern car, an exhaust system first changes the voice, the breathing and the weight at the rear. Power, on the other hand, comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures.
Our exhaust systems work perfectly with or without an ECU remap. On your Audi S3 8V, however, we recommend having one done at an approved tuning centre: that is what lets the engine reach its full potential.
To be completely transparent: on a turbocharged 4-cylinder, the exhaust alone mainly improves breathing and sound. The significant power gains come with Stage 2, the exhaust plus an ECU remap at an approved tuning centre, and the TFSI handles them with ease. It is the combination we recommend to anyone who also wants to transform performance.
Configuring your exhaust, step by step
4 choices, in the same order as the product page configurator.
-
Step 1 of 4: Material: stainless steel or titanium
Titanium costs more than stainless steel; the price of each version is shown on the product page, in your currency.
304 stainless steel
- Weight
- Baseline
- Sound
- Full and rounded
The benchmark for high-end exhausts: tough, corrosion-proof, with a full, rounded sound. The choice of most of our customers.
Titanium
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
Around 40% lighter than stainless steel for the same design, with a more metallic sound that turns crystal-clear at high revs. Its finish ranges from brushed to blued tints.
Over time, both hold up: 304 stainless steel stands up to winter salt and damp, and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 4: Front section: downpipe and catalytic converter
Optional: the downpipe on your Audi S3 8V, with its catalytic converter. Sound intensity is rated on our scale of 0 to 10, valves open; the factory exhaust scores 3.
Cat-back only
Included
7/10Factory emissions control
The factory catalytic converter stays in place. The starting point and, for many of our customers, more than enough.
200-cell sports catalytic converter
8/10Road use and inspection
Emissions control is still very much there, and flow improves noticeably. The choice for everyday driving.
100-cell sports catalytic converter
9/10Inspection: depends on local rules
Half as many cells: flow comes close to a decat and the sound gains real aggression at high revs.
Decat
10/10Track use
No emissions control: maximum flow, raw sound, the sharpest revving.
Sound intensity, on a scale of 0 to 10
- 10/10Decat downpipe + Rog cat-back
- 9/10100-cell sports catalytic converter + Rog cat-back
- 8/10200-cell sports catalytic converter + Rog cat-back
- 7/10Rog cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports cat, it can come on with some engines: the sensor placed after the catalytic converter measures a different level of emissions control from the original. It is not a mechanical failure, but a warning light should never be masked or cleared without dealing with its cause: the right answer is a catalytic converter suited to the engine, with a map by a tuner who takes it into account. The decat version, for track use only, almost always triggers it. If this happens to you, write to us and we will point you in the right direction. Passing vehicle inspection with a sports exhaust.
-
Step 3 of 4: Valves: Rog remote or factory control
Two ways to control the valves on your Audi S3 8V.
Rog remote
A small control unit fits in the boot. Two buttons, open and closed: the valves respond at any moment, whatever the drive mode. Simple to fit, and we stay on hand throughout the installation.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
If your vehicle is fitted with factory valves, the exhaust keeps their existing control. The drive modes decide, just as they did from the factory, with no added electronics.
On the motorway, with the valves closed, the gases pass through the silencer, designed for cruising: no drone at a steady speed. You open up when you feel like it, not when the motorway decides for you. More about exhaust drone.
-
Step 4 of 4: Tips: the visual signature
Match the tips to the style of your Audi S3 8V, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.
- Stainless steel
- Black
- Carbon
- Blued titanium
Your choices carry over to the product page: only the finishes, your VIN and the cart remain.
The Rog sound signature on the 4-cylinder
Our optimised routing gives the TFSI a full, sporty tone, far richer than the thin factory sound, with crisp crackles on the overrun with the valves open. The goal is not volume at any cost but a rewarding, controlled sound that becomes completely discreet again with the valves closed.
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty.
From order to fitting
-
Configuration
You choose your exhaust and enter your VIN, found in box E of your registration document or at the base of the windscreen.
-
Check
We check compatibility with your VIN before manufacturing begins.
-
Manufacturing
Your exhaust is made to order, for your car.
-
Delivery
Free, insured to your door, tracked from dispatch.
-
Fitting
No welding or cutting: clamps and gaskets, around two hours on a lift.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of purchase
- Payment
- Card, PayPal or bank transfer
- Installation
- At the garage of your choice
What about the manufacturer's warranty on your Audi S3 8V? In Europe, a manufacturer cannot refuse warranty cover simply because a part from another brand has been fitted: it has to prove that the fault comes from that part. Our article on the manufacturer's warranty.
Our recommendations for your Audi S3 8V
-
Daily driving
- Stainless
- Cat-back only
- Rog remote
Your Audi S3 8V stays easy to live with, the factory emissions control is retained, and you open the valves whenever you choose.
View this configuration -
Fast road
- Titanium
- 200-cell downpipe
- ECU remap
More sound, more breathing, and a car you can still present at vehicle inspection.
View this configuration -
Track
- Titanium
- Decat downpipe
- Stage 2
The most extreme configuration, for track use only.
View this configuration
And if you are still unsure, that is perfectly normal: it is exactly why we answer every message.
Audi S3 8V: your questions
How much power does an exhaust system add to the Audi S3 8V?
From the factory, the Audi S3 8V produces 300 hp and 380 Nm. An exhaust system on its own mainly changes the sound, the breathing and the weight; power is gained with an ECU remap. With a Stage 2 build, the published figures reach 368 hp and 483 Nm.
Stainless steel or titanium: which material for the Audi S3 8V?
The Rog exhaust comes in stainless steel and titanium, at the price shown on the product page in your currency. 304 stainless steel is tough, rounded in tone and the most popular choice; titanium is around 40% lighter for the same design, with a more metallic sound at high revs.
Do you need to replace the catalytic converter on the Audi S3 8V?
No. On the Audi S3 8V, the cat-back alone carries the valves and already transforms the sound. Replacing the downpipe is an option for going further: with a 200-cell sports catalytic converter for the road, 100-cell or decat for more radical use, with an ECU remap to turn it into power.
Will a Rog exhaust pass vehicle inspection on the Audi S3 8V?
With the cat-back only or the 200-cell sports catalytic converter, emissions control is retained: present the car with the valves closed. The 100-cell brings more sound and flow, and whether it is accepted at the emissions test depends on the car and local rules; the decat version is intended for track use.
How is the Rog exhaust fitted to the Audi S3 8V?
No welding or cutting, using clamps and gaskets. Allow two hours on average for a well-equipped mechanic. The exhaust is built for your VIN, which guarantees compatibility before it ships.
What does a Rog exhaust for the Audi S3 8V cost, and how long does it take?
The price depends on the configuration and is shown on the product page, in your currency. Allow 20 working days from order confirmation to delivery. Free delivery and a 3-year warranty.
Valved Exhaust System for Audi S3 8V 2.0 TFSI (2015-2020)
From 2 490 € · 3-year warranty
Configure my exhaustUnsure about your configuration? Write to us.
Between stainless steel and titanium, between the cat-back only and the full system, the right choice depends on how you drive and on your Audi S3 8V. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to push a sale: we help you choose, even if that means a cheaper option because it suits the way you drive. Write to us: we reply in writing, in English.
RogMotorsport is a French brand built on one conviction: with an exhaust system, the support matters as much as the product. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG SLC43 R172 V6 biturbo: an open-air V6, the exhaust system guide The SLC43 is a compact roadster with a retractable hard top, which AMG equipped with a 3.0-litre twin-turbo...
- Mercedes-AMG E55 W211 / S211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...