Valved Exhaust System for Audi A6 / A6 Avant C7 3.0 TFSI V6 (2012-2018)
Configuration
Audi A6 / A6 Avant C7 3.0 TFSI V6 Valved Exhaust System (2012-2018)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat manifolds + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
The Audi A6 / A6 Avant C7 3.0 TFSI V6 exhaust in detail.
The A6 C7’s 3.0 TFSI is a 3.0-litre V6 boosted by a mechanical supercharger housed between its two cylinder banks. Driven by the engine, it delivers its boost without delay: torque arrives early and power is delivered in a linear way. The page shows three outputs between 2012 and 2018: 300 hp and 420 Nm, 310 hp and 420 Nm, then 333 hp and 440 Nm.
Unleashed, this V6 has a deep, even voice, with a metallic edge as it climbs through the revs. The factory exhaust piles up muffler volume and reduces everything to a muffled breath: you feel the shove, but your ears do not follow. With the valves open, the valved Rog cat-back adds body to the bass and every acceleration can be heard right up to the next gear; with the valves closed, the A6 becomes composed again.
The system is designed for the A6 C7 alone: the A7 of the same generation is not covered by this page. For fitting, no welding or cutting: clamps, gaskets and about two hours are enough, with four round tailpipes finishing the system. The valves follow the original control if there is one, otherwise the Rog remote, with its box in the trunk.
Offered under the name “Manifold”, this page’s option replaces the parts placed just after the engine, which carry the catalytic converters. For an A6 V6 that remains a road-going sedan, the 200-cell version is the right one, since it maintains emissions control on both cylinder banks; the 100-cell is accepted or not depending on the vehicle and your country’s rules, and the decat version is reserved for track use. The supercharger does not deliver a single extra horsepower without an ECU remap: the benefit is in the sound, with a little less weight. 304 stainless steel and titanium, around 40% lighter, are both offered, the latter in brushed, gold or purple.
Audi A6 / A6 Avant C7 3.0 TFSI V6 exhaust specifications.
| System type | Valved cat-back (valve exhaust), four round tips, built to your VIN |
|---|---|
| Vehicles and chassis code | Audi A6 C7 3.0 TFSI V6 sedan and Avant (A7 not covered) |
| Engine | 3.0 TFSI, supercharged V6, 300 to 333 hp and 420 to 440 Nm depending on the version |
| Years | 2012-2018 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Front section (option) | Front section with a 200-cell or 100-cell catalyst, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Audi A6 / A6 Avant C7 3.0 TFSI V6 exhaust.
Does the A6 C7 3.0 TFSI system fit an A7?
No: only the A6 with the 3.0 TFSI engine from the 2012 to 2018 model years is listed. If you have an A7, contact us with the VIN: we will tell you what exists for it.
With an ECU remap, what figures are published for the 333 hp A6 C7 V6?
Nothing to change in the ECU for the cat-back alone. Combined with the front section and a suitable map, it leads to the published Stage 2 figures of 441 hp and 546 Nm.
What should be planned for the vehicle inspection of a valved A6 C7 V6?
Come with the valves closed, and the V6 regains its factory discretion. Exhaust gas treatment does not change with the cat-back alone or a 200-cell front section. A 100-cell front section is accepted or not depending on the car and the rules in your country; in decat form, it reserves the A6 for track use.
Which material should you choose for an A6 C7 3.0 TFSI exhaust?
For a sedan that eats up the miles, 304 stainless steel is robust and round-sounding. Titanium takes around 40% off the system’s weight for the same design and sounds clearer at high revs.
Does the A6 Avant C7 3.0 TFSI take the same system as the sedan?
Yes. The A6 C7 sedan and Avant take the same Rog system: same chassis, same 3.0 TFSI V6, same clamp-and-gasket fitting. Your VIN is only used to confirm the version and model year before manufacturing.
Audi A6 / A6 Avant C7 3.0 TFSI V6: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear muffler and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the highway.
Audi A6 / A6 Avant C7 3.0 TFSI V6: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
Audi A6 / A6 Avant C7 V6: a supercharged V6 that speaks up, the exhaust system guide
The Audi A6 / A6 Avant C7 3.0 TFSI hides a 300 hp supercharged V6 under its hood, a responsive, always-willing engine that suits the temperament of this long-distance cruiser. Its factory exhaust, designed for silence on board, nevertheless filters...
In detail
Unsure about your configuration?
Talk to us before you order. We know your car.
Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Exhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ontario? Canada, province by province.
The sound you choose, and a quiet car when it matters: what you get with a Rog valved exhaust in...
Read the articleExhaust resonator delete: what it really changes.
Louder, rawer, same power, possible drone: what a resonator delete really changes, backed by published tests.
Read the articleResonator vs muffler: centre muffler, rear muffler, what's the difference?
Resonator vs muffler: the muffler lowers the volume, the resonator shapes the tone. What each part of an exhaust does,...
Read the articleExhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
An exhaust resonator rounds off your exhaust's voice while keeping it fully sporty. What it does, its effect on sound...
Read the articleValved exhaust price in 2026: how much should you budget?
How much does a valved sports exhaust cost? What drives the price depending on the car, what is included, and...
Read the articleCustom stainless steel exhaust: how we make it for your car.
A stainless steel or titanium exhaust made to order for your car, based on its VIN: what you configure, lead...
Read the articleNo article matches this search.
All articles