Guides

Chevrolet Corvette C8 Z06: the V8 rumble, the complete exhaust system guide

9 min read

Chevrolet Corvette C8 Z06: the V8 rumble, the complete exhaust system guide

The C8 Z06 carries the most powerful naturally aspirated flat-plane-crank V8 in history: 679 hp at 8,600 rpm, a racing-car scream that even Maranello has hailed. The European version is muffled: this historic engine deserves to be heard in full. For your Chevrolet Corvette Z06 C8, this guide sets out what each choice changes: material, sound, valves and fitting.

Written by ROG Motorsport · Updated

ROG valved exhaust system for Chevrolet Corvette Z06 C8

Your ROG exhaust for the Chevrolet Corvette Z06 C8

From €5,490 in stainless steel, €6,490 in titanium

Configure my exhaust
Vehicles
Chevrolet Corvette Z06 C8 5.5 (2023+)
Engine
679 hp · 624 Nm
Exhaust
Valved cat-back, built for your VIN
Material
304 stainless steel or titanium
Valves
ROG remote, or factory control if your vehicle has it
Lead time
20 working days from order confirmation to delivery
Warranty
3 years, parts and workmanship

Closely related versions have their own guide: Chevrolet Corvette Stingray C8 Z51, Chevrolet Corvette C7 6.2.

The Chevrolet small-block: quite literally the American legend

The V8 in your Corvette C8 Z06 descends from the Chevrolet small-block, the most produced engine in automotive history: overhead valves, generous displacement, torque everywhere and a rumble the whole world recognises in a second. European versions are heavily muffled to meet type approval: the real sound potential is far above what you hear from the factory.

The ROG exhaust unleashes the legend: the deep V8 rumble at idle, the thunderous climb through the revs, the bangs on the overrun. The valves keep the peace with your neighbours.

How the exhaust on your Chevrolet Corvette Z06 C8 is put together

Here is what the ROG exhaust replaces, and where the sound is shaped.

How the exhaust system is laid out From left to right: the engine, then the ROG cat-back with its valved silencer and tips.ROG cat-back: the complete exhaustEngine
Valves closed: the gases pass through the silencer chambers and the car stays composed.Valves open: the gases take the direct route and the engine speaks freely.Schematic only; the actual routing depends on the vehicle.

The cat-back is the complete exhaust system

It is everything you can see under your Chevrolet Corvette Z06 C8, all the way to the tips: pipes, silencer, valves. This is where our research and development is focused, and it is what shapes the sound. It fits without touching the engine or the ECU.

Your Chevrolet Corvette Z06 C8 in figures

On a modern car, an exhaust system first changes the voice, the breathing and the weight at the rear. Power, on the other hand, comes from an ECU remap.

Power

Factory679 hp

Torque

Factory624 Nm

Published manufacturer and Stage 2 figures, converted from US units.

Our exhaust systems work perfectly with or without an ECU remap. On your Chevrolet Corvette Z06 C8, however, we recommend one at an approved tuning centre: it is what lets the engine deliver its full potential.

Let's be honest: on a naturally aspirated American V8, the exhaust brings a moderate gain and a transformed character. An ECU remap at an approved tuning centre then fine-tunes the engine management. On the supercharged versions, Stage 2 unlocks a real step up, within the reliability zone of an engine built to take it.

Configuring your exhaust, step by step

3 choices, in the same order as the product page configurator.

  1. Step 1 of 3: Material: stainless steel or titanium

    For your Chevrolet Corvette Z06 C8, the exhaust costs €5,490 in stainless steel and €6,490 in titanium.

    304 stainless steel

    €5,490

    Weight
    Baseline
    Sound
    Full and rounded

    The benchmark for high-end exhausts: tough, corrosion-proof, with a full, rounded sound. The choice of most of our customers.

    Titanium

    €6,490

    Weight
    Around 40% lighter
    Sound
    Metallic, crystal-clear

    Around 40% lighter than stainless steel for the same design, with a more metallic sound that turns crystal-clear at high revs. Its finish ranges from brushed to blued tints.

    Over time, both hold up: 304 stainless steel stands up to winter salt and damp, and titanium does not rust. Stainless steel or titanium: what really changes.

  2. Step 2 of 3: Valves: ROG remote or factory control

    Two ways to control the valves on your Chevrolet Corvette Z06 C8.

    ROG remote

    ROG remote for opening and closing the valves

    A small control unit fits in the boot. Two buttons, open and closed: the valves respond at any moment, whatever the drive mode. Simple to fit, and we stay on hand throughout the installation.

    Factory control

    • Only for vehicles fitted with factory valves
    • Controlled by the drive modes

    If your vehicle is fitted with factory valves, the exhaust keeps their existing control. The drive modes decide, just as they did from the factory, with no added electronics.

    On the motorway, with the valves closed, the gases pass through the silencer, designed for cruising: no drone at a steady speed. You open up when you feel like it, not when the motorway decides for you. More about exhaust drone.

  3. Step 3 of 3: Tips: the visual signature

    Match the tips to the style of your Chevrolet Corvette Z06 C8, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.

    • Stainless steel
    • Black
    • Carbon
    • Blued titanium
    Exhaust tips for Chevrolet Corvette Z06 C8

The ROG sound signature on the Chevrolet V8

Our exhaust unleashes the legendary small-block rumble: deep and cavernous at idle, thunderous under load, with bangs that crack on the overrun with the valves open. With the valves closed, the truce with the neighbours is signed. America, your way.

Valves open and valves closed: the gas path through the ROG silencer
Valves open, valves closed: the path the gases take through the silencer.

From order to fitting

  1. Configuration

    You choose your exhaust and enter your VIN, found in box E of your registration document or at the base of the windscreen.

  2. Check

    We check compatibility with your VIN before manufacturing begins.

  3. Manufacturing

    Your exhaust is made to order, for your car.

  4. Delivery

    Free, insured to your door, tracked from dispatch.

  5. Fitting

    No welding or cutting: clamps and gaskets, around two hours on a lift.

20 working days from order confirmation to delivery

Warranty
3 years, parts and workmanship, from the date of delivery
Payment
In instalments with Klarna
Installation
At the garage of your choice

What about the manufacturer's warranty on your Chevrolet Corvette Z06 C8? In Europe, a manufacturer cannot refuse warranty cover simply because a part from another brand has been fitted: it has to prove that the fault comes from that part. Our article on the manufacturer's warranty.

Our recommendations for your Chevrolet Corvette Z06 C8

And if you are still unsure, that is perfectly normal: it is exactly why we answer the phone.

Chevrolet Corvette Z06 C8: your questions

How much power does an exhaust add on the Chevrolet Corvette Z06 C8?

As standard, the Chevrolet Corvette Z06 C8 produces 679 hp and 624 Nm. An exhaust system on its own mainly changes the sound, the breathing and the weight; power is gained with an ECU remap.

Stainless steel or titanium: which material for the Chevrolet Corvette Z06 C8?

For the Chevrolet Corvette Z06 C8, the ROG exhaust costs €5,490 in stainless steel and €6,490 in titanium. 304 stainless steel is tough, rounded in tone and the most popular choice; titanium is around 40% lighter for the same design, with a more metallic sound at high revs.

Is the ROG exhaust loud all the time on the Chevrolet Corvette Z06 C8?

No. With the valves closed, the gases pass through the silencer and the sound stays comfortable. With the valves open, the engine speaks freely. You switch from one to the other at any moment, with the ROG remote or the factory control if your vehicle has it.

Will a ROG exhaust pass vehicle inspection on the Chevrolet Corvette Z06 C8?

The ROG exhaust replaces the rear part of the exhaust, without touching the engine or the ECU. Present the car with the valves closed: it is the most discreet setting.

How is the ROG exhaust fitted on the Chevrolet Corvette Z06 C8?

No welding or cutting, using clamps and gaskets. Allow two hours on average for a well-equipped mechanic. The exhaust is built for your VIN, which guarantees compatibility before it ships.

What price and lead time for a ROG exhaust on the Chevrolet Corvette Z06 C8?

From €5,490 to €6,490 depending on the configuration. Allow 20 working days from order confirmation to delivery. Free delivery and a 3-year warranty.

Unsure about your configuration? Give us a call.

Stainless steel or titanium, ROG remote or factory control: the right choice depends on how you use your Chevrolet Corvette Z06 C8. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to sell to you over the phone: we help you choose, even if that means a cheaper option because it suits the way you drive.

RogMotorsport is a French brand built on one conviction: with an exhaust system, the support matters as much as the product. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.

Further reading