Audi RS4 B8: bringing out the naturally aspirated V8, the complete exhaust system guide
RogMotorsport expert guide
The RS4 B8 is one of the last naturally aspirated V8 family cars in history: 450 hp at 8,250 rpm in an estate. Its market value has clearly caught on. On this engine, the exhaust decides everything: the car is good as standard, and it becomes unforgettable with an exhaust that lets the 4.2 sing. This guide explains everything you need to know before choosing your configuration: cat-back only or sport catalytic converter, the French MOT, the engine warning light, stainless steel or titanium, and the valve system. By the end, you will know exactly which exhaust system suits the way you drive.
The naturally aspirated 4.2 FSI: a high-revving V8 that deserves to be heard
The 4.2 FSI in your RS4 B8 belongs to an endangered species: the high-revving naturally aspirated V8, which spins past 8,000 rpm with a throttle response that modern turbos will never match. Its natural sound is exceptional, but the heavy, filtered factory exhaust holds part of it back, precisely in the midrange where the V8 builds its crescendo.
On a naturally aspirated engine, freeing up the exhaust directly transforms the experience: the crescendo becomes continuous from idle to the redline. That is exactly what the ROG exhaust delivers, with valves to keep your daily journeys peaceful.
The figures: what the exhaust system really delivers
At ROG, we always look for the best. That is why we always recommend an ECU remap at an approved tuning centre after installation. Our systems fit perfectly with or without, but it is with a full remap that your engine will express all of its potential.
| Factory | ROG system alone | Stage 2 + Remap | |
|---|---|---|---|
| Power | 450 hp | 466 hp (+16 hp) | 545 hp (+95 hp) |
| Torque | 430 Nm | 444 Nm (+14 Nm) | 550 Nm (+120 Nm) |
Gains from the ROG system alone without a remap. Stage 2 with a full remap.
Let's be honest, it is our trademark: on a naturally aspirated engine, 150 hp gains simply do not exist. The 4.2 gains breathing with the exhaust, then precision in engine management with an ECU remap. What the figures do not show is what matters most: the response, the pull through the revs, and a transfigured sound. You do not tune a naturally aspirated V8 for lap times, but for the experience.
Cat-back only or sport catalytic converter: building your configuration
Let us start with a point many websites keep quiet about: you do not have to touch the catalytic converter. Our full post-cat exhaust system, the cat-back, is already a major transformation. It houses the entire valve system and removes a large part of the factory silencers. In sound, character and breathing, the gain is immediate, with the best results for the money. It is the ideal starting point and, for many of our customers, it is more than enough.
Replacing the catalytic converter is then for those who want the ultimate configuration: even more flow, even more sound. Here is exactly what each option means for your RS4 B8.
200-cell sport catalytic converter
Passes the French MOT. The 200-cell converter cleans the exhaust enough to meet the emissions limits of the French MOT (contrôle technique), while delivering far more flow than the factory catalytic converter. No compromise on legality in France, and a real gain in breathing and sound. It is our recommendation for a car used every day.
100-cell sport catalytic converter
French MOT pass not guaranteed. With half as many cells, flow comes as close as possible to a decat and the sound gains real aggression, especially at high revs. Emissions control is still there but reduced: passing the French MOT (contrôle technique) is not guaranteed.
Decat
The decat pipe removes all emissions control: maximum flow, raw sound and the sharpest revving. It is the most extreme configuration we offer. To be completely transparent: under normal circumstances, a decat does not pass the emissions test of the French MOT (contrôle technique). The choice is yours, made with full knowledge of your situation and how you use the car. If in doubt, call us and we will talk it through.
Sound level, on a scale of 0 to 10
To give you a concrete idea, here is how the configurations rank on your RS4 B8, with the valves open:
And remember: with the valves closed, every one of these configurations becomes discreet again. That is the whole point of the ROG valve system.
What about the engine warning light?
A question we always get, answered with figures. With a sport catalytic converter (100 or 200 cells), an engine warning light appears in around 15% of cases. A warning light is therefore very rare, but the risk is not zero. With a decat, the warning light is more common, as the ECU detects the missing emissions control. Either way, the fix is simple: a diagnostic tool session or an ECU remap will clear it. And if it happens to you, get in touch and we will help you through it.
Stainless steel or titanium: what difference does it make for you?
Stainless steel (304 grade): the benchmark for high-end exhausts. Tough, durable and corrosion-proof, with a full, rounded sound. It offers the best value for money and is the choice of most of our customers.
Titanium: around 40% lighter than stainless steel, with a more metallic sound signature that turns crisper at high revs. It is also an aesthetic choice: titanium comes in several shades, from natural titanium to blued, heat-burnt finishes. It is the material of supercars and motorsport. On an RS4 B8, it brings an exclusive character that stainless steel cannot offer.
The ROG sound signature on the 4.2 FSI
The naturally aspirated 4.2 builds its voice through the revs: raspy and present in the midrange, howling beyond 7,000 rpm. Our exhaust reduces back pressure and removes the unnecessary filters to free that crescendo, with the mechanical fury only the great naturally aspirated engines possess. With the valves closed, the car stays usable every day without fatigue.
The valve system: how it works, and why it changes everything
The principle is simple and mechanical. With the valves open, the exhaust gases run straight through: a direct path, no restriction, maximum sound and flow. With the valves closed, the gases are forced through the rear silencer: the volume drops instantly and the car becomes discreet again. Two personalities in one exhaust system, and you are the one who decides.
You have two ways to control these valves, whichever you prefer.
OEM valves: the exhaust comes with mounting points ready to refit your factory actuators. Your RS4 B8 keeps all of its factory management: drive modes and automatic opening according to the manufacturer's mapping. Zero added electronics, completely seamless integration.
ROG remote-controlled valve system: new motorised valves, independent of the factory engine management. A small control unit fits in the boot (very simple installation, full guide shipped with the exhaust), and a remote gives you two buttons: open and closed. You decide, at any moment, whatever the drive mode. Discreet in your street at 7h00 in the morning, spectacular on a mountain road at the weekend.
The tips: the visual signature
Final step of the configuration: the exhaust tips. A choice of shapes, diameters and finishes to match the exhaust exit to the style of your RS4 B8, whether understated or bold. Something specific in mind, a particular finish? Email us a photo or a description and we will work out together what can be done.
ROG semi-bespoke: why we ask for your VIN
Every exhaust system is assembled for your exact specification. That is why, before ordering, you enter your vehicle's exact details (year, model, engine, chassis) along with your 17-character VIN, shown in box E of your vehicle registration certificate. This is not a formality: it is what allows us to guarantee a perfect fit, with no nasty surprises during installation. Installation is plug and play, with no modification to the vehicle.
We are upfront about lead times: allow 7 days to design your exhaust system, then 10 to 15 days for free delivery, so 2 to 3 weeks on average between your order and delivery. Every exhaust system comes with a 3-year warranty.
A French brand, close to its customers
RogMotorsport is a French brand, and we built it around one conviction: with a product like an exhaust system, the support matters as much as the product itself. In practice, this means you can reach us by phone on 07 56 95 95 39 or by email at contact@rogmotorsport.com, before, during and after your order.
Before ordering: torn between stainless steel and titanium, between 200 cells and cat-back only, or want to know what best suits the way you drive? Call us, we will take the time. Do you have a specific request, particular tips, a special finish, or a question about your exact configuration? Write to us and we will give you a straight answer. After your order: tracking, fitting advice and support whenever needed, our after-sales service is extremely responsive. More than 500 exhaust systems fitted and a 4.9-star rating: that is no accident, it is this close relationship that makes the difference.
Configure my exhaust for the RS4 B8 (from €2,655)
In summary: our recommendations for the RS4 B8
Daily driving, open road: cat-back exhaust or 200-cell catalytic converter, ROG remote-controlled valves, the perfect sleeper, discreet until you decide otherwise. No worries at the French MOT.
Enthusiast use: titanium, 100-cell catalytic converter and a Stage 2 ECU remap to unlock the full potential.
Ultimate configuration: decat, full Stage 2. The absolute maximum in flow and sound.
And if you are still unsure, that is perfectly normal: it is exactly why we answer the phone.
Frequently asked questions
AUDI RS4 B8 V8 (2012-2015): your questions
What power gain does the ROG exhaust give on an AUDI RS4 B8 V8 (2012-2015)?
The AUDI RS4 B8 V8 produces 450 hp as standard. With the ROG exhaust alone, without an ECU remap, it rises to 466 hp, a gain of +16 hp, and torque goes from 430 Nm to 444 Nm (+14 Nm). With a full Stage 2 ECU remap, the package reaches 545 hp (+95 hp) and 550 Nm (+120 Nm).
How much weight do you save on an AUDI RS4 B8 V8 (2012-2015)?
The factory exhaust on the AUDI RS4 B8 V8 weighs around 22 kg. The ROG stainless steel exhaust weighs around 14 kg, which is 8 kg less. In titanium, it drops to around 11 kg, which is 11 kg less than the factory system.
Do I need an ECU remap after fitting?
It is not compulsory: the ROG exhaust system works with or without an ECU remap. ROG does, however, recommend one at an approved tuning centre, because a full ECU remap is what unlocks the engine's full potential: the difference is 466 hp without, against 545 hp with.
How do the valves work, and is it loud all the time?
No. The valve system controls how the exhaust opens: with the valves closed, the gases flow through the silenced path and the noise level stays within regulatory limits; with the valves open, they take the straight-through path and the exhaust sound comes through in full. You choose at any moment, which means you can use the AUDI RS4 B8 V8 every day without putting up with the volume all the time.
Which configurations are available, and which one should you choose?
The ROG exhaust system is semi-bespoke: you choose the material (stainless steel or titanium), the manifold type (200 or 100-cell sport catalytic converter, or decat), the layout (standard, Equal Length or Z Pipe) and the tip finish. Every combination changes the sound and the character of the car. The guide above details what each element changes on the AUDI RS4 B8 V8.
How much does a ROG exhaust cost for an AUDI RS4 B8 V8 (2012-2015), and how long does it take?
For the AUDI RS4 B8 V8, prices range from €2,655 to €4,210 depending on the chosen configuration (material, manifold, layout, tips). As every exhaust system is built for your vehicle, allow around three weeks between order and dispatch: one week of design, two weeks of manufacturing.
Read next
- Mercedes-AMG SLC43 R172 V6 biturbo : un V6 à ciel ouvert, le guide de la ligne d'échappement Le SLC43 est un roadster compact à toit rigide escamotable, qu'AMG a doté d'un V6 biturbo de 3,0...
- Mercedes-AMG E55 W211 V8 Kompressor : le loup en costume, le guide de la ligne d'échappement Avec la E55 W211, AMG a glissé un V8 à compresseur de 476 ch et 700 Nm dans...
- Mercedes-AMG CLS53 C257 : le retour du six en ligne, le guide de la ligne d'échappement Coupé à quatre portes au dessin fluide, la CLS53 C257 profite du retour chez Mercedes d'une architecture longtemps...