Guides Mercedes-AMG GT 43 / 63 X290
Mercedes AMG GT 63 X290: the unfiltered V8 M177, the complete exhaust system guide
A 900 Nm four-door that goes from 0 to 100 km/h in 3.2 seconds: the GT 63 S 4-Door is a family car in silhouette only. Its M177 V8 is the same hand-built engine as in the AMG coupés, and it deserves better than the restraint its factory exhaust imposes. Here you will find everything that matters before configuring the exhaust for your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo: catalytic converter, material, valves, tips and vehicle inspection.
Your valved exhaust for Mercedes-AMG GT63 / GT63 S X290 is configured from your VIN, and the Mercedes-AMG GT 43 / 63 X290 Valved Exhaust page brings together every system we make for this generation.
Valved Exhaust System for Mercedes-AMG GT63 / GT63 S X290 4.0 V8 biturbo (2019-2025)From 4 290 € · free delivery · 20 working days
View
Your Rog exhaust for the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo
Price shown on the product page, in your currency
Configure my exhaustThe short answer.
- Vehicles
- Mercedes-AMG GT63 / GT63 S X290 4.0 V8 biturbo (2019-2025)
- Engine
- M177 · 585 to 639 hp · 800 to 900 Nm, depending on the version
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted downpipe with 200 or 100 cells, or decat
- Valves
- Rog remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
Closely related versions have their own guide: Mercedes-AMG GT43 X290 3.0 inline-six turbo, Mercedes-AMG GT63 C192 4.0 V8 biturbo, Mercedes-AMG G63 W463A 4.0 V8 biturbo, Mercedes-AMG GLC63 / GLC63 S X253 4.0 V8 biturbo.
The M177 4.0 twin-turbo V8: a four-door hiding a sports car
The M177 in your AMG GT 4-Door X290 is a 4.0-litre twin-turbo V8, with the turbos housed inside the V. This layout shortens the gas path between the cylinders and the turbines, and gives the engine the instant response that always surprises in a car of this size. It is hand-built in Affalterbach according to the ‘One Man, One Engine’ principle. The transmission does the rest: the AMG SPEEDSHIFT MCT 9G gearbox, which replaces the torque converter with a multi-plate clutch for crisper shifts, and 4MATIC+ all-wheel drive with variable torque split.
In GT 63 S form, the package is rated at 900 Nm, 3.2 seconds from 0 to 100 km/h and 315 km/h; the figures in the table below take this version as their reference. And yet, to the ear, the car remains almost polite: on recent model years, the particulate filter and oversized silencers smooth everything out. That is exactly what the Rog exhaust system corrects, without touching the factory electronics.
What makes up the exhaust on your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo
An exhaust system is best understood in two parts. Here is what each one does, and what Rog replaces.
The cat-back is the complete exhaust system
It is everything you can see under your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo, from the outlet of the front section to the tips: pipes, silencer, valves. This is the part where most of our research and development goes: it is what shapes the sound, and it is enough on its own to transform the car.
The front section, where the catalytic converter sits
On your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo, it is the downpipe, the pipe leading from the turbo. It contains the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing it is optional: it frees up the flow, and it is the ECU remap that turns that into horsepower.
Your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo in figures
An exhaust system is judged first by ear and on the scales. The extra horsepower comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures. Factory figures vary by version; Stage 2 figures published for the 639 hp version.
The Rog exhaust works with or without an ECU remap. To get the full potential out of your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo, we advise taking it to an approved tuning centre afterwards.
To be completely transparent: the exhaust alone brings better breathing and sound, while Stage 2 brings the transformation. The AMG V8 is known among tuners for handling power comfortably: with the Rog exhaust and an ECU remap at an approved tuning centre, the figures above stay within the working range of an engine designed with headroom.
Configuring your exhaust, step by step
3 choices, in the same order as the product page configurator.
-
Step 1 of 3: Material: stainless steel or titanium
Titanium costs more than stainless steel; the price of each version is shown on the product page, in your currency.
304 stainless steel
- Weight
- Baseline
- Sound
- Full and rounded
The safe bet: strong, corrosion-proof, with a full, rounded sound. The best value for money.
Titanium
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
It makes the exhaust around 40% lighter for the same design. Its note is more metallic and clearer higher up the rev range, and its finish ranges from brushed to blued.
No worries on durability: 304 stainless steel shrugs off winter road salt and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 3: Front section: downpipe and catalytic converter
Optional: the downpipe on your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo, with its catalytic converter. Each option is placed on our sound scale of 0 to 10, valves open, with the factory exhaust at 3.
Cat-back only
Included
7/10Factory emissions control
The factory front section stays in place. It is already a complete transformation, and the choice of many of our customers.
200-cell sports catalytic converter
8/10Road use and inspection
More flow, emissions control retained: the right option for road use.
100-cell sports catalytic converter
9/10Inspection: depends on local rules
More open than the 200-cell: the sound hardens at high revs and emissions control is reduced.
Decat
10/10Track use
Flow with no filter at all: the rawest sound and the sharpest response.
Sound intensity, on a scale of 0 to 10
- 10/10Decat downpipe + Rog cat-back
- 9/10100-cell sports catalytic converter + Rog cat-back
- 8/10200-cell sports catalytic converter + Rog cat-back
- 7/10Rog cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports cat, it can come on with some engines: the sensor placed after the catalytic converter measures a different level of emissions control from the original. It is not a mechanical failure, but a warning light should never be masked or cleared without dealing with its cause: the right answer is a catalytic converter suited to the engine, with a map by a tuner who takes it into account. The decat version, for track use only, almost always triggers it. If this happens to you, write to us and we will point you in the right direction. Passing vehicle inspection with a sports exhaust.
-
Step 3 of 3: Valves: Rog remote or factory control
Two ways to control the valves on your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo.
Rog remote
A discreet control unit in the boot and a two-button remote: you open and close whenever you like, independently of the drive modes. For fitting, we support you by email.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
For vehicles fitted with factory valves: the exhaust connects to their control and the drive modes stay in charge, with no extra control unit.
At 130 km/h, many sports exhausts drone. Here, with the valves closed, the exhaust flows through the silencer and stays composed when cruising; open, it makes itself heard when you choose. More about exhaust drone.
Your choices carry over to the product page: only the finishes, your VIN and the cart remain.
The Rog sound signature on the AMG V8
The AMG V8 has a sound identity recognised worldwide: a deep, rolling thunder punctuated by sharp bangs on the overrun. On a four-door, the contrast is even more spectacular: nothing in the silhouette prepares you for what comes out of the back. Our exhaust removes what stifles it and restores that signature in full with the valves open. Valves closed, the X290 goes back to being the long-distance grand touring saloon it also is.
From order to fitting
-
Configuration
You configure the exhaust and enter the VIN from box E of your registration document or from the base of the windscreen.
-
Check
Your VIN is checked before any manufacturing begins.
-
Manufacturing
The exhaust is produced to order, for your vehicle.
-
Delivery
Free, insured parcel, tracking number from dispatch.
-
Fitting
Around two hours in the workshop, with no welding or cutting.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of purchase
- Payment
- Card, PayPal or bank transfer
- Installation
- At the garage of your choice
Is your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo still under the manufacturer's warranty? In Europe, the manufacturer cannot refuse cover simply because a part from another brand has been fitted: it is up to the manufacturer to prove that the fault comes from that part. Our article on the manufacturer's warranty.
Our recommendations for your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo
-
Daily driving
- Stainless
- Cat-back only
- Rog remote
Your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo stays easy to live with, the factory emissions control is retained, and you open the valves whenever you decide.
View this configuration -
Fast road
- Titanium
- 200-cell downpipe
- ECU remap
The best of both worlds: character and breathing, with emissions control retained.
View this configuration -
Track
- Titanium
- Decat downpipe
- Stage 2
The most extreme configuration, for track use only.
View this configuration
Every Mercedes-AMG GT63 / GT63 S X290 V8 biturbo has its own story and its own use: if none of these profiles sounds like you, let's talk.
Mercedes-AMG GT63 / GT63 S X290 V8 biturbo: your questions
How much power does an exhaust add on the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
As standard, the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo produces 585 to 639 hp and 800 to 900 Nm, depending on the version. The exhaust alone acts first on sound, breathing and weight; the extra horsepower comes from an ECU remap. With a Stage 2 build, the published figures for the 639 hp version reach 820 hp and 1100 Nm.
Stainless steel or titanium: which material for the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
The Rog exhaust comes in stainless steel and titanium, at the price shown on the product page in your currency. Stainless steel is the safe bet, with a full sound; titanium makes the exhaust around 40% lighter and gives a more metallic note higher up the rev range.
Do you need to replace the catalytic converter on the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
It is not compulsory. The cat-back alone is enough to change the character of the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo. Replacing the downpipe is how you go further, together with an ECU remap: 200 cells for the road, 100 cells or decat for more radical use.
Will a Rog exhaust pass vehicle inspection on the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
The cat-back only and the 200-cell converter both retain emissions control: present the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo with the valves closed. With the 100-cell, acceptance at the emissions test depends on the car and local rules; the decat is intended for track use.
How is the Rog exhaust fitted on the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
With clamps and gaskets, no welding or cutting: around two hours in the workshop for a well-equipped mechanic. The exhaust is built to the VIN of your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo.
What price and lead time for a Rog exhaust on the Mercedes-AMG GT63 / GT63 S X290 V8 biturbo?
The price depends on the configuration and is shown on the product page, in your currency. Allow 20 working days from order confirmation to delivery. Delivery is free and the exhaust comes with a 3-year warranty.
Valved Exhaust System for Mercedes-AMG GT63 / GT63 S X290 4.0 V8 biturbo (2019-2025)
From 4 290 € · 3-year warranty
Configure my exhaustUnsure about your configuration? Write to us.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you drive and on your Mercedes-AMG GT63 / GT63 S X290 V8 biturbo. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to push a sale: we help you choose, even if that means a cheaper option because it suits the way you drive. Write to us: we reply in writing, in English.
Rog is a French brand, and the way we work comes down to one idea: an exhaust system should be sold with advice, not just a product page. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
- All Mercedes-AMG exhaust systems
- Mercedes-AMG GT43 X290 3.0 inline-six turbo
- Mercedes-AMG GT63 C192 4.0 V8 biturbo
- Mercedes-AMG G63 W463A 4.0 V8 biturbo
- Stage 2: the role of the downpipe
- How to pass vehicle inspection with a modified exhaust
- Pop & Bang: how it works, and is it risky?
- The 28 brands we cover
Read next
- Mercedes-AMG E55 W211 / S211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...
- Toyota GR Supra A90 L6: the B58 takes centre stage, the exhaust system guide The GR Supra A90 revived a legendary line by pairing a short rear-wheel-drive chassis with the B58 3.0-litre...