






Valved Exhaust System for Audi R8 / R8 Spyder 4S 5.2 V10 (2020-2024)
Configuration
Audi R8 4S Valved Exhaust, R8 Spyder 5.2 V10 (2020-2024)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat manifolds + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Audi R8 / R8 Spyder 4S 5.2 V10 exhaust in detail.
R8 4S exhaust system, built from your VIN. This R8 4S valved exhaust is made to order, with the sound you choose, in stainless steel or titanium. The facelifted R8 4S carries over the naturally aspirated V10 5.2 FSI, ten cylinders that owe their voice to nothing but themselves. Depending on the version, it gives 570 hp and 560 Nm, or 620 hp and 580 Nm in Performance form. This system is designed for the 2020 to 2024 model years; the first-generation V8 and V10 R8 42 have their own system.
Deep below 4,000 rpm, ever higher-pitched up to the red line: the V10 builds its voice at high revs, and the factory exhaust tempers its upper harmonics. With the valves open, our valved cat-back lets them speak; with the valves closed, the R8 becomes a discreet GT, capable of a long journey without fatigue.
On this mid-engined car, the compact exhaust includes small silencers and the valves; it is attached with clamps and gaskets, without welding, in about two hours, and joins the outlets specific to the R8’s diffuser. With or without factory valves, the R8 4S can be controlled: by its own control where it exists, by the Rog remote otherwise.
The “Manifold” option replaces the five-outlet manifolds on each bank of the V10, catalytic converters included. Anyone driving their R8 4S on the open road will stick with the 200-cell, emissions control maintained; the 100-cell is accepted or not depending on the vehicle and your country’s rules, and the decat version gives the freest sound. The power gain on a naturally aspirated engine remains modest, 3 to 8% with an ECU remap. Two materials are offered: 304 stainless steel and titanium, around 40% lighter, available in three finishes.
The sound, configuration by configuration
On our scale of 0 to 10, the Rog system alone, valves open, sits around 7: the configuration to start with. Beyond 7, the Manifold option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10.
Made from your VIN, fitted by your garage
Every system is made from your VIN and checked before production: it fits your Audi R8 4S perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.
Audi R8 / R8 Spyder 4S 5.2 V10 exhaust specifications.
| System type | Valved cat-back (valve exhaust), compact layout, diffuser exits |
|---|---|
| Vehicle and chassis code | Audi R8 4S facelift 5.2 V10 and V10 Performance, coupé and Spyder |
| Engine | 5.2 FSI, naturally aspirated V10, 570 to 620 hp and 560 to 580 Nm depending on the version |
| Years | 2020-2024 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if fitted, otherwise the Rog remote |
| Manifold (option) | Manifolds with 200-cell or 100-cell catalytic converters, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days from confirmation to delivery, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Audi R8 / R8 Spyder 4S 5.2 V10 exhaust.
My R8 4S dates from 2017, before the facelift: can I order?
This system is designed for the facelifted R8 4S from 2020 to 2024, not for earlier model years. Send us your VIN: we check what exists for your car before any order.
What gain can you expect on the R8 4S V10 Performance?
On this naturally aspirated V10, the manifolds and an ECU remap bring a real but modest gain of 3 to 8%. With no reliable figure for this generation, no Stage 2 number is published here.
What should be done before presenting a modified R8 4S at vehicle inspection?
With the valves closed, the V10 returns to its stock level. On emissions, the cat-back alone or the 200-cell manifolds change nothing. 100-cell manifolds are accepted or not depending on the vehicle and your country’s rules.
Is the R8 4S Spyder compatible?
Yes. The R8 4S coupé and Spyder take the same Rog system: same chassis, same V10 5.2, same clamp-and-gasket fitting. Your VIN is only used to confirm the version and model year before manufacturing.
Audi R8 / R8 Spyder 4S 5.2 V10: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
Audi R8 4S: factory valves or Rog valves?
If your Audi R8 4S has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.
Rog expert guide
Audi R8 / R8 Spyder 4S exhaust: which one to choose?
The R8 4S is the last mass-produced naturally aspirated supercar: a 620 hp V10 that screams to 8,700 rpm, without a single turbo. When production ended, an era came to a close. Owning an R8 means owning this engine: our...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in Australia.
Valved exhausts and Australian checks
For a pink slip, roadworthy or safety certificate, the inspector checks the exhaust for leaks and secure mounting: a Rog system bolts onto the original mounting points. The cat-back keeps your factory cat, sports cats follow your state's rules, catless is track only, and your state decides.
On the road
Around town, valves closed keep your car very close to stock, and you open them whenever you like, on an open road or at the track.
Your documents
Each system is built from the VIN on your rego papers, and we send its technical documentation free on request, for your registration authority or your insurer.
Your insurance
Many policies treat an exhaust change as a modification to declare, so let your insurer know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Valved exhaust comparison for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleFrom order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleValved exhaust comparison for the Mercedes A45 W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleValved exhaust comparison for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Australia? The noise test explained.
The sound you choose, and a quiet car day to day: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
