












Valved Exhaust System for BMW M850i G14 / G15 / G16 4.4TT (2020-2026)
Configuration
BMW M850i G14 Valved Exhaust, G15 / G16 4.4TT (2020-2026)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity ratings are not yet available for this model.
The BMW M850i G14 / G15 / G16 exhaust in detail.
M850i G14 exhaust system, built from your VIN. This M850i G14 valved exhaust is made to order, with the sound you choose, in stainless steel or titanium. G14 convertible, G15 coupé or G16 Gran Coupé: the M850i is the rational grand tourer of the 8 Series, without the price or the radical edge of the M8. Its 4.4-litre twin-turbo N63, with the turbos in the vee, delivers 530 hp and a massive 750 Nm, with instant response. The 2020 to 2026 model years are the ones our system covers, with the six-cylinder 840i and the M8 having their own systems.
The N63’s natural sound is among the finest in the BMW range, deep and pulsing, but between the particulate filter and silencers sized for total soundproofing, almost nothing of it is left outside. Open the valves on the Rog cat-back: the V8 finally rumbles, with a full, authoritative climb; close them, and the 8 Series remains the hushed GT for early-morning departures. Two cars in one.
On all three body styles, fitting is identical: no welding, clamps and gaskets, about two hours, for an exhaust made to your VIN and controlled by the factory control or the Rog remote.
The “Downpipe” option is the N63’s downpipe, with its catalytic converter; on its own, it adds voice and removes a little weight, with horsepower coming from an ECU remap. With 530 hp already on tap, most M850is stay with 200 cells, which preserves emissions control; the 100-cell is accepted or not depending on the car and the rules in your country, and the decat version gives the freest sound. Titanium or 304 stainless steel: the former removes around 40% of the mass, the latter gives a thicker bass.
The sound, configuration by configuration
On a scale of 0 to 10, a stock BMW M850i G14 / G15 / G16 sits around 3. With the Rog system alone and the valves open, it goes to around 7: already night and day, and the configuration to start with. Beyond 7, the Downpipe option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10. If your BMW M850i G14 / G15 / G16 has a particulate filter (GPF/OPF), it softens the sound a little; the difference is still clear with the system alone.
Made from your VIN, fitted by your garage
Every system is made from your VIN and checked before production: it fits your BMW M850i G14 / G15 / G16 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.
BMW M850i G14 / G15 / G16 4.4TT exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicles and chassis codes | BMW M850i G14 convertible, G15 coupé, G16 Gran Coupé |
| Engine | N63, 4.4-litre twin-turbo V8, 530 hp and 750 Nm |
| Years | 2020-2026 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Downpipe (option) | Downpipe with a 200-cell or 100-cell catalyst, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the BMW M850i G14 / G15 / G16 4.4TT exhaust.
Are the very first M850i models, from 2018 or 2019, compatible?
Our system starts in 2020; for those early cars, provide the VIN and we will reply before building.
Can the M850i match an M8 at Stage 2?
Almost: the N63 is held back from the factory to preserve the hierarchy, and the published figures reach 700 hp and 980 Nm with the downpipe and an ECU remap at a tuner; the cat-back alone requires no map.
Vehicle inspection: how should a modified M850i be presented?
Like a standard GT: engine idling, valves closed, factory catalytic converters or 200-cell downpipe, and the N63 fades into the background; the 100-cell is accepted or not depending on the vehicle and your country’s rules.
M850i convertible, coupé or Gran Coupé: a system for each?
Just one, common to the G14, G15 and G16; the VIN requested when ordering is used to adjust the mountings specific to your body style.
Does titanium change the sound of the M850i’s V8?
A little: for the same design, it weighs around 40% less and gives a brighter note at high revs, whereas 304 stainless steel keeps a thicker bass.
BMW M850i G14 / G15 / G16 4.4TT: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
BMW M850i G14 / G15 / G16 4.4TT: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
BMW M850i G14 / G15 / G16: factory valves or Rog valves?
If your BMW M850i G14 / G15 / G16 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.
Rog expert guide
BMW M850i G14 / G15 / G16 exhaust: which one to choose?
For a BMW M850i, whether convertible, coupé or Gran Coupé, the right exhaust wakes the twin-turbo V8 that the factory exhaust keeps away from your ears, without taking away the 8 Series' status as a peaceful grand tourer. The Rog...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in Australia.
Valved exhausts and Australian checks
For a pink slip, roadworthy or safety certificate, the inspector checks the exhaust for leaks and secure mounting: a Rog system bolts onto the original mounting points. The cat-back keeps your factory cat, sports cats follow your state's rules, catless is track only, and your state decides.
On the road
Around town, valves closed keep your car very close to stock, and you open them whenever you like, on an open road or at the track.
Your documents
Each system is built from the VIN on your rego papers, and we send its technical documentation free on request, for your registration authority or your insurer.
Your insurance
Many policies treat an exhaust change as a modification to declare, so let your insurer know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Valved exhaust comparison for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleFrom order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleValved exhaust comparison for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleValved exhaust comparison for the Mercedes A45 W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Australia? The noise test explained.
The sound you choose, and a quiet car day to day: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
