Aston Martin DB11 V12: the majesty of the twin-turbo V12, the complete guide
The DB11 V12 introduced the twin-turbo 5.2: majesty, torque and endless reach. Fans of the naturally aspirated V12 miss a little of its voice: that is precisely what our exhaust restores, without taking anything away from its cruising refinement. This guide sets out, for your Aston Martin DB11 V12, what each choice changes: material, front section, sound, valves and fitting.
Written by ROG Motorsport · Updated
Your ROG exhaust for Aston Martin DB11 V12
From €3,990 in stainless steel, €4,990 in titanium
Configure my exhaust- Vehicles
- Aston Martin DB11 V12 5.2 (2017-2019)
- Engine
- 608 to 639 hp · 700 Nm, depending on the version
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted downpipe with 200 or 100 cells, or decat
- Valves
- ROG remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
Closely related versions have their own guide: Aston Martin DB11 V8 4.0, Aston Martin DB12 V8 4.0, Aston Martin DB9 V12 6.0, Aston Martin DBS Superleggera V12.
The 5.2 twin-turbo V12: modern power, with a soul waiting to be freed
The twin-turbo 5.2 V12 in your DB11 V12 is the pinnacle of the modern range: airliner torque, majestic top-end reach and supercar performance wrapped in a grand tourer. Forced induction and regulations have, however, softened the voice compared with the naturally aspirated V12s of the past, and that is the most common regret among owners.
The ROG exhaust answers exactly that regret: it frees the V12's depth and harmonics, restores its presence, and the valves keep the cruising refinement that is the essence of an Aston.
What makes up the exhaust on your Aston Martin DB11 V12
An exhaust system is best understood in two parts. Here is what each one does, and what ROG replaces.
The cat-back is the complete exhaust system
It is everything you can see under your Aston Martin DB11 V12, from the outlet of the front section to the tips: pipes, silencer, valves. This is where our research and development is focused, and it is what shapes the sound. On its own, it changes the character of the car.
The front section, where the catalytic converter sits
On your Aston Martin DB11 V12, it is the downpipe, the pipe leading from the turbo. It contains the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing this part is optional: it frees up the flow, and an ECU remap is what turns that into power.
Your Aston Martin DB11 V12 in figures
On a modern car, an exhaust system first changes the voice, the breathing and the weight at the rear. Power, on the other hand, comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures. Factory figures vary by version; Stage 2 figures published for the 639 hp version.
Our exhaust systems work perfectly with or without an ECU remap. On your Aston Martin DB11 V12, however, we recommend having it done at an approved tuning centre: it is what lets the engine reach its full potential.
To be completely transparent: the exhaust alone brings better breathing and sound. The 5.2 twin-turbo V12 responds very well to Stage 2 with an ECU remap at an approved tuning centre, and the figures above stay within the reliability range of an engine designed for far more.
Configuring your exhaust, step by step
4 choices, in the same order as the product page configurator.
-
Step 1 of 4: Material: stainless steel or titanium
For your Aston Martin DB11 V12, the exhaust costs €3,990 in stainless steel and €4,990 in titanium.
304 stainless steel
3 990 €
- Weight
- Baseline
- Sound
- Full and rounded
The benchmark for high-end exhausts: tough, corrosion-proof, with a full, rounded sound. The choice of most of our customers.
Titanium
4 990 €
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
Around 40% lighter than stainless steel for the same design, with a more metallic sound that turns crystal-clear at high revs. Its finish ranges from brushed to blued tints.
Over time, both hold up: 304 stainless steel stands up to winter salt and damp, and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 4: Front section: downpipe and catalytic converter
Optional: the downpipe on your Aston Martin DB11 V12, with its catalytic converter. Sound intensity is rated on our scale of 0 to 10, valves open; the factory exhaust scores 3.
Cat-back only
Included
7/10Factory emissions control
The factory catalytic converter stays in place. The starting point and, for many of our customers, more than enough.
200-cell sports catalytic converter
+1 060 €
8/10Road use and French MOT
Emissions control is still very much there, and flow improves noticeably. The choice for everyday driving.
100-cell sports catalytic converter
+1 060 €
9/10French MOT pass not guaranteed
Half as many cells: flow comes close to a decat and the sound gains real aggression at high revs.
Decat
+760 €
10/10Track use only
No emissions control: maximum flow, raw sound, the sharpest revving.
Sound intensity, on a scale of 0 to 10
- 10/10Decat downpipe + ROG cat-back
- 9/10100-cell sports catalytic converter + ROG cat-back
- 8/10200-cell sports catalytic converter + ROG cat-back
- 7/10ROG cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? A sports catalytic converter can trigger it: the oxygen sensor after the catalytic converter detects less cleaning than with the factory unit. It is not a fault. An ECU remap recalibrates the sensor, and a session with a diagnostic tool clears the fault code. With a decat, the warning light is almost certain without a remap. If it happens to you, call us and we will point you in the right direction. Passing the French MOT with a sports exhaust.
-
Step 3 of 4: Valves: ROG remote or factory control
Two ways to control the valves on your Aston Martin DB11 V12.
ROG remote
A small control unit fits in the boot. Two buttons, open and closed: the valves respond at any moment, whatever the drive mode. Simple to fit, and we stay on hand throughout the installation.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
If your vehicle is fitted with factory valves, the exhaust keeps their existing control. The drive modes decide, just as they did from the factory, with no added electronics.
On the motorway, with the valves closed, the gases pass through the silencer, designed for cruising: no drone at a steady speed. You open up when you feel like it, not when the motorway decides for you. More about exhaust drone.
-
Step 4 of 4: Tips: the visual signature
Match the tips to the style of your Aston Martin DB11 V12, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.
- Stainless steel
- Black
- Carbon
- Blued titanium
The ROG sound signature on the twin-turbo V12
Our exhaust gives the 5.2 V12 back its depth and majesty: a deep presence at idle, a broad, authoritative climb, harmonics restored through the revs, and refined bangs on the overrun with the valves open. With the valves closed, hushed cruising takes over again.
From order to fitting
-
Configuration
You choose your exhaust and enter your VIN, found in box E of your registration certificate.
-
Check
We check compatibility with your VIN before manufacturing begins.
-
Manufacturing
Your exhaust is made to order, for your car.
-
Delivery
Free in Europe, insured to your door, tracked from dispatch.
-
Fitting
No welding or cutting: clamps and gaskets, around two hours on a lift.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of delivery
- Payment
- In instalments with Klarna
- Installation
- At the garage of your choice
What about the manufacturer's warranty on your Aston Martin DB11 V12? In Europe, a manufacturer cannot refuse warranty cover simply because a part from another brand has been fitted: it has to prove that the fault comes from that part. Our article on the manufacturer's warranty.
Our recommendations for your Aston Martin DB11 V12
-
Daily driving
3 990 €
- Stainless
- Cat-back only
- ROG remote
Your Aston Martin DB11 V12 stays easy to live with, the factory emissions control is retained, and you open the valves whenever you decide.
View this configuration -
Fast road
6 050 €
- Titanium
- 200-cell downpipe
- ECU remap
More sound, more breathing, and a car you can still present at the French MOT.
View this configuration -
Track
5 750 €
- Titanium
- Decat downpipe
- Stage 2
The most extreme configuration, for track use only.
View this configuration
And if you are still unsure, that is perfectly normal: it is exactly why we answer the phone.
Aston Martin DB11 V12: your questions
How much power does an exhaust add on the Aston Martin DB11 V12?
As standard, the Aston Martin DB11 V12 produces 608 to 639 hp and 700 Nm, depending on the version. An exhaust system on its own mainly changes the sound, the breathing and the weight; power is gained with an ECU remap. With a Stage 2 build, the published figures for the 639 hp version reach 766 hp and 945 Nm.
Stainless steel or titanium: which material for the Aston Martin DB11 V12?
For the Aston Martin DB11 V12, the ROG exhaust costs €3,990 in stainless steel and €4,990 in titanium. 304 stainless steel is tough, rounded in tone and the most popular choice; titanium is around 40% lighter for the same design, with a more metallic sound at high revs.
Do you need to replace the catalytic converter on the Aston Martin DB11 V12?
No. On the Aston Martin DB11 V12, the cat-back alone carries the valves and already transforms the sound. Replacing the downpipe is an option for going further: with a 200-cell sports catalytic converter for the road, 100-cell or decat for more radical use, with an ECU remap to turn it into power.
Can the Aston Martin DB11 V12 pass the French MOT with a ROG exhaust?
With the cat-back only or the 200-cell sports catalytic converter, emissions control is retained: present the car with the valves closed. The 100-cell converter no longer guarantees a pass, and the decat fails the emissions test.
How is the ROG exhaust fitted on the Aston Martin DB11 V12?
No welding or cutting, using clamps and gaskets. Allow two hours on average for a well-equipped mechanic. The exhaust is built for your VIN, which guarantees compatibility before it ships.
What price and lead time for a ROG exhaust on the Aston Martin DB11 V12?
From €3,990 to €6,050 depending on the configuration. Allow 20 working days from order confirmation to delivery. Free delivery in Europe and a 3-year warranty.
Unsure about your configuration? Give us a call.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you drive and on your Aston Martin DB11 V12. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to sell to you over the phone: we help you choose, even if that means a cheaper option because it suits the way you drive.
RogMotorsport is a French brand built on one conviction: with an exhaust system, the support matters as much as the product. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG SLC43 R172 V6 biturbo: an open-air V6, the exhaust system guide The SLC43 is a compact roadster with a retractable hard top, which AMG equipped with a 3.0-litre twin-turbo...
- Mercedes-AMG E55 W211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...