Audi S5 8T V6: waking up the turbo V6, the complete exhaust system guide
The facelifted S5 8T moved to the supercharged 3.0 V6: more torque, less voice than the V8 it replaced. It is the classic owner's regret. Our exhaust fills precisely that gap: the supercharged V6 reveals a full-bodied sound that the factory exhaust completely smothers. Here you will find everything that matters before configuring the exhaust for your Audi S5 8T V6: catalytic converter, material, valves, tips and French MOT.
Written by ROG Motorsport · Updated
Your ROG exhaust for Audi S5 8T V6
From €2,405 in stainless steel, €3,005 in titanium
Configure my exhaust- Vehicles
- Audi S5 8T V6 (2012-2016)
- Engine
- 333 hp · 440 Nm
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted downpipe with 200 or 100 cells, or decat
- Valves
- ROG remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
Closely related versions have their own guide: Audi S5 8T V8, Audi A5 8T, Audi RS5 8T V8, Audi S4 / S5 B8 3.0 TFSI V6.
The Audi turbo V6: discreet power, too discreet
The turbo V6 in your S5 8T V6 is a remarkably efficient engine: torque everywhere, smoothness, reliability. Audi calibrated it for performance without ostentation, and the factory exhaust takes that logic to near-total silence. Many owners tell us the same thing: they like the discretion, but they would like to be able to choose.
That is exactly what the ROG valved exhaust makes possible: with the valves open, the V6 reveals a deep, muscular sound the factory version gives no hint of, with crisp crackles on the overrun. With the valves closed, the factory discretion is fully intact.
What makes up the exhaust on your Audi S5 8T V6
An exhaust system is best understood in two parts. Here is what each one does, and what ROG replaces.
The cat-back is the complete exhaust system
It is everything you can see under your Audi S5 8T V6, from the outlet of the front section to the tips: pipes, silencer, valves. This is the part where most of our research and development goes: it is what shapes the sound, and it is enough on its own to transform the car.
The front section, where the catalytic converter sits
On your Audi S5 8T V6, it is the downpipe, the pipe leading from the engine. It contains the factory catalytic converter: the second restriction in the exhaust, after the silencer. Replacing it is optional: it frees up the flow, and it is the ECU remap that turns that into horsepower.
Your Audi S5 8T V6 in figures
An exhaust system is judged first by ear and on the scales. The extra horsepower comes from an ECU remap.
Power
Torque
Published factory and Stage 2 figures.
The ROG exhaust works with or without an ECU remap. To get the full potential out of your Audi S5 8T V6, we advise taking it to an approved tuning centre afterwards.
To be completely transparent: the exhaust alone mainly improves breathing and sound. The significant gains come with Stage 2, the exhaust plus an ECU remap at an approved tuning centre, and the Audi turbo V6 handles them with ease: it is a proven tuning base, documented for years.
Configuring your exhaust, step by step
4 choices, in the same order as the product page configurator.
-
Step 1 of 4: Material: stainless steel or titanium
For your Audi S5 8T V6, the exhaust costs €2,405 in stainless steel and €3,005 in titanium.
304 stainless steel
2 405 €
- Weight
- Baseline
- Sound
- Full and rounded
The safe bet: strong, corrosion-proof, with a full, rounded sound. The best value for money.
Titanium
3 005 €
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
It makes the exhaust around 40% lighter for the same design. Its note is more metallic and clearer higher up the rev range, and its finish ranges from brushed to blued.
No worries on durability: 304 stainless steel shrugs off winter road salt and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 4: Front section: downpipe and catalytic converter
Optional: the downpipe on your Audi S5 8T V6, with its catalytic converter. Each option is placed on our sound scale of 0 to 10, valves open, with the factory exhaust at 3.
Cat-back only
Included
7/10Factory emissions control
The factory front section stays in place. It is already a complete transformation, and the choice of many of our customers.
200-cell sports catalytic converter
+760 €
8/10Road use and French MOT
More flow, emissions control retained: the right option for road use.
100-cell sports catalytic converter
+760 €
9/10French MOT pass not guaranteed
More open than the 200-cell: the sound hardens at high revs and emissions control is reduced.
Decat
+565 €
10/10Track use only
Flow with no filter at all: the rawest sound and the sharpest response.
Sound intensity, on a scale of 0 to 10
- 10/10Decat downpipe + ROG cat-back
- 9/10100-cell sports catalytic converter + ROG cat-back
- 8/10200-cell sports catalytic converter + ROG cat-back
- 7/10ROG cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports catalytic converter it can come on, because the rear oxygen sensor reads less cleaning. Nothing mechanical is wrong: an ECU remap or a session with a diagnostic tool sorts it out. Without a catalytic converter, you will need an ECU remap. If it happens to you, call us and we will point you in the right direction. Passing the French MOT with a sports exhaust.
-
Step 3 of 4: Valves: ROG remote or factory control
Two ways to control the valves on your Audi S5 8T V6.
ROG remote
A discreet control unit in the boot and a two-button remote: you open and close whenever you like, independently of the drive modes. For fitting, we support you by phone or by email.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
For vehicles fitted with factory valves: the exhaust connects to their control and the drive modes stay in charge, with no extra control unit.
At 130 km/h, many sports exhausts drone. Here, with the valves closed, the exhaust flows through the silencer and stays composed when cruising; open, it makes itself heard when you choose. More about exhaust drone.
-
Step 4 of 4: Tips: the visual signature
Match the tips to the style of your Audi S5 8T V6, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.
- Stainless steel
- Black
- Carbon
- Blued titanium
The ROG sound signature on the turbo V6
Our exhaust gives the V6 a deep, muscular voice, with assertive character under load and crisp crackles on the overrun with the valves open. The goal: a rewarding, controlled sound, never tiresome, that becomes completely discreet again with the valves closed. Two personalities, one exhaust.
From order to fitting
-
Configuration
You configure the exhaust and enter the VIN from box E of your registration certificate.
-
Check
Your VIN is checked before any manufacturing begins.
-
Manufacturing
The exhaust is produced to order, for your vehicle.
-
Delivery
Free in Europe, insured parcel, tracking number from dispatch.
-
Fitting
Around two hours in the workshop, with no welding or cutting.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of delivery
- Payment
- In instalments with Klarna
- Installation
- At the garage of your choice
Is your Audi S5 8T V6 still under the manufacturer's warranty? In Europe, the manufacturer cannot refuse cover simply because a part from another brand has been fitted: it is up to the manufacturer to prove that the fault comes from that part. Our article on the manufacturer's warranty.
Our recommendations for your Audi S5 8T V6
-
Daily driving
2 405 €
- Stainless
- Cat-back only
- ROG remote
Your Audi S5 8T V6 stays easy to live with, the factory emissions control is retained, and you open the valves whenever you decide.
View this configuration -
Fast road
3 760 €
- Titanium
- 200-cell downpipe
- ECU remap
The best of both worlds: character and breathing, with emissions control retained.
View this configuration -
Track
3 575 €
- Titanium
- Decat downpipe
- Stage 2
The most extreme configuration, for track use only.
View this configuration
Every Audi S5 8T V6 has its own story and its own use: if none of these profiles sounds like you, let's talk.
Audi S5 8T V6: your questions
How much power does an exhaust add on the Audi S5 8T V6?
As standard, the Audi S5 8T V6 produces 333 hp and 440 Nm. The exhaust alone acts first on sound, breathing and weight; the extra horsepower comes from an ECU remap. With a Stage 2 build, the published figures reach 428 hp and 560 Nm.
Stainless steel or titanium: which material for the Audi S5 8T V6?
For the Audi S5 8T V6, the ROG exhaust costs €2,405 in stainless steel and €3,005 in titanium. Stainless steel is the safe bet, with a full sound; titanium makes the exhaust around 40% lighter and gives a more metallic note higher up the rev range.
Do you need to replace the catalytic converter on the Audi S5 8T V6?
It is not compulsory. The cat-back alone is enough to change the character of the Audi S5 8T V6. Replacing the downpipe is how you go further, together with an ECU remap: 200 cells for the road, 100 cells or decat for more radical use.
Can the Audi S5 8T V6 pass the French MOT with a ROG exhaust?
The cat-back only and the 200-cell converter both retain emissions control: present the Audi S5 8T V6 with the valves closed. With the 100-cell converter, a pass is no longer guaranteed; the decat fails the emissions test.
How is the ROG exhaust fitted on the Audi S5 8T V6?
With clamps and gaskets, no welding or cutting: around two hours in the workshop for a well-equipped mechanic. The exhaust is built to the VIN of your Audi S5 8T V6.
What price and lead time for a ROG exhaust on the Audi S5 8T V6?
From €2,405 to €3,760 depending on the configuration. Allow 20 working days from order confirmation to delivery. Delivery is free and the exhaust comes with a 3-year warranty.
Unsure about your configuration? Give us a call.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you drive and on your Audi S5 8T V6. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to sell to you over the phone: we help you choose, even if that means a cheaper option because it suits the way you drive.
ROG is a French brand, and the way we work comes down to one idea: an exhaust system should be sold with advice, not just a product page. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG SLC43 R172 V6 biturbo: an open-air V6, the exhaust system guide The SLC43 is a compact roadster with a retractable hard top, which AMG equipped with a 3.0-litre twin-turbo...
- Mercedes-AMG E55 W211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...