BMW 135i E82 / E88: a six-cylinder in a compact coupé, the exhaust system guide
The 135i E82 is one of those BMWs enthusiasts seek out: a compact 1 Series coupé, rear-wheel drive and a turbocharged inline-six with 306 hp and 400 Nm. That balance is rare, and so is the potential. The only false note is the factory exhaust, which lets almost nothing of the engine's voice through. This guide helps you define the Rog configuration that suits your coupé, from the type of tips to valve control.
Your valved exhaust for BMW 135i E82 / E88 N54 / N55 is configured from your VIN, and the BMW 1 Series E82 / E88 Valved Exhaust page brings together every system we make for this generation.
Valved Exhaust System for BMW 135i E82 / E88 N54 / N55 3.0T (2008-2013)From $2,840 · free delivery · 20 working days
View
Your Rog exhaust for the BMW 135i E82 / E88
Price shown on the product page, in your currency
Configure my exhaustThe short answer.
- Vehicles
- BMW 135i E82 / E88. Same exhaust for the E82 coupé and E88 convertible
- Engine
- N55 / N54 · 306 hp · 400 Nm
- Exhaust
- Valved cat-back, built for your VIN
- Material
- 304 stainless steel or titanium
- Front section
- Optional: catted downpipe with 200 or 100 cells, or decat
- Valves
- Rog remote, or factory control if your vehicle has it
- Lead time
- 20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship
Closely related versions have their own guide: BMW 1M E82 N54 3.0T, BMW 335i F30 / F31 3.0T, BMW 335i GT F34 3.0T, BMW 335i N54 E90 / E91 / E92 / E93 3.0T.
N54 then N55: the turbocharged six-cylinder that made the 135i's reputation
Depending on the model year, your 135i gets one of two engines: the N54, a three-liter inline-six boosted by two turbos, then the N55, which makes do with a single twin-scroll turbo. Both are rated at 306 hp and 400 Nm. The torque arrives very low down and stays there for a long time, which gives the small coupé surprising liveliness from the very first meters, in any gear.
The inline-six is a naturally balanced architecture with a smooth sound, which the turbos and the factory exhaust set out to iron flat. The Rog valved exhaust replaces this system. With the valves open, the 135i regains a voice worthy of its engine; with them closed, it remains a pleasant everyday coupé. You switch from one to the other on demand, and both the engine and the ECU remain standard.
How the exhaust on your BMW 135i E82 / E88 is put together
An exhaust system is best understood in two parts. Here is what each one does, and what Rog replaces.
The cat-back is the complete exhaust system
It is everything you can see under your BMW 135i E82 / E88, from the outlet of the front section to the tips: pipes, muffler, valves. This is the part where most of our research and development goes: it is what shapes the sound, and it is enough on its own to transform the car.
The front section, where the catalytic converter sits
On your BMW 135i E82 / E88, this is the downpipe, the pipe that leads away from the turbo. It contains the factory catalytic converter: the second restriction in the exhaust, after the muffler. Replacing it is optional: it frees up the flow, and it is the ECU remap that turns that into horsepower.
Your BMW 135i E82 / E88 in figures
An exhaust system is judged first by ear and on the scales. The extra horsepower comes from an ECU remap.
Power
Torque
Published manufacturer and Stage 2 figures.
The Rog exhaust works with or without an ECU remap. To get the full potential out of your BMW 135i E82 / E88, we recommend taking it to an approved tuning center afterwards.
The N54 and N55 have a reputation for hiding a good reserve beneath their factory calibration. A Stage 2 remap seeks to exploit it, with a result that depends on the engine, its maintenance and the tuner. In that context, the Rog exhaust brings the sound that goes with a sharper six-cylinder.
Configuring your exhaust, step by step
4 choices, in the same order as the product page configurator.
-
Step 1 of 4: Material: stainless steel or titanium
Titanium costs more than stainless steel; the price of each version is shown on the product page, in your currency.
304 stainless steel
- Weight
- Baseline
- Sound
- Full and rounded
The safe bet: strong, corrosion-proof, with a full, rounded sound. The best value for money.
Titanium
- Weight
- Around 40% lighter
- Sound
- Metallic, crystal-clear
It makes the exhaust around 40% lighter for the same design. Its note is more metallic and clearer higher up the rev range, and its finish ranges from brushed to blued.
No worries on durability: 304 stainless steel shrugs off winter road salt and titanium does not rust. Stainless steel or titanium: what really changes.
-
Step 2 of 4: Front section: downpipe and catalytic converter
Optional: the downpipe on your BMW 135i E82 / E88, with its catalytic converter. Each option is placed on our sound scale of 0 to 10, valves open, with the factory exhaust at 3.
Cat-back only
Included
7/10Factory emissions control
The factory front section stays in place. It is already a complete transformation, and the choice of many of our customers.
200-cell sports catalytic converter
8/10Road use and inspection
More flow, emissions control retained: the right option for road use.
100-cell sports catalytic converter
9/10Inspection: depends on local rules
More open than the 200-cell: the sound hardens at high revs and emissions control is reduced.
Decat
10/10Track use
Flow with no filter at all: the rawest sound and the sharpest response.
Sound intensity, on a scale of 0 to 10
- 10/10Decat downpipe + Rog cat-back
- 9/10100-cell sports catalytic converter + Rog cat-back
- 8/10200-cell sports catalytic converter + Rog cat-back
- 7/10Rog cat-back only, factory catalytic converter retained
- 3/10Factory exhaust, for comparison
Valves open. With the valves closed, every configuration becomes discreet again.
What about the engine warning light? With a sports cat, it can come on with some engines: the sensor placed after the catalytic converter measures a different level of emissions control from the original. It is not a mechanical failure, but a warning light should never be masked or cleared without dealing with its cause: the right answer is a catalytic converter suited to the engine, with a map by a tuner who takes it into account. The decat version, for track use only, almost always triggers it. If this happens to you, write to us and we will point you in the right direction. Passing vehicle inspection with a sports exhaust.
-
Step 3 of 4: Valves: Rog remote or factory control
Two ways to control the valves on your BMW 135i E82 / E88.
Rog remote
A discreet control unit in the trunk and a two-button remote: you open and close whenever you like, independently of the drive modes. For fitting, we support you by email.
Factory control
- Only for vehicles fitted with factory valves
- Controlled by the drive modes
For vehicles fitted with factory valves: the exhaust connects to their control and the drive modes stay in charge, with no extra control unit.
At 130 km/h, many sports exhausts drone. Here, with the valves closed, the exhaust flows through the muffler and stays composed when cruising; open, it makes itself heard when you choose. More about exhaust drone.
-
Step 4 of 4: Tips: the visual signature
Match the tips to the style of your BMW 135i E82 / E88, understated or bold. A particular finish in mind? Send us a photo and we will look at it together.
- Chrome
- Gloss black
- Blued titanium
- M Performance Carbon Black
- M Performance Carbon Titanium
- M Performance Carbon Forged
Your choices carry over to the product page: only the finishes, your VIN and the cart remain.
The Rog sound signature on the 135i's six-cylinder
A BMW inline-six has a recognizable voice: a smooth, round song that gains density with the revs. In the 135i, the factory exhaust reduces it to a murmur, and the turbos add their own filter. The coupé is fast, but it goes about it almost silently.
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty.
With the Rog exhaust and the valves open, that song finds its place again: a frank growl at start-up, then a smooth, continuous climb up to the next gear change. With the valves closed, you drive in calm, so you can leave early in the morning without waking the street.
From order to fitting
-
Configuration
You configure the exhaust and enter the VIN from box E of your registration document or from the base of the windshield.
-
Check
Your VIN is checked before any manufacturing begins.
-
Manufacturing
The exhaust is produced to order, for your vehicle.
-
Delivery
Free, insured parcel, tracking number from dispatch.
-
Fitting
Around two hours in the workshop, with no welding or cutting.
20 working days from order confirmation to delivery
- Warranty
- 3 years, parts and workmanship, from the date of purchase
- Payment
- Card, PayPal or bank transfer
- Installation
- At the garage of your choice
Is your BMW 135i E82 / E88 still under the manufacturer's warranty? In Europe, the manufacturer cannot refuse it simply because a part from another brand has been fitted: it is up to them to prove the fault comes from it. Our article on the manufacturer's warranty.
Our recommendations for your BMW 135i E82 / E88
-
Daily driving
- Stainless
- Cat-back only
- Rog remote
Your BMW 135i E82 / E88 stays easy to live with, the factory emissions control is retained, and you open the valves when you decide.
View this configuration -
Fast road
- Titanium
- 200-cell downpipe
- ECU remap
The best of both worlds: character and breathing, with emissions control retained.
View this configuration -
Track
- Titanium
- Decat downpipe
- Stage 2
The most extreme configuration, for track use only.
View this configuration
Every BMW 135i E82 / E88 has its own history and use: if none of these profiles fits you, let's talk.
BMW 135i E82 / E88: your questions
How much power does an exhaust add on the BMW 135i E82 / E88?
As standard, the BMW 135i E82 / E88 produces 306 hp and 400 Nm. The exhaust alone acts first on sound, breathing and weight; the extra horsepower comes from an ECU remap. With a Stage 2 build, the published figures reach 380 hp and 540 Nm.
Stainless steel or titanium: which material for the BMW 135i E82 / E88?
The Rog exhaust comes in stainless steel and titanium, at the price shown on the product page in your currency. Stainless steel is the safe bet, with a full sound; titanium makes the exhaust around 40% lighter and gives a more metallic note higher up the rev range.
Do you need to replace the catalytic converter on the BMW 135i E82 / E88?
It is not compulsory. The cat-back alone is enough to change the character of the BMW 135i E82 / E88. Replacing the downpipe is how you go further, together with an ECU remap: 200 cells for the road, 100 cells or decat for more radical use.
Will a Rog exhaust pass vehicle inspection on the BMW 135i E82 / E88?
The cat-back only and the 200-cell converter keep emissions control: present the BMW 135i E82 / E88 with the valves closed. With the 100-cell, acceptance at the emissions test depends on the car and local rules; the decat is intended for track use.
How is the Rog exhaust fitted on the BMW 135i E82 / E88?
With clamps and gaskets, no welding or cutting: around two hours in the workshop for a well-equipped mechanic. The exhaust is built to the VIN of your BMW 135i E82 / E88.
What price and lead time for a Rog exhaust on the BMW 135i E82 / E88?
The price depends on the configuration and is shown on the product page, in your currency. Allow 20 working days from order confirmation to delivery. Delivery is free and the exhaust comes with a 3-year warranty.
Valved Exhaust System for BMW 135i E82 / E88 N54 / N55 3.0T (2008-2013)
From $2,840 · 3-year warranty
Configure my exhaustUnsure about your configuration? Write to us.
Stainless steel or titanium, cat-back only or the complete system: the right choice depends on how you use your BMW 135i E82 / E88. We take the time to talk it through before you order, with a reply within 24 hours. We are not here to push a sale: we help you choose, even if that means a cheaper option because it suits the way you drive. Write to us: we reply in writing, in English.
Rog is a French brand, and the way we work comes down to one idea: an exhaust system should be sold with advice, not just a product page. More than 500 exhaust systems fitted and a rating of 4.9 out of 5.
Further reading
Read next
- Mercedes-AMG E55 W211 / S211 V8 Kompressor: the wolf in a business suit, the exhaust guide With the E55 W211, AMG slipped a 476 hp, 700 Nm supercharged V8 into an E-Class that looks...
- Mercedes-AMG CLS53 C257: the return of the straight-six, the exhaust system guide A four-door coupé with flowing lines, the CLS53 C257 benefits from Mercedes' return to a layout the brand...
- Toyota GR Supra A90 L6: the B58 takes center stage, the exhaust system guide The GR Supra A90 revived a legendary line by pairing a short rear-wheel-drive chassis with the B58 3.0-liter...