









Valved Exhaust System for Alfa Romeo Giulietta 940 (2010-2020)
Configuration
Alfa Romeo Giulietta 940 Valved Exhaust (2010-2020)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Alfa Romeo Giulietta 940 exhaust in detail.
Giulietta 940 exhaust made to order: every Giulietta 940 valved exhaust from Rog is built from your VIN. Your Giulietta 940 exhaust system gets the sound you choose, in stainless steel or titanium. At Alfa Romeo, engineering has always been a matter of temperament, and the Giulietta 940 carries that heritage in an everyday hatchback. In the version this system is designed for, its turbo engine delivers 235 hp and 340 Nm, from 2010 to 2020; yet modern engines have been tamed by regulations, and the factory sound does not tell the legend of the Biscione.
The Rog valved cat-back, also known as a valve exhaust, tells its story: a full, Latin tone, assertive character under load, clear crackles on the overrun when the valves are open. Closed again, they give the compact back its everyday discretion, in town as on long stages.
We build the system to your VIN, checked before production; it fits without welding, with clamps and gaskets, in about two hours, with the original valve control if the Giulietta has it, and the Rog remote otherwise.
The Giulietta entrusts emissions control to a downpipe placed just after the turbo, a part we offer to replace under the “Downpipe” option. Fitted alone, it changes the voice and a few kilos; it is the ECU remap that turns it into horsepower, with the result depending on the tune. A Giulietta that also handles daily journeys will keep the 200-cell downpipe, the one that maintains emissions control; the 100-cell will be accepted or not depending on the car and the rules in your country, and the decat version gives the freest sound. 304 stainless steel and titanium, around 40% lighter and offered in three colors, share the choice of material.
The sound, configuration by configuration
On a scale of 0 to 10, a stock Alfa Romeo Giulietta 940 sits around 3. With the Rog system alone and the valves open, it goes to around 7: already night and day, and the configuration to start with. Beyond 7, the Downpipe option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10. If your Alfa Romeo Giulietta 940 has a particulate filter (GPF/OPF), it softens the sound a little; the difference is still clear with the system alone.
Made from your VIN, fitted by your garage
Every system is made from your VIN and checked before production: it fits your Alfa Romeo Giulietta 940 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.
Alfa Romeo Giulietta 940 exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | Alfa Romeo Giulietta, type 940 |
| Engine | Turbocharged four-cylinder, 235 hp and 340 Nm (reference version) |
| Years | 2010-2020 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Downpipe (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat (“Downpipe” option) |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Alfa Romeo Giulietta 940 exhaust.
My Giulietta 940 is not the 235 hp version: can I still order?
Yes, after checking: we only publish figures for the 235 hp, 340 Nm version, without detailing the Giulietta’s other engines, and it is your VIN, checked before manufacturing, that will tell whether the system is suitable.
Does the Giulietta 940’s map need changing with the Rog system?
It can stay stock as long as only the cat-back is fitted; an ECU remap only makes sense with the downpipe, to turn that flow into power according to the chosen tune.
For the vehicle inspection of a modified Giulietta 940, what should be checked?
That the valves are closed and that the downpipe is factory or 200-cell: catalytic converter active, voice close to standard. A Giulietta with the 100-cell will be judged according to the vehicle and your country.
On long family journeys, does the equipped Giulietta 940 stay relaxing?
Yes, with the valves closed: the cabin stays calm at a steady speed, and the Alfa temperament only returns when you ask for it, via the factory control or the Rog remote.
Alfa Romeo Giulietta 940: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear muffler and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the highway.
Alfa Romeo Giulietta 940: factory valves or Rog valves?
If your Alfa Romeo Giulietta 940 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the trunk or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.
Rog expert guide
Alfa Romeo Giulietta 940 exhaust: which one to choose?
The Giulietta is the Italian hatchback with a timeless design, and a very popular base for personalization. A valved exhaust is the modification that changes its everyday life the most: instant character, reversible at the press of the remote. Here...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in the US.
State inspections and your exhaust
A Rog cat-back leaves your factory catalytic converters, oxygen sensors and OBD untouched, and valves closed, your car sounds very close to stock at inspection. Sport cats follow your state's rules, the catless version is for the track only, and your state decides.
On the road
Valves closed around town, your car sounds very close to stock, and you open them whenever you choose.
Your documents
Each system is built from your VIN, and we send its technical documentation free on request, for your state's inspection or for your insurer.
Your insurance
Some insurers ask you to declare aftermarket parts, so let yours know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
From order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleValved exhaust comparison for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleValved exhaust comparison for the Mercedes A45 W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleValved exhaust comparison for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in California? And in your state?
The sound you choose, and a quiet car when it matters: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
