Valved Exhaust System for Ferrari FF V12 6.3 (2011-2012)
Configuration
Ferrari FF V12 6.3 Valved Exhaust System (2011-2012)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat front pipes + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Ferrari FF exhaust in detail.
Four seats, a shooting brake silhouette, four-wheel drive and a naturally aspirated 6.3-liter V12 mounted front-mid: the FF shook up Maranello’s habits without giving up the big engine. Its 660 hp and 683 Nm arrive without forced induction, with an immediate response. This page covers model years 2011 and 2012; the GTC4Lusso that succeeded it has its own system, and your VIN lets us confirm everything before manufacturing.
Deep and metallic at idle, the twelve-cylinder then climbs towards an ever higher, almost mechanical scream. In the FF, the factory exhaust delivers a tamed version, with the highs shaved off. With the valves open, the Rog cat-back gives it a real crescendo and downshifts with presence; with the valves closed, the car becomes the grand tourer again that takes four people a long way without tiring them.
Under this long front-engined chassis, fitting requires neither welding nor cutting: clamps, gaskets and about two hours on a lift. The valves follow the factory control if the FF has one, otherwise a Rog remote, whose box hides in the trunk.
The FF’s front section is the pipes placed just after the manifolds, with the catalytic converter; the page sells them under the “Manifold” option. On a non-turbo V12, expect a modest gain, 3 to 8% once the ECU remap is done, and keep the 200-cell version if you want to retain emissions control. In 304 stainless steel or titanium, around 40% lighter and available in brushed, gold or purple, the system is chosen according to use: stainless steel for winters and long journeys, titanium for lightness.
Ferrari FF 6.3 V12 exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle | Ferrari FF, V12 6.3 |
| Engine | 6.3-liter naturally aspirated direct-injection V12, 660 hp and 683 Nm |
| Years | 2011-2012 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Front section (option) | Front pipes with 200-cell or 100-cell catalytic converters, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Ferrari FF 6.3 V12 exhaust.
I have a GTC4Lusso: can I fit the system designed for the FF?
No: it is designed for the 6.3-liter FF, 2011 and 2012 model years. Its two successors, the GTC4Lusso V12 and the V8-engined GTC4Lusso T, each have a dedicated page. If your FF falls outside those years, send us its VIN and we will check before manufacturing.
What would be the point of an ECU remap on the FF’s V12?
Not with the cat-back alone, which leaves the V12 and its management intact. With the sports front pipes, it becomes the real lever: the published Stage 2 figures for the FF are 719 hp and 738 Nm.
Ferrari FF V12 6.3 with a Rog exhaust: what should you know about vehicle inspection?
The configuration helps a lot: with the valves closed, the V12 returns to a sound close to stock, and emissions control stays in place with the factory front section or the 200-cell. As for 100-cell pipes, they are accepted or not depending on the car and the rules in your country, and a decat FF never leaves the confines of the circuit, for which this version is reserved.
On a long journey in the FF, does the exhaust drone?
With the valves closed, the gases flow through a muffler designed for cruising: no drone at a steady speed, which matters on a car built to cover long distances with four on board. You open them when the road allows.
Rog expert guide
Ferrari FF V12: the twelve-cylinder shooting brake, the exhaust system guide
Four seats, four-wheel drive and a 6.3-liter naturally aspirated V12: with its shooting brake silhouette, the FF shook up Ferrari's habits. It is nonetheless a true Ferrari, powered by one of the noblest engines of its generation. Yet its factory...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in the US.
State inspections and your exhaust
A Rog cat-back leaves your factory catalytic converters, oxygen sensors and OBD untouched, and valves closed, your car sounds very close to stock at inspection. Sport cats follow your state's rules, the catless version is for the track only, and your state decides.
On the road
Valves closed around town, your car sounds very close to stock, and you open them whenever you choose.
Your documents
Each system is built from your VIN, and we send its technical documentation free on request, for your state's inspection or for your insurer.
Your insurance
Some insurers ask you to declare aftermarket parts, so let yours know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in California? And in your state?
The sound you choose, and a quiet car when it matters: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles