






Valved Exhaust System for Mercedes-AMG GLC43 X253 3.0 V6 biturbo (2020-2022)
Configuration
Mercedes-AMG GLC43 X253 Valved Exhaust System (2020-2022)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity ratings are not yet available for this model.
Which valved exhaust for a Mercedes-AMG GLC43 X253?
The Rog system for the facelifted Mercedes-AMG GLC43 X253 (2020-2022) is a valved cat-back exhaust in 304 stainless steel or titanium, built to your VIN for the 390 hp, 520 Nm 3.0-liter twin-turbo V6. Valves open, the SUV gains a full voice under load that never becomes tiring; closed, it is once again the comfortable everyday GLC.
Sound, options and fitting in detail: our Mercedes-AMG GLC43 X253 guide.
Between 2020 and 2022, the GLC43 X253 entrusts its 390 hp and 520 Nm to a 3.0-liter twin-turbo V6, the gateway to AMG six-cylinders. The page is limited to this V6 generation: the more recent GLC43, now four-cylinder, is not covered. The four-cylinder GLC300 and the V8 GLC63, on the same X253 base, each have a dedicated page.
On an SUV, you do not necessarily expect this deep, muscular tone, which mufflers designed for a conventional clientele almost completely erase. With the valves open, the Rog cat-back gives it back a full voice under load, with crisp crackles on lift-off, without ever becoming tiring; with the valves closed, the GLC43 becomes completely discreet again for everyday use.
Fitting, without welding or cutting, takes about two hours: clamps, gaskets, a system built to your VIN. The AMG modes control the valves if the SUV has them from the factory; otherwise, the Rog remote.
On the V6, this SUV’s “Manifold” option corresponds to the catalyzed downpipe behind the turbos. With 200 cells, emissions control remains, which suits a family SUV. For the 100-cell, acceptance depends on the car and the rules in your country, and the decat version is reserved for track use, an unusual job for a GLC. Remapped with this part, the GLC43 reaches 430 hp and 640 Nm according to the page. Titanium, around 40% lighter than 304 stainless steel, gives a more metallic note.
Mercedes-AMG GLC43 X253 3.0 V6 biturbo exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | Mercedes-AMG GLC43 X253, V6 |
| Engine | 3.0-liter twin-turbo V6, 390 hp and 520 Nm |
| Power in kW | 287 kW |
| Years | 2020-2022 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory AMG modes or the Rog remote |
| Front section (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Mercedes-AMG GLC43 X253 3.0 V6 biturbo exhaust.
Can the four-cylinder GLC43 X254 take this system?
No: the page only targets the 2020 to 2022 GLC43 X253 with the twin-turbo V6, with no carry-over to the more recent 2.0-liter engine. Your SUV’s VIN lets us confirm before manufacturing.
Does an equipped GLC43 X253 necessarily need its map modified?
Not for the cat-back, which works with the original AMG engine management. If you add the downpipe, an ECU remap turns it into power: the table on the page reaches 430 hp and 640 Nm.
With a vehicle inspection coming up, what should be checked on an equipped GLC43 X253?
Closed valves and the original front section or the 200-cell downpipe: the SUV keeps a stock volume and active emissions control. In the 100-cell version, your GLC43 will be accepted or not depending on the car and the rules in your country, which is worth checking beforehand. The decat downpipe, reserved for track use, obviously does not go to the inspection.
Does the GLC43 X253’s V6 sound like the GLC63’s V8 with the Rog system?
No: the V6 keeps a deep, muscular tone, drier, whereas the GLC63’s V8 rumbles and cracks on the overrun. The two SUVs also have separate systems and pages.
Mercedes-AMG GLC43 X253 3.0 V6 biturbo: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear muffler and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the highway.
Rog expert guide
Best valved exhaust for Mercedes-AMG GLC43 X253
For a facelifted Mercedes-AMG GLC 43 X253, the flap exhaust to choose is a cat-back built to its VIN that lets the 3.0-liter twin-turbo V6 speak without taking anything away from the SUV's comfort. The Rog line follows that idea,...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Your country
Rog in the US.
State inspections and your exhaust
A Rog cat-back leaves your factory catalytic converters, oxygen sensors and OBD untouched, and valves closed, your car sounds very close to stock at inspection. Sport cats follow your state's rules, the catless version is for the track only, and your state decides.
On the road
Valves closed around town, your car sounds very close to stock, and you open them whenever you choose.
Your documents
Each system is built from your VIN, and we send its technical documentation free on request, for your state's inspection or for your insurer.
Your insurance
Some insurers ask you to declare aftermarket parts, so let yours know: our free technical documentation makes it easy.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleFrom order to fitting of your Rog exhaust
Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...
Read the articleHow to configure your Rog exhaust
A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....
Read the articleBest valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in California? And in your state?
The sound you choose, and a quiet car when it matters: what you get with a Rog valved exhaust in...
Read the articleNo article matches this search.
All articles
