Brushed titanium valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), pure sound without resonator, Rog gloss black tips - RogMotorsport
Close-up of the titanium valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): TIG welds and finish - RogMotorsport
Detail of the titanium tubing on the valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) - RogMotorsport
Rog valve control box for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): control unit, remote control and case supplied with the exhaust system - RogMotorsport
Rog exhaust valve remote control for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) - RogMotorsport
RogMotorsport parcel: exhaust system for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) delivered protected in its reinforced box - RogMotorsport
Rog valved silencer for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
Rog exhaust tip in polished stainless chrome for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport
Rog exhaust tip in blued titanium for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport
Rog exhaust tip in gloss black for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport

Valved Exhaust System for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016)

    Free delivery
    Brushed titanium valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), pure sound without resonator, Rog gloss black tips - RogMotorsport
    Close-up of the titanium valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): TIG welds and finish - RogMotorsport
    Detail of the titanium tubing on the valved exhaust for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) - RogMotorsport
    Rog valve control box for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): control unit, remote control and case supplied with the exhaust system - RogMotorsport
    Rog exhaust valve remote control for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) - RogMotorsport
    RogMotorsport parcel: exhaust system for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016) delivered protected in its reinforced box - RogMotorsport
    Rog valved silencer for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016): valves open, direct flow; valves closed, the gases pass through the silencer - RogMotorsport
    Rog exhaust tip in polished stainless chrome for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in blued titanium for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport
    Rog exhaust tip in gloss black for Aston Martin DB9 / DB9 Volante V12 6.0 (2004-2016), R engraved near the outlet - RogMotorsport

    Configuration

    Aston Martin DB9 Valved Exhaust, DB9 Volante V12 6.0 (2004-2016)

    Read the guide for this model

    A question about this exhaust?

    Aston MartinDB9

    The Aston Martin DB9 / DB9 Volante V12 exhaust in detail.

    DB9 valved exhaust, made to order from your VIN, with the sound and material you choose. Few engines have a voice as recognisable as the DB9’s naturally aspirated 6.0-litre V12: silky when cruising, then howling and crystalline as it nears the red line. This 517 hp, 620 Nm twelve-cylinder will no longer be built, and its standard system, calibrated for grand tourer discretion, keeps the high harmonics to itself.

    The Rog system is designed for the DB9 V12’s entire production run, from 2004 to 2016, and built to your VIN. With no turbo to dampen the pulses, the exhaust provides all the character here: with the valves open, the valved cat-back turns every climb through the revs into a crescendo; with the valves closed, the hushed refinement returns, close to stock. The DB11, DB12 and DBS Superleggera have their own systems. That is the whole point of a DB9 exhaust system with valves: a voice when you want it, calm when you need it.

    Band clamps, gaskets, no welding: allow about two hours on a lift. The valves follow the factory control if your DB9 has one; failing that, the Rog remote opens and closes them, with its box housed in the boot.

    Here, the manifolds really are manifolds: they collect the gases from each bank of six cylinders, and they house the original catalytic converter. Their design matters, so with an ECU remap the V12 gains for real, but modestly, around 3 to 8%, whereas without one it is mainly its voice that changes. For a DB9, emissions control is preserved with 200 cells, acceptance of the 100-cell depends on the car and the rules in your country, and the decat version gives the freest sound. Finally, 304 stainless steel or titanium, around 40% lighter and finished in brushed, gold or purple, dresses the DB9’s four round tips.

    The sound, configuration by configuration

    On our scale of 0 to 10, the Rog system alone, valves open, sits around 7: the configuration to start with. Beyond 7, the Manifold option also replaces the catalytic converter: the 200-cell sports version gives 8 to 9 out of 10, the decat version 10 out of 10.

    Made from your VIN, fitted by your garage

    Every system is made from your VIN and checked before production: it fits your Aston Martin DB9 perfectly, with no welding, on the original mounting points. Fitting is done by the garage of your choice; after ordering, write to us with your order number and we will suggest three trusted garages near you. Allow 20 working days from order confirmation to delivery, with free shipping.

    Aston Martin DB9 / DB9 Volante V12 6.0 exhaust specifications.

    System typeValved cat-back (valve exhaust), built to your VIN
    VehiclesAston Martin DB9 V12 coupé and Volante, all production years
    Engine6.0-litre naturally aspirated V12, 517 hp and 620 Nm
    Years2004-2016
    Materials and finishes304 stainless steel or titanium; titanium in brushed, gold or purple
    ValvesFactory valve control if the car has it, otherwise the Rog remote
    Manifold (option)Manifolds with 200-cell or 100-cell catalytic converters, or decat
    FittingClamps and gaskets, no welding, about 2 hours
    Manufacturing and deliveryMade to order, 20 working days, free delivery
    Warranty3 years, parts and workmanship

    Questions about the Aston Martin DB9 / DB9 Volante V12 6.0 exhaust.

    Does the system cover every DB9 V12, from 2004 to 2016?

    Yes, this system is designed for the DB9 V12 6.0 across its entire production, from 2004 to 2016. As the model years evolved over time, we check your VIN before building.

    Does the DB9’s V12 6.0 need an ECU remap after fitting?

    No. The cat-back requires no work on the V12’s ECU. An ECU remap becomes worthwhile if you replace the manifolds: on this naturally aspirated engine, expect a gain of around 3 to 8%, nothing like a turbo engine.

    Vehicle inspection: which configuration should be kept on a DB9 V12?

    Closed valves and active catalytic converters: original or 200-cell manifolds. The V12 then becomes as reserved as on delivery day. The 100-cell is accepted or not depending on the car and your country.

    Why do the manifolds matter so much on the DB9’s naturally aspirated V12?

    On a naturally aspirated engine, the design of the manifolds affects cylinder filling, more so than on a turbocharged engine. If you are mainly after the voice, the cat-back is enough; if you are tuning the engine, manifolds and an ECU remap go together.

    Does the DB9 Volante take the same system as the coupé?

    Yes. The coupé and the Volante take the same Rog system: same chassis, same engine, same clamp-and-gasket fitting. Your VIN is only used to confirm the version and model year before manufacturing.

    Does the DB9 exhaust drone on the motorway?

    No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.

    Aston Martin DB9: factory valves or Rog valves?

    If your Aston Martin DB9 has factory valves, you can choose to keep them: the system arrives with their mounts in place, you refit them and they work as before, through the drive modes. With Rog valves, the system comes already fitted to the exhaust and is controlled by remote; open or closed, the valves stay in the chosen position. The small control unit goes in the boot or at the front and connects to the cigarette lighter socket, to ring terminals or directly to the battery: everything is pre-wired, nothing to cut, 10 to 15 minutes on average. The remote is shipped without a battery because of carrier rules: remember to fit one.

    Rog expert guide

    Aston Martin DB9 / DB9 Volante exhaust: which one to choose?

    The DB9 may well be the most beautiful GT of its era, and its naturally aspirated V12 now makes it an exceptional used buy with rising values. A quality exhaust system is THE modification that elevates it: the V12 deserves...

    Read the guide for my model

    In detail

    Rog Advisor

    A question about this exhaust?

    Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.

    Your configuration is attached to the question.

    The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.

    Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us

    Reviews imported from our previous system and translated from French; verified purchases carry the badge.

    Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.

    The detail.
    From every angle.

    Turn the car over. Explore the system.
    Enter the Rog Workshop.

    Explore the 3D Workshop Demonstration based on BMW M2 F87.
    3D model & credits
    Rog demonstration car based on the BMW M2 F87

    Drag to change your viewpoint.

    THE Rog CRAFT

    Our process.

    From the first bend to the last check. The same care at every step.

    1. Design

      Designed for your vehicle.

      Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.

    2. Manufacture

      Crafted with precision.

      Tube bending, part fitting and TIG welding: every joint receives the same care.

    3. Finishing

      Material, elevated.

      The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.

    4. Assembly

      Every part in its place.

      Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.

    5. Inspection

      Check. Then approve.

      Geometry, welds, connections and gas flow: the key points are inspected before shipping.

    6. Shipping

      Ready to join you.

      Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.

    Attention to detail.At every step.

    Free delivery

    Customer builds

    Your videos & photos

    The Rog lines fitted on our customers' vehicles, in real conditions.

    Builds
    500+
    Brands
    28
    Satisfaction
    4,9

    The journal

    News & advice

    11 Nov 2026 2 min read

    From order to fitting of your Rog exhaust

    Your Rog exhaust is made for your car, to its VIN. Here is what happens between your order and the...

    Read the article
    11 Nov 2026 7 min read

    How to configure your Rog exhaust

    A Rog exhaust is configured in five decisions, always in the same order: sound, material, front section, valves, then looks....

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Audi RS3 8Y

    Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    6 Nov 2026 4 min read

    Valved exhaust comparison for the Mercedes A45 W177

    Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...

    Read the article
    6 Nov 2026 5 min read

    Valved exhaust comparison for the BMW M2 G87

    Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...

    Read the article
    2 Nov 2026 12 min read

    Exhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)

    Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...

    Read the article
    1 Nov 2026 9 min read

    Changing your exhaust: what inspections and approvals cost in 9 countries

    What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...

    Read the article
    30 Oct 2026 5 min read

    Is a cat-back exhaust legal in Ireland? What the NCT checks.

    A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...

    Read the article

    No article matches this search.

    All articles