Valved Exhaust System for Audi Q3 / Q3 Sportback F3 TFSI (2018+)
Configuration
Audi Q3 / Q3 Sportback F3 Valved Exhaust System (2018+)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Audi Q3 / Q3 Sportback F3 exhaust in detail.
The second-generation Q3, type F3, has been on sale since 2018; this page covers it in its 150 hp and 250 Nm turbocharged four-cylinder TFSI version, the figures used by the page and its guide. The five-cylinder RS Q3 F3 has its own system.
Modern and solid, this small TFSI was calibrated by Audi for economy and silence: in the stock SUV, its sound remains anonymous. With the valves open, our valved cat-back gives it a fuller tone and a few crackles on the overrun, without excess; with the valves closed, the Q3 becomes the discreet family-trip SUV again.
This model is one of the older pages carried over without a detailed technical specification: we check your VIN, in field E of the registration document, before any manufacturing, engine included. Installation, with no welding, comes down to clamps and gaskets, for about two hours; factory valves keep their control if they exist, and the Rog remote takes over on a Q3 without them.
Under the heading “Manifold”, the page sells the Q3’s downpipe, the part that follows the turbo and houses the catalytic converter. In 200-cell form, it keeps the emissions control of a family SUV; in 100-cell form, it is accepted or not depending on the car and the rules in your country; in decat form, it is reserved for track use, which concerns few Q3s. The small TFSI gains no power without an ECU remap, only voice. 304 stainless steel is the most common choice; titanium, around 40% lighter, comes in brushed, gold or purple.
Audi Q3 / Q3 Sportback F3 exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicles and chassis code | Audi Q3 and Q3 Sportback F3, engine confirmed by the VIN |
| Engine | Turbocharged four-cylinder TFSI, 150 hp and 250 Nm |
| Years | Since 2018 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if fitted, otherwise the Rog remote |
| Front section (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days from confirmation to delivery, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Audi Q3 / Q3 Sportback F3 exhaust.
Which Q3 F3 is covered by this system?
The page is for the Q3 F3 with the 150 hp four-cylinder TFSI, on sale since 2018. For another engine, send us the VIN: we check before any manufacturing.
Does the Q3 F3’s map need changing with the system?
No, the cat-back alone gets along with the factory programme. With the downpipe, an ECU remap becomes useful to get power out of it; the Stage 2 figure shown on the page remains to be confirmed, so we do not repeat it.
Audi Q3 F3 TFSI with a Rog exhaust: what should you know about vehicle inspection?
With the cat-back only or the 200-cell sports catalytic converter, emissions control is retained: present the car with the valves closed. The 100-cell brings more sound and flow, and whether it is accepted at the emissions test depends on the car and local rules; the decat version is intended for track use.
How long does it take to equip the Q3 F3?
The system, built to your VIN, arrives within 20 working days of confirmation, with no delivery charge; a garage then fits it in about two hours.
Does the Q3 Sportback F3 take the same system as the Q3?
Yes. The Q3 and the Q3 Sportback F3 take the same Rog system: same chassis, same TFSI engines, same clamp-and-gasket fitting. Your VIN is only used to confirm the version and model year before manufacturing.
Audi Q3 / Q3 Sportback F3: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
Audi Q3 / Q3 Sportback F3: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
Audi Q3 / Q3 Sportback F3 exhaust system: the complete guide
The Q3 F3 is the everyday compact SUV, practical and discreet, very discreet. Our exhaust gives it a more assertive, rewarding tone that changes how it feels behind the wheel, while keeping family-friendly discretion just a press of the remote...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles