Valved Exhaust System for Audi RS3 8Y 2.5 TFSI (2021-2024)
Configuration
Audi RS3 8Y Valved Exhaust System (2021-2024)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
Which valved exhaust for an Audi RS3 8Y?
The Rog system for the Audi RS3 8Y is a valved cat-back exhaust in 304 stainless steel or titanium, built to your VIN for the 400 hp, 500 Nm 2.5 TFSI five-cylinder, with the Sportback or saloon body confirmed by the VIN. Valves open, the 1-2-4-5-3 firing order of the rally quattros comes back in full; closed, the RS3 fades into the background on the motorway.
Sound, options and fitting in detail: our Audi RS3 8Y guide.
The RS3 8Y keeps the 2.5 TFSI, a turbocharged inline-five with 400 hp and 500 Nm, voted best engine in its class several times. This page covers the 2021 to 2024 model years. Sportback or saloon, your RS3 is identified by its VIN when you order, and we confirm the system before building it.
The whole character of this engine lies in its 1-2-4-5-3 firing order, inherited from the rally quattros: a syncopated growl, half hoarse, half howling, that nothing else produces. The factory filters and silencers smother precisely the essential part. With the valves open, the valved Rog system sets it completely free, with a gust of sound under acceleration and rich crackles on the overrun. With the valves closed, the Audi becomes a civilised hatchback again, close to its original sound.
This is a cat-back: pipes, silencer, valves and round tips, from the downpipe to the tailpipes. It fits with clamps and gaskets, no welding, in about two hours. Two ways to control the valves: let the Audi drive modes decide, if the car has its factory valves, or use the Rog remote, which works whatever mode is selected.
On this five-cylinder, the “Manifold” option actually replaces the downpipe, the part that carries the catalytic converter at the turbo outlet and restricts the most after the silencer. With 200 cells, emissions control stays in place; with 100 cells, it is accepted or not depending on the car and the rules in your country. Without an ECU remap, expect sound and a little weight saving, not power. Material: 304 stainless steel, or titanium around 40% lighter, from brushed to purple by way of gold.
Audi RS3 8Y 2.5 TFSI exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | Audi RS3 8Y 2.5 TFSI, body style confirmed by the VIN |
| Engine | 2.5 TFSI, turbocharged inline-five, 400 hp and 500 Nm |
| Power in kW | 294 kW |
| Years | 2021-2024 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory drive modes or the Rog remote |
| Front section (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | No welding or cutting, about 2 hours on a lift |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Audi RS3 8Y 2.5 TFSI exhaust.
Sportback or saloon: which RS3 8Y is covered?
This page is for the 2021 to 2024 RS3 8Y 2.5 TFSI. Both body styles exist: give us your VIN, field (E) of your registration document (V5C in the UK) or at the base of the windscreen, and we confirm compatibility before any manufacturing.
Does the RS3 8Y need an ECU remap?
Not for the cat-back, which touches neither the engine nor the ECU. Yes if you want the downpipe to turn into horsepower: at Stage 2, the published figures for the RS3 8Y are 460 hp and 570 Nm. With a sport catalytic converter, the engine warning light may come on; an ECU remap or a diagnostic reset fixes it.
Audi RS3 8Y 2.5 TFSI with a Rog exhaust: what should you know about vehicle inspection?
The cat-back alone and the 200-cell downpipe keep emissions control: that is the configuration to present for vehicle inspection, valves closed, with a sound close to stock. The 100-cell depends on the car and the rules where you live. In decat form, the RS3 is intended for the track.
Can I keep the Audi valve control?
Yes, if your RS3 has factory valves: the system takes over their control and the drive modes stay in charge, with no extra box. Would you rather decide yourself? The Rog remote opens and closes them in one press.
200-cell or 100-cell on the 2.5 TFSI?
The 200-cell is the road choice: emissions control kept, flow noticeably freer. The 100-cell, for its part, is accepted or not depending on the car and the rules in your country; the decat version is reserved for track use. In both cases, the ECU remap is what makes the difference in power.
Audi RS3 8Y 2.5 TFSI: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
Audi RS3 8Y 2.5 TFSI: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
Best valved exhaust for Audi RS3 8Y
For an Audi RS3 8Y, Sportback or saloon, the best valved exhaust is the one made to your VIN, with a sound you choose, to give the five-cylinder back its rally rhythm. That is what the Rog exhaust offers: a...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles