Valved Exhaust System for BMW X5 M50i G05 4.4TT (2019-2022)
Configuration
BMW X5 M50i G05 4.4TT Valved Exhaust System (2019-2022)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The BMW X5 M50i G05 exhaust in detail.
The X5 M50i G05 is an athlete disguised as a tourer: a 4.4-litre V8 with its two turbos housed in the vee, 530 hp and 750 Nm sent to all four wheels by xDrive, in a large family SUV. Covered from 2019 to 2022, it sits alongside the six-cylinder X5 40i, while the facelifted X5 M60i and the X5 M F95 have their own pages.
The flip side of the hot-vee layout: a cross-plane V8 whose uneven rumble is rounded off by the turbines, then reduced by a heavily compartmentalised factory system to a deep breath, to the point of passing for a mere six-cylinder. With the valves open, our cat-back lets the V8 rumble at every start-up and swell under acceleration, with far more present downshifts; with them closed, the SUV becomes serene again, with nothing to disturb conversation on board.
For fitting, no blowtorch: clamps, gaskets and about two hours under this large SUV, with a system bent to its VIN and valves controlled by the factory switch or the Rog remote.
The “Manifold” option sells the front section that follows the V8’s turbos; with factory engine management, it affects the sound and the mass, with power coming from an ECU remap. A 200-cell catalysed front section keeps this family V8 able to control its emissions; the 100-cell is accepted or not depending on the car and the rules in your country, and the decat version is reserved for track use. As for material, 304 stainless steel nurtures the depth of the rumble, while titanium lightens the rear.
BMW X5 M50i G05 4.4TT exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | BMW X5 M50i G05, xDrive |
| Engine | 4.4-litre twin-turbo V8, turbos nestled in the vee, 530 hp and 750 Nm |
| Years | 2019-2022 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Front section (option) | Front section with a 200-cell or 100-cell catalyst, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours on a lift |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the BMW X5 M50i G05 4.4TT exhaust.
Can the X6 M50i or the X5 M60i take the X5 M50i system?
They are not listed for this system; the facelifted X5 M60i has its own page, and for an X6 M50i G06, see its own.
What power does an X5 M50i reach at Stage 2?
The page publishes 700 hp and 980 Nm, with front section and ECU remap entrusted to a specialist; the cat-back on its own is happy with the standard map.
A modified X5 M50i has to go through the vehicle inspection: what should I do?
Close the valves again, for a V8 as discreet as from the factory, and keep a front section that cleans the gases, factory or 200-cell; the 100-cell is accepted or not depending on the vehicle and your country’s rules, and the decat version is reserved for track use.
Why does the X5 M50i’s V8 sound like a six-cylinder from the factory?
Because its turbos inside the V round off the tone and the factory system reduces it further; our cat-back lets the V8’s rumble return with the valves open.
Does a large equipped V8 SUV stay comfortable on long journeys?
Yes, with the valves closed, the cruising silencer does its work and the X5 stays calm; the V8 only reveals itself when you ask.
BMW X5 M50i G05 4.4TT: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
BMW X5 M50i G05 4.4TT: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
BMW X5 M50i G05: the biturbo V8 athlete, the exhaust system guide
The X5 M50i G05 packs a 530 hp, 750 Nm 4.4 biturbo V8 into a large family SUV, and the result is an athlete disguised as a tourer. Yet its factory exhaust keeps most of what this V8 has to...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles