Valved Exhaust System for Bentley Continental GT / GTC W12 6.0 (2004-2010)
Configuration
Bentley Continental GT / GTC W12 6.0 Valved Exhaust System (2004-2010)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
BentleyContinental GT / Flying Spur (2004-2012)
The Bentley Continental GT / GTC W12 exhaust (2004 to 2010) in detail.
The first Continental GT, from 2004 to 2010, hides a 6.0-litre W12 under its long bonnet: two narrow-angle VR6 blocks joined on a common crankshaft, fed by two turbos. It produces 560 hp and 650 Nm, with continuous thrust at any pace. The 2011 to 2013 Continental GT W12, the GT V8 and the Flying Spur each have their own page.
A twelve-cylinder does not roar like a V8: its voice is denser and smoother, a broad rumble in which the combustions merge into one another. Behind the factory exhaust, only a hushed whisper remains, to the point that many owners do not know what their engine has to say. With the valves open, our valved cat-back brings a start-up that announces itself and a silky rumble that swells with every burst of acceleration; with the valves closed, the Bentley regains its cocooned atmosphere.
Our page covers the Continental GT W12 and its GTC convertible version. At the end of the system, paired round tailpipes; under the car, clamps and gaskets, no welding, for about two hours of fitting. Original valves retained if present, otherwise the Rog remote, with its box in the boot.
On this twin-turbo, the “Manifold” option on the page replaces the downpipes, which leave the turbos with the catalytic converters. For a GT that eats up the miles, the 200-cell downpipes make the most sense since they keep emissions control; with 100 cells, they are accepted or not depending on the car and the rules in your country, and their decat version is reserved for track use. Without an ECU remap, the 560 hp remain unchanged. 304 stainless steel suits the W12’s bass; titanium, around 40% lighter, adds a more metallic sparkle and comes in brushed, gold or purple.
Bentley Continental GT / GTC W12 6.0 exhaust specifications.
| System type | Valved cat-back (valve exhaust), paired round tailpipes, built to your VIN |
|---|---|
| Vehicles | Bentley Continental GT coupé and GTC convertible W12, first generation |
| Engine | 6.0-litre twin-turbo W12, 560 hp and 650 Nm |
| Years | 2004-2010 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if fitted, otherwise the Rog remote |
| Front section (option) | Downpipes with 200-cell or 100-cell catalytic converters, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Bentley Continental GT / GTC W12 6.0 exhaust.
Can my Continental GTC W12 convertible take this system?
Yes. The first-generation GT coupé and GTC W12 convertible share the chassis and the W12: the Rog system is built to your VIN and fitted with clamps and gaskets. Your VIN is only used to confirm the version and model year before manufacturing.
Which Stage 2 for a 560 hp Continental GT W12?
The cat-back works without an ECU remap. The first-generation W12 reaches 656 hp and 788 Nm in Stage 2 according to the page, provided you add the downpipes and entrust the map to a tuner who knows the platform.
Before vehicle inspection, what should be set on a first-generation Continental GT W12?
Present it with the valves closed, and the W12 regains the muffled murmur of the standard car. On the gas side, the cat-back alone and the 200-cell downpipes leave the catalytic converters working. With the 100-cell, acceptance depends on the vehicle and your country’s rules; the decat Bentley is reserved for the track.
What is the difference from the Continental GT W12 2011-2013 page?
Same engine layout, but a different generation, with power raised to 575 hp on the second. Each period has its own page; your VIN, checked when you order, confirms the right one.
Bentley Continental GT / GTC W12 6.0: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
Bentley Continental GT / GTC W12 6.0: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
Bentley Continental GT / GTC W12: twelve cylinders worth hearing, the exhaust system guide
Whether it belongs to the first series, from 2004 to 2010, or to the second generation, from 2011 to 2013, the Continental GT W12 rests on the same principle: a 6.0-litre twin-turbo twelve-cylinder in the service of grand touring. And...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles