Valved Exhaust System for BMW 340i B58 F30 / F31 3.0T (2016-2018)
Configuration
BMW 340i B58 F30 / F31 Valved Exhaust System (2016-2018)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
The BMW 340i F30 / F31 exhaust in detail.
The 340i F30 saloon debuted the B58: the mechanicals of an M340i ahead of their time, in an understated 3 Series that enthusiasts regard as one of the best hidden buys on the market. A 3.0-litre inline-six, twin-scroll turbo, very stiff closed-deck block: 326 hp and 450 Nm, for the 2016 to 2018 model years covered by this page. The preceding 335i F30 has its own page.
The factory filter and oversized silencers reduce the B58’s round, metallic voice to almost nothing. Our Rog cat-back, with no superfluous resonator or centre silencer, gives it back a round bass at idle, a full, even climb and crisp crackles with the valves open, without ever tipping into tiring drone. The everyday saloon is never far away: just close the valves again.
For installation, about two hours is enough, with clamps and gaskets, without welding, the system arriving built to your VIN. A 340i with factory valves continues to control them through its drive modes; without them, the Rog remote decides with two buttons.
On this B58, the “Manifold” option refers to the downpipe, where the catalytic converter sits at the turbo outlet; without an ECU remap, it only adds voice and a little lightness. Fitted with a 200-cell downpipe, the 340i saloon keeps treating its exhaust gases as it did from the factory; the 100-cell variant is accepted or not depending on the car and the rules in your country, and the decat version is reserved for track use. Material of the valved cat-back: 304 stainless steel for its roundness, titanium for its roughly 40% lower mass and its three finishes.
BMW 340i B58 F30 / F31 3.0T exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicles and chassis codes | BMW 340i F30 saloon and F31 Touring |
| Engine | B58, 3.0-litre turbocharged inline-six, 326 hp and 450 Nm |
| Years | 2016-2018 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory drive modes or the Rog remote |
| Front section (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours on a lift |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the BMW 340i B58 F30 / F31 3.0T exhaust.
Are a 340i Touring F31 or a 2019 model year covered?
Yes for the F31 Touring: the F30 saloon and the F31 Touring take the same Rog system, with the same B58 and the same clamp-and-gasket fitting. For a 2015 or 2019 340i, outside the years covered by this page, send us the VIN: we check before manufacturing.
How much headroom does the 340i’s B58 offer at Stage 2?
Considerable: with a downpipe and a map from an approved tuning centre, the page lists 440 hp and 620 Nm, against 326 hp and 450 Nm as standard; the cat-back on its own requires no ECU remap.
BMW 340i B58 F30 3.0T with a Rog exhaust: what should you know about vehicle inspection?
With the cat-back only or the 200-cell sports catalytic converter, emissions control is retained: present the car with the valves closed. The 100-cell brings more sound and flow, and whether it is accepted at the emissions test depends on the car and local rules; the decat version is intended for track use.
Why is the 340i so quiet from the factory?
Because the oversized filter and silencer, imposed by emissions standards, absorb the B58’s voice; our cat-back does not touch the engine and simply puts you back in control of the volume.
Do the 340i’s driving modes keep control of the valves?
It all depends on how your saloon is equipped: with factory valves, Comfort and Sport keep controlling the opening; without them, the Rog remote decides, independently of the selected programme.
BMW 340i B58 F30 / F31 3.0T: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
BMW 340i B58 F30 / F31 3.0T: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
BMW 340i F30 / F31: unleashing the B58, the complete exhaust system guide
The 340i F30 introduced the B58, and connoisseurs consider it one of the best hidden buys on the market: the mechanicals of an M340i before its time, in an understated saloon. All it lacks is a voice. Our exhaust system...
In detail
Unsure about your configuration?
Talk to us before you order. We know your car.
Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours.
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Exhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleExhaust resonator delete: what it really changes.
Louder, rawer, same power, possible drone: what a resonator delete really changes, backed by published tests.
Read the articleResonator vs muffler: centre silencer, rear silencer, what's the difference?
Resonator vs muffler: the silencer lowers the volume, the resonator shapes the tone. What each part of an exhaust does,...
Read the articleExhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
An exhaust resonator rounds off your exhaust's voice while keeping it fully sporty. What it does, its effect on sound...
Read the articleNo article matches this search.
All articles