Valved Exhaust System for Lexus GS F L10 V8 5.0 2UR-GSE (2015-2018)
Configuration
Lexus GS F L10 V8 5.0 Valved Exhaust System (2015-2018)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat manifolds + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Lexus GS F L10 V8 5.0 exhaust in detail.
A large saloon with 477 hp and 530 Nm, driven by a 5.0-litre naturally aspirated V8 that revs past 7,000 rpm: the 2015 to 2018 GS F L10 is a special case. Its 2UR-GSE, assembled with watchmaking precision, is among the finest modern V8s, but its factory exhaust is made so that you can hardly hear it.
Important: this page concerns the left-hand-drive GS F, the only configuration for which the front part is listed. For right-hand drive or any doubt about your car, the VIN, checked before manufacturing, decides. Among the other Lexus models with the V8 5.0, the IS F, RC F, IS500 and LC500 are covered by separate pages.
With the Rog valved cat-back, the big saloon changes character as soon as the valves open: the V8 gains presence at idle, then its howl becomes purer as it approaches 7,300 rpm. Closed again, the valves give the GS F back its calm as a long-distance cruiser. For fitting, allow about two hours under the car, no welding, and choose between the factory valve control, if it exists, and the Rog remote.
The “Manifold” option replaces the 2UR-GSE’s manifolds, which house the original catalytic converter. On a naturally aspirated engine, their geometry matters, and an ECU remap extracts a real but modest gain of around 3 to 8%; without one, it is the voice that benefits. On this four-door saloon, only the 200-cell version keeps emissions control; the 100-cell will be accepted or not depending on the car and the rules in your country, and the decat version is reserved for track use, somewhere the GS F rarely goes. The blued titanium round tips are the GS F’s signature, whatever the material of the system, 304 stainless steel or titanium around 40% lighter and finished in brushed, gold or purple.
Lexus GS F L10 V8 5.0 2UR-GSE exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN |
|---|---|
| Vehicle and chassis code | Lexus GS F L10 saloon, left-hand drive |
| Engine | 2UR-GSE, 5.0-litre naturally aspirated V8, 477 hp and 530 Nm |
| Years | 2015-2018 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Front section (option) | Manifolds with 200-cell or 100-cell catalytic converters, or decat |
| Fitting | Clamps and gaskets, no welding, about 2 hours |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Lexus GS F L10 V8 5.0 2UR-GSE exhaust.
My Lexus GS F L10 is right-hand drive: is the system compatible?
The front part on this page is listed for the left-hand-drive GS F. For a right-hand-drive car, do not order without a check: send us the VIN and we verify before manufacturing.
On the GS F L10, is an ECU remap worthwhile without the manifolds?
Hardly: the cat-back works with the 2UR-GSE’s factory map. It is with the manifolds that an ECU remap brings a modest gain, around 3 to 8%, the main benefit remaining the V8’s crescendo and breathing.
Does anything need removing on the GS F L10 before the vehicle inspection?
No, if you keep original or 200-cell manifolds: with the valves closed, the saloon regains its factory reserve, catalytic converters active. 100-cell manifolds will be judged according to the car and the rules in your country; in decat form, they do not leave the track.
Does the GS F L10 with a Rog system keep its grand touring comfort?
Yes. With the valves closed, it eats up the motorway without drone, like a standard GS F, and the 2UR-GSE’s howl remains an option, activated with a single gesture when the road suits.
Lexus GS F L10 V8 5.0 2UR-GSE: straight pipe or resonator?
On this model, two characters at the same price: the straight pipe for the raw sound of your engine, unfiltered, or the resonator for a rounder and slightly softer voice. Either way, the exhaust stays fully sporty. Learn more: Exhaust resonator: what does it do? Straight pipe or resonator, which sound to choose.
Rog expert guide
Lexus GS F exhaust: enhancing the naturally aspirated V8, the complete guide
The GS F is the connoisseur's under-the-radar saloon: the naturally aspirated 5.0 V8 in a rare, refined family car. A discreet future classic whose V8 sings muted from the factory: our exhaust opens up the score. For your Lexus GS...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles