Valved Exhaust System for Porsche Cayenne S 9YA / 9YB V6 2.9 biturbo (2018-2023)
Configuration
Porsche Cayenne S 9YA / 9YB V6 2.9 biturbo Valved Exhaust System (2018-2023)
Valves
Operated by remote control, factory-paired.
Estimated at 0.50 m from the outlet, 45°, 2,000 rpm with a warm engine. Allow ± 2 dB depending on the engine and measuring point. A 3 dB difference is audible in a direct comparison; 10 dB sounds roughly twice as loud.
Configuration guide
Sound intensity with the valves open, on a scale of 0 to 10.
| Configuration | Intensity |
|---|---|
| Decat downpipe + Rog cat-back | 10/10 |
| 100-cell sports catalytic converter + Rog cat-back | 9/10 |
| 200-cell sports catalytic converter + Rog cat-back | 8/10 |
| Rog cat-back only, factory catalytic converter retained | 7/10 |
| Factory exhaust, for comparison | 3/10 |
The Porsche Cayenne S 9YA / 9YB exhaust in detail.
The Cayenne S 9YA brings Porsche sportiness to a large SUV format: a 2.9-litre V6 with its two turbos housed in the centre of the V, 440 hp and 550 Nm, with torque available over a very wide range. This compact layout shortens the gas path and aids response. Our page covers the 2018 to 2023 model years; the 2024 V8 Cayenne S is not covered by this system.
Gruffer and more eager than a V8, with a hard, metallic note under acceleration, this V6 is, from the factory, only a distant background noise drowned out by tyre roar. With the valves open, the Rog valved cat-back gives the Cayenne S a present start-up and a frank sound with every burst of acceleration; with them closed, it becomes the restful big SUV of holiday departures once more.
The downpipe, with its catalytic converter, is ordered under the “Manifold” option. It is the only part that opens the way to more power, and only with an ECU remap; without one, you get sound and a little less mass. Of the sport downpipes, only the 200-cell version keeps emissions control.
About two hours on a lift, clamps and gaskets, no welding: the system installs without touching the V6. The Cayenne S’s factory valves stay controlled by the drive modes; if it has none, a Rog remote replaces them. Titanium around 40% lighter than 304 stainless steel for the same design, in brushed, gold or purple; three tip finishes to choose from, from chrome to blued titanium. The Cayenne 3.0, GTS and Turbo 9YA have their own page, and your VIN confirms yours.
Porsche Cayenne S 9YA / 9YB 2.9 V6 biturbo exhaust specifications.
| System type | Valved cat-back (valve exhaust), built to your VIN; fitted with clamps and gaskets, no welding, about 2 hours |
|---|---|
| Vehicles and generation | Porsche Cayenne S (type 9YA) and Cayenne S Coupé (type 9YB), 2.9 twin-turbo V6 |
| Engine | 2.9-litre twin-turbo V6 with turbos in the centre of the vee, 440 hp and 550 Nm |
| Years | 2018-2023 |
| Materials and finishes | 304 stainless steel or titanium; titanium in brushed, gold or purple |
| Valves | Factory valve control if the car has it, otherwise the Rog remote |
| Front section (option) | Downpipe with 200-cell or 100-cell catalytic converter, or decat |
| Tips | Chrome, gloss black or blued titanium |
| Manufacturing and delivery | Made to order, 20 working days, free delivery |
| Warranty | 3 years, parts and workmanship |
Questions about the Porsche Cayenne S 9YA / 9YB 2.9 V6 biturbo exhaust.
Can my 2024 V8 Cayenne S take this system?
No: this page targets the Cayenne S 9YA with the 2.9-litre twin-turbo V6, from 2018 to 2023, and excludes the 2024 V8 version. Send us its VIN if you would like us to look at what exists for it.
What can an ECU remap bring to the Cayenne S 9YA’s V6?
With the downpipe, the map is what turns the freed-up flow into power. Our sources do not yet agree on the Stage 2 figure for this version, so we do not quote one; the cat-back alone has no effect on the ECU.
Which parts should be kept to present a modified Cayenne S 9YA at vehicle inspection?
Valves closed, plus the factory or 200-cell downpipe: that is how emissions control and a sound close to stock are preserved. The 100-cell case is settled according to the vehicle and your country’s rules, which accept it or not, and the decat version, reserved for track use, sits poorly with a family SUV.
How long does it take to receive a Cayenne S 9YA system?
Twenty working days separate the confirmation of your order from delivery, made-to-measure manufacturing included. Delivery is free and signed for, then a mechanic fits the exhaust in about two hours.
Does the Cayenne S Coupé 9YB take the same system as the SUV?
Yes. The Cayenne S 9YA and the Cayenne S Coupé 9YB take the same Rog system, with the same 2.9 twin-turbo V6 and the same fitting. Your VIN is only used to confirm the version and model year before manufacturing.
Porsche Cayenne S 9YA / 9YB 2.9 V6 biturbo: Does a valved exhaust system drone?
No. With the valves closed, the gases flow through the whole rear silencer and the cabin stays calm at a steady speed. Our Rog exhausts are designed to avoid drone. Learn more: Why our systems stay calm on the motorway.
Rog expert guide
Porsche Cayenne S 9YA / 9YB V6 biturbo: the sporting soul of the SUV, the exhaust system guide
The Cayenne S 9YA lays claim to Porsche sportiness in a large SUV format. Under its bonnet, a 2.9-litre biturbo V6 with 440 hp and 550 Nm gives it the breath and torque of a true sports car. But on...
In detail
Rog Advisor
A question about this exhaust?
Fitment, sound, catalyst, valves, delivery: the answer comes straight away, with your configuration in context.
The Rog Advisor is an automated assistant trained on our product pages and answers. For an important decision, write to us: we confirm by e-mail.
Unsure about your configuration? Talk to us before you order. We know your car. Write to us at contact@rogmotorsport.com: we reply in writing, in English, within 24 hours. Email us
Reviews imported from our previous system and translated from French; verified purchases carry the badge.
Rog presentation film: choosing your vehicle, Standard or Equal Length design, stainless steel or titanium, Z-Pipe, controlled valves, titanium and tip finishes, and support from choosing your configuration through to shipping.
THE Rog CRAFT
Our process.
From the first bend to the last check. The same care at every step.
-
Design
Designed for your vehicle.
Geometry matched to your model, carefully studied bends and precise mounting points. Everything starts with accurate design.
-
Manufacture
Crafted with precision.
Tube bending, part fitting and TIG welding: every joint receives the same care.
-
Finishing
Material, elevated.
The finish reveals the character of the metal. Stainless steel or titanium, depending on the options available for your vehicle.
-
Assembly
Every part in its place.
Components are assembled and adjusted. On valved systems, the mechanism is fitted, set up and tested.
-
Inspection
Check. Then approve.
Geometry, welds, connections and gas flow: the key points are inspected before shipping.
-
Shipping
Ready to join you.
Reinforced packaging protects your exhaust in transit. The final step before giving your vehicle a new voice.
Customer builds
Your videos & photos
The Rog lines fitted on our customers' vehicles, in real conditions.
- Builds
- 500+
- Brands
- 28
- Satisfaction
- 4,9
The journal
News & advice
Best valved exhaust for the Audi RS3 8Y
Which valved exhaust for an Audi RS3 8Y? The options compared (sound, material, valves) and the Rog system made to...
Read the articleBest valved exhaust for the Mercedes-AMG A45 / A45 S W177
Which valved exhaust for a Mercedes-AMG A45 or A45 S W177? The options compared (sound, material, valves) and the Rog...
Read the articleBest valved exhaust for the BMW M2 G87
Which valved exhaust for a BMW M2 G87? The options compared (sound, material, valves) and the Rog system made to...
Read the articleExhaust rules: what changes in 2026 and 2027 (Euro 7, noise cameras, MOT)
Euro 7, new-car noise, noise cameras, MOT and vehicle inspection, and models: what really changes in 2026 and 2027 for...
Read the articleChanging your exhaust: what inspections and approvals cost in 9 countries
What the periodic inspection and the check of a modification cost after changing your exhaust, in 9 European countries: official...
Read the articleIs a cat-back exhaust legal in Ireland? What the NCT checks.
A cat-back leaves your factory cat, sensors and OBD as they are; valves closed, very close to stock, valves open,...
Read the articleSports exhaust (sportsummuti) in Estonia: what the tehnoülevaatus checks.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Estonia, how...
Read the articleSports exhaust in Latvia: tehniskā apskate and the CSDD noise limit.
The sound you choose, a discreet car when it matters: what a Rog valved exhaust gives you in Latvia, how...
Read the articleNo article matches this search.
All articles